Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

STM32F205RE

Updated: 2026-07-19

Overview

The STM32F205RE is part of STMicroelectronics' STM32F2 series of microcontrollers, based on the ARM Cortex-M3 architecture. It is designed for applications requiring a balance of performance and power efficiency. With its 120MHz operating frequency and extensive peripheral set, it is suitable for a wide range of embedded systems. The microcontroller integrates 512KB of Flash memory and 128KB of SRAM, providing ample space for complex applications. It also includes hardware support for communication protocols such as USB, CAN, SPI, I2C, and USART, making it versatile for various connectivity requirements.

Structure and Working Principle

原装STM32F205RET6 单片机MCU ST意法半导体 封装LQFP64 批号25+深圳市欣向阳科技有限公司

The STM32F205RE features a 32-bit ARM Cortex-M3 core, which executes Thumb-2 instructions for efficient processing. The core is supplemented by a nested vectored interrupt controller (NVIC) for handling real-time tasks. The microcontroller operates within a voltage range of 1.8V to 3.6V, making it suitable for battery-powered applications. Peripheral interfaces are managed through an advanced peripheral bus (APB) and an advanced high-performance bus (AHB), ensuring efficient data transfer between the core and peripherals. The device also includes a floating-point unit (FPU) for mathematical operations, enhancing its capability for signal processing tasks.

商家经验真实案例 · 安全可信
继电器红灯亮起怎么办
本文解析小型中间电磁继电器亮红灯的常见原因及处理方法,并介绍判断继电器工作状态的实用技巧,帮助快速定位问题并确保设备正常运行。

Key Features

One of the standout features of the STM32F205RE is its high-speed processing capability, achieved through the 120MHz Cortex-M3 core. This enables it to handle complex algorithms and real-time tasks efficiently. The microcontroller also supports low-power modes, making it suitable for energy-sensitive applications. Another key feature is its extensive peripheral set, which includes multiple communication interfaces (USB OTG, CAN, SPI, I2C), timers, and analog-to-digital converters (ADCs). These peripherals allow for seamless integration with sensors, actuators, and other components in embedded systems.

Application Areas

The STM32F205RE is widely used in industrial automation, where its real-time processing capabilities and robust communication interfaces are highly valued. It is commonly found in motor control systems, PLCs, and industrial gateways. In consumer electronics, the microcontroller is used in devices such as smart home systems, wearable technology, and audio equipment. Its low-power modes and high performance make it ideal for portable and battery-operated devices. Additionally, the STM32F205RE is a popular choice for IoT applications, thanks to its support for multiple communication protocols.

Maintenance and Precautions

STM32F205RET6 ST/意法半导体 MCU LQFP-64 2021+ 电子元器件代理深圳市创芯联盈电子有限公司

When working with the STM32F205RE, it is important to follow proper electrostatic discharge (ESD) precautions to avoid damaging the sensitive semiconductor components. Always use grounded workstations and anti-static wrist straps during handling. Ensure that the power supply voltage remains within the specified range (1.8V-3.6V) to prevent damage or erratic behavior. Proper decoupling capacitors should be placed near the power pins to stabilize the supply voltage and reduce noise.

商家经验真实案例 · 安全可信
笔记本屏幕b140和n140区别
本文详细解析笔记本屏幕B140和N140在技术参数、显示效果及应用场景上的核心差异,帮助用户根据需求选择更适合的屏幕类型。

B2B Procurement Guide

When procuring the STM32F205RE in bulk, consider working directly with authorized distributors or STMicroelectronics to ensure authenticity and reliable supply. Verify the manufacturer's part number and packaging specifications to avoid counterfeit components. For cost-sensitive projects, explore volume pricing options, which can significantly reduce the per-unit cost. Additionally, ensure that the supplier provides adequate technical support and documentation, such as datasheets and reference designs, to assist with integration.

Related Manufacturers