Aicaigou LogoB2B WikiIndustrial Encyclopedia

Standard Coke

Updated: 2026-07-20

Overview

Metallurgical coke is a processed carbon material produced by heating coal in oxygen-deficient ovens at 1000–1100°C (coking). This drives off volatile compounds, leaving a porous, high-carbon solid essential for metal smelting. China's GB/T 1996-2017 standard classifies coke by size (e.g., >40mm for blast furnaces) and quality grades (I to IV) based on ash, sulfur, and mechanical strength parameters. As a strategic industrial material, it accounts for 45–50% of ironmaking costs in blast furnaces. Its unique combination of thermal stability, permeability, and reducing capacity makes it irreplaceable for steel production despite emerging alternatives like pulverized coal injection (PCI).

Physical and Chemical Properties

定制负离子烧结陶瓷球 降低水氧化还原电位 抑制细菌繁殖灵寿县成江矿业加工厂

High-quality metallurgical coke exhibits 86–92% fixed carbon content, with ash typically below 12% and sulfur under 1%. Its porous structure (50–60% porosity) enables efficient gas flow in blast furnaces while providing structural support for the burden column. The CSR (Coke Strength after Reaction) index measures its resistance to degradation under high temperatures and CO2 exposure, with premium grades exceeding 60% CSR. Thermally, it combusts at ~2100°C with a calorific value of 28–30 MJ/kg. Key mechanical properties include M40 (abrasion resistance >80%) and M10 (shatter resistance <8%), tested via drum index methods. These metrics determine performance in industrial furnaces.

商家经验真实案例 · 安全可信
新特能源多晶硅产能大揭秘
本文详细解析新特能源多晶硅的产能数据,包括不同阶段的产能情况及未来规划,帮助读者全面了解其生产实力与发展潜力。

Main Applications

Over 90% of metallurgical coke supplies blast furnaces, where it fulfills three roles: 1) Fuel source for reaching 1600°C melting temperatures, 2) Reducing agent to convert iron oxides to metallic iron (Fe2O3 + 3CO → 2Fe + 3CO2), and 3) Permeable support for iron ore and limestone layers. Smaller fractions (10–25mm) serve in cupolas for cast iron production. Non-metallurgical uses include calcium carbide synthesis and as a carbon raiser in electric arc furnaces. Emerging applications involve wastewater filtration (activated coke) and silicon metal production, though these represent niche markets compared to steelmaking demand.

Safety and Storage

企安品牌打铁焦粒不规则块状1-3cm工业级国标焦炭宝丰县企安实业有限公司

As a combustible solid, coke requires storage away from ignition sources with adequate ventilation to prevent CO accumulation. Outdoor stockpiles should be covered or treated with anti-dust agents to minimize airborne particulate emissions. Moisture content should be maintained below 5% to preserve calorific value and avoid freezing in cold climates. Workers handling bulk coke need PPE including dust masks and heat-resistant gloves. Spontaneous combustion is rare but possible with fines (<10mm) due to pyrophoric iron sulfides. Facilities must comply with NFPA 120 (Coal Mine Fire Protection) standards for large-scale storage.

商家经验真实案例 · 安全可信
松针腐土能种花吗
松针腐烂后形成的腐殖土富含有机质,但直接使用可能影响植物生长。本文解析松针腐土的改良方法、适用植物类型及使用技巧,助你轻松打造健康花园。

B2B Procurement Guide

Industrial buyers should prioritize these specifications: 1) Fixed carbon ≥88% for blast furnace use, 2) Ash content ≤10% (lower reduces slag volume), 3) Sulfur ≤0.7% to avoid steel embrittlement, and 4) CSR ≥62% for prolonged furnace campaigns. Size distribution must match furnace requirements – typically 40–80mm for modern blast furnaces. Price fluctuations correlate with coking coal markets and steel output cycles. Long-term contracts with tier-1 producers (e.g., China Coal, ArcelorMittal) ensure stable supply, while spot purchases may yield 5–15% cost savings during market dips. Always verify third-party quality certificates like SGS reports for international shipments.

Related Manufacturers