Overview
Solid acid resins are synthetic polymers with fixed acidic functional groups (e.g., sulfonic or carboxylic acids) attached to a porous matrix, typically styrene-divinylbenzene. They serve as reusable catalysts or ion exchangers in industrial processes. Unlike liquid acids, these resins offer precise control over reactions, ease of separation, and reduced corrosion. Their development dates to the 1940s, with modern variants optimized for stability and selectivity in harsh conditions.
Physical and Chemical Properties
The resins exhibit high mechanical strength and porosity, with surface areas of 20–50 m²/g. Functional groups determine acidity—sulfonated types (e.g., Amberlyst-15) are strongly acidic (pH <1), while carboxylated resins are weakly acidic. Thermal stability varies: most degrade above 150°C. Swelling in polar solvents (e.g., water) is common, increasing bead volume by 10–30%. Exchange capacities range from 1.5 to 5.0 milliequivalents per gram (dry weight).
Main Applications
In catalysis, solid acid resins enable green chemistry by replacing H₂SO₄ in esterifications (e.g., biodiesel production) and Friedel-Crafts reactions. They also purify water via cation exchange (e.g., removing Ca²⁺/Mg²⁺ in softening). Pharmaceutical industries use them for chiral separations, while mining sectors recover precious metals. Emerging uses include CO₂ capture and biomass conversion due to their recyclability.
Safety and Storage
Though non-flammable, resins may release SO₂ if overheated. Always store moist (e.g., in 50% ethanol) to prevent cracking. Use PPE when handling spent resins, which may contain heavy metals. Regeneration with HCl/NaOH requires ventilation. Shelf life exceeds 5 years if stored properly. Dispose as non-hazardous waste after exhausting capacity, following local regulations.
B2B Procurement Guide
Industrial buyers should prioritize suppliers with ISO 9001 certification. Key specs include total exchange capacity (TEC), particle size uniformity (0.3–1.2 mm), and operating pH/temperature limits. Bulk purchases (≥100 kg) often reduce costs by 20–30%. Test batches are recommended to assess fouling resistance. Leading manufacturers include Dow, Lanxess, and Mitsubishi Chemical.
Related Manufacturers
- 主营：环氧富锌底漆、丙烯酸聚氨酯面漆、有机硅耐高温漆、醇酸树脂、防火涂料、氟碳漆、钢结构漆、环氧云铁中间漆
- 主营：离子交换树脂、阳离子交换树脂、阴离子交换树脂、阳树脂、阴树脂、阴阳离子交换树脂、阴阳树脂、软水树脂、混床树脂、抛光树脂、001x7 树脂、软化水树脂、除盐水树脂、超纯水树脂、食品饮料水处理树脂、净水设备树脂、D113树脂、大孔吸附树脂、732树脂、D113丙烯酸树脂、碱性树脂、螯合树脂、超纯水抛光树脂、001×8软水树脂、多功能催化树脂
- 主营：海藻糖、柠檬酸、黄原胶、聚丙烯酸树脂、氯化钙、薄荷脑、泊洛沙姆、聚乙烯醇PVA、聚山梨酯、碳酸氢钠、注射蛋黄卵磷脂、注射大豆油、甘油、倍他环糊精、海藻酸钠、聚丙烯酸钠、酒石酸、丙二醇、聚乙二醇、HS15、聚氧乙烯40氢化蓖麻油、山嵛酸甘油酯、羟丙甲纤维素、羟苯甲酯钠
- 主营：花生酸、碳酸钠、单氟磷酸钠、马林酸树脂、丁基羟基茴香醚、鱼大豆酵母原料
- 主营：抗氧剂、乳化剂、苯扎氯铵、树脂、烷基二甲基、氢化蓖麻油、表面活性剂、双链季胺盐、聚氧乙烯醚、二丁基羟基甲苯、甘油聚氧丙烯醚、十二烷基硫酸钠、助剂
- 主营：离子交换树脂、大孔吸附树脂、螯合树脂、催化剂树脂、抛光树脂、混床树脂、食品级树脂、脱色树脂、变色树脂、植物提取树脂、电子级超纯水树脂、废气吸附树脂、D001强酸性阳树脂、D301阴离子交换树脂、D201强碱性阴树脂、001×7阳树脂、201×7阴树脂、D113树脂、固定化酶载体
- 主营：穩泡剂、洁模剂、乳化剂、tpr树脂、pua树脂、防沉剂、固化剂、除固剂、消臭剂、聚丙烯、疏水剂、dow醇醚、热锈宝、脱模剂、粘着剂、膨润土、清洗剂、eva乳液、脱泡剂、聚氨酯、防锈剂、弹性剂、催干剂、乳化型fc、抗静电剂
- 主营：福美钠、漂白粉、次氯酸钠、强氯精、漂粉精、DOP、DBP、蛋白胨
- 主营：锚固剂、硫酸铝、硫酸铜、732阳离子树脂厂家直销、切削液、氧化铜、溴化钠、大苏打、导热油、腐植酸、净洗剂、活性炭、水杨酸、硫酸锰、漂白粉、玻璃粉、茶皂素、丁酸钠、磷酸钙、甲酸钠、硬脂酸、消泡剂、酵母硒、磷酸铁、铵明矾、硫酸钡
- 主营：白炭黑、白僵菌、eva乳液、棕榈蜡、pvc发泡剂、聚碳酸酯、聚乙烯蜡、苯甲酸铵、t-31固化剂
- 主营：化学品、香精香料、试剂、橡胶树脂、中间体、有机硅、催化剂、纳米材料
- 主营：异辛醇、乳化剂、乙烯醚、醚羧酸、脂肪醇、分散剂、染色助剂、聚乙二醇、异构醇醚、泊洛沙姆、椰油酰胺、基羟乙基、烷基糖苷、特辛基酚、聚氧乙烯、嵌段聚醚、单油酸酯、异构十三醇、丙烯磺酸钠、氢化蓖麻油、丙烯酰胺基、醇醚葡糖苷、低泡渗透剂、甲酯乙氧基、癸基葡糖苷
- 主营：三氯乙烯、乙二醛、己二胺、1.4二氧六环、邻苯二酚、对苯二酚、间苯二酚、吗啉、乙酰丙酮、环己烯、对甲苯磺酸、喹啉、次磷酸、次磷酸钠、苄基三乙基氯化铵、偶氮二异丁腈、对苯二胺、间苯二胺、邻苯二胺、五氧化二磷、邻二氯苯、巯基乙醇、巴豆醛、正十二烷基硫醇、叔十二烷基硫醇
- 主营：薄荷脑、凡士林、聚乙二醇、聚丙烯酸树脂、卡波姆、甘油、明胶、蔗糖、丙二醇、蜂蜡、羟丙基倍他环糊精、聚维酮、海藻糖、石蜡、混合脂肪酸甘油脂
- 主营：黄血盐钾、黄血盐钠、氟化钾、双酚A固体环氧树脂、氟化钠、氟硅酸铵、水杨酸钠、聚六亚甲基胍盐酸盐、黄丹粉、九水硫化钠、红丹粉、氢氧化钡、氧化铋、对甲苯磺酸、二氧化硒、三硫代碳酸钠、醋酸铅、氯化铅、还原铁粉、碱式碳酸铅、次磷酸、对二氯苄
- 主营：硫酸烟酰苯胺、矮壮素、离子液体、聚丙烯酸树脂IV、海因环氧树脂、蓖麻油酸、椰油酰氯、4-滴钠盐、甘油磷酸酯、咪唑、亚麻酸乙酯、菜籽油甲酯、氟甲基磺、DL-泛酰酸内酯、2-辛烯基琥珀酸酐、4-二羟基蒽醌隐、5-二甲基吡唑