Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

Spent Cathode Material

Updated: 2026-08-02

Overview

Waste cathode scrap is a byproduct of lithium-ion battery production and recycling, primarily composed of degraded cathode materials such as lithium cobalt oxide (LiCoO₂) or nickel-manganese-cobalt (NMC) compounds. These scraps are generated during battery manufacturing defects, end-of-life battery processing, or electrode trimming. Due to their high content of critical metals, they hold significant economic value for urban mining. Globally, over 500,000 metric tons of lithium-ion battery waste are produced annually, with cathode scraps representing a major fraction. Efficient recycling mitigates environmental risks while reducing reliance on virgin mineral extraction. The scrap's composition varies widely depending on the original battery chemistry, requiring tailored recovery processes.

Physical and Chemical Properties

嘉盛达 镍钴废料回收 三元正极材料 变废为宝 不限地区东莞市嘉盛达新能源有限公司

Waste cathode scraps typically appear as fine black powders or metallic flakes, often mixed with aluminum foil current collectors or binder residues. Their density ranges between 2.5–4.5 g/cm³, influenced by the metal oxides present. Common phases include layered LiCoO₂ (for consumer electronics) or spinel LiMn₂O₄ (for power tools). Chemically, these materials are stable under dry conditions but may react with moisture to form alkaline solutions. Thermal treatment above 300°C can decompose organic binders, releasing volatile compounds. The scraps are insoluble in water but dissolve in strong acids during hydrometallurgical recovery. X-ray diffraction (XRD) is commonly used to identify crystalline phases before processing.

商家经验真实案例 · 安全可信
铝合金光谱检测指南
本文解析铝合金直读光谱检测的核心要点,包括设备原理、操作要点和结果解读,帮助读者掌握这一高效的材料成分分析方法。

Main Applications

The primary use of waste cathode scrap is metal recovery through pyrometallurgical or hydrometallurgical processes. Pyrometallurgy involves smelting at high temperatures to produce alloy mixtures, while hydrometallurgy uses acid leaching to extract pure metals like cobalt (≥99.6% purity). Recovered metals are reused in new battery production or sold to other industries. Secondary applications include direct cathode regeneration, where the scrap is chemically relithiated to restore electrochemical performance. Some research explores using untreated scraps as catalysts or pigments. In B2B markets, high-cobalt scraps command premium prices due to cobalt's strategic importance, while low-grade mixes are often processed for bulk nickel or manganese recovery.

Safety and Storage

优势渠道 废钴泥回收 合理利用 当场结算 朋景新能源东莞市朋景新能源有限公司

Waste cathode scraps may contain residual electrolytes (e.g., LiPF₆) that hydrolyze to form toxic hydrofluoric acid. Proper storage requires airtight containers with desiccants to prevent moisture ingress. NFPA ratings typically include Health Hazard 2 and Reactivity 1 due to potential alkaline dust and minor flammability risks. Workers handling bulk quantities should wear NIOSH-approved respirators (N95 or higher), chemical-resistant gloves, and safety goggles. Facilities must comply with RCRA regulations for hazardous waste (U-list) in some jurisdictions. Storage areas should be ventilated and equipped with spill containment measures. Transport follows UN3077 (Environmentally Hazardous Substances) guidelines for international shipments.

商家经验真实案例 · 安全可信
沈阳废料回收指南
本文详细解析沈阳废料回收的市场现状、常见回收品类及操作流程,帮助企业和个人高效处理废弃资源,实现环保与经济双赢。

B2B Procurement Guide

When sourcing waste cathode scraps, buyers should prioritize suppliers with ISO 14001-certified recycling facilities. Key procurement parameters include: metal assay reports (e.g., ≥20% Co for premium grades), moisture content (<5%), and absence of physical contaminants like plastics. Spot prices fluctuate with LME metal rates—cobalt-rich scraps often trade at 60–80% of Co metal value. Contract terms should specify penalties for composition deviations and include sampling protocols (e.g., TCLP testing for leachable metals). For exporters, ensure compliance with Basel Convention Annex IX (B1110) for cross-border waste movement. Just-in-time purchasing is discouraged due to potential supply chain disruptions in the recycling sector.

Related Manufacturers