Aicaigou LogoB2B WikiIndustrial Encyclopedia

SN74LVC245A

Updated: 2026-07-19

Overview

The SN74LVC245A is a widely used octal bus transceiver manufactured by Texas Instruments. It facilitates bidirectional data flow between two independent buses, making it a critical component in systems requiring asynchronous communication. Designed with low-voltage CMOS technology, it supports voltage ranges from 1.65V to 3.6V, ensuring compatibility with modern low-power devices. The IC features 3-state outputs, allowing multiple devices to share a common bus without interference. Its high-speed operation (up to 24 MHz) and minimal propagation delay make it suitable for applications demanding efficient data transfer. The SN74LVC245A is commonly deployed in networking hardware, embedded systems, and industrial automation equipment.

Structure and Working Principle

SN74LVC245ADWR 封装SOIC-20-300mi TI德州仪器 缓冲器 驱动器 批次25+深圳市欣向阳科技有限公司

The SN74LVC245A consists of eight bidirectional transceiver channels, each controlled by a direction pin (DIR) and an output enable pin (OE). When OE is active, the DIR pin determines the data flow direction—either from A to B or B to A. This architecture ensures flexible bus management. Internally, the IC employs CMOS technology to minimize power consumption while maintaining high noise immunity. The 3-state outputs enter a high-impedance state when disabled, preventing bus contention. Overvoltage-tolerant inputs allow the device to withstand voltages exceeding the supply rail, enhancing robustness in mixed-voltage systems.

商家经验真实案例 · 安全可信
继电器红灯亮起怎么办
本文解析小型中间电磁继电器亮红灯的常见原因及处理方法,并介绍判断继电器工作状态的实用技巧,帮助快速定位问题并确保设备正常运行。

Key Features

The SN74LVC245A offers several advantages, including a wide operating voltage range (1.65V–3.6V), making it compatible with both 3.3V and lower-voltage systems. Its 3-state outputs enable bus sharing, while the bidirectional design simplifies circuit layouts. Additional features include ±24mA output drive capability, ensuring reliable signal integrity across long traces or heavily loaded buses. The device also incorporates power-off protection, preventing damage when the supply voltage is absent. These attributes make it a preferred choice for applications requiring reliable, high-speed data transfer.

Application Areas

The SN74LVC245A is extensively used in data communication systems, such as routers, switches, and network interface cards, where bidirectional data transfer is essential. It also finds applications in computing peripherals, including USB hubs and memory interfaces. Industrial automation systems leverage the IC for interfacing sensors, actuators, and control units. Its low-power operation and tolerance to electrical noise make it suitable for embedded systems, such as IoT devices and automotive electronics. The versatility of the SN74LVC245A ensures its relevance across diverse industries.

Maintenance and Precautions

SN74LVC245ADWR SN74LVC245 TI德州仪器 SOP-20 收发器芯片 原现可直拍深圳市芯齐壹科技有限公司

To ensure longevity, avoid exposing the SN74LVC245A to voltages beyond its specified limits (e.g., 4.6V absolute maximum). Proper ESD precautions, such as using grounded workstations and antistatic packaging, are critical during handling and installation. Thermal management is generally not a concern due to the IC's low power dissipation, but designers should adhere to recommended PCB layout practices, such as minimizing trace lengths and providing adequate decoupling capacitors. Regularly inspect solder joints and connections in high-vibration environments to prevent intermittent failures.

商家经验真实案例 · 安全可信
晶体二极管测量误差分析
本文探讨晶体二极管测量误差的来源,包括测试环境、设备精度及操作手法等关键因素,并提出减少误差的实用技巧,帮助读者获得更准确的测量结果。

B2B Procurement Guide

When procuring the SN74LVC245A in bulk, verify the manufacturer's authenticity to avoid counterfeit components. Texas Instruments and authorized distributors are reliable sources. Pricing varies based on quantity, packaging (e.g., tape-and-reel, tube), and lead time. Consider environmental certifications (e.g., RoHS compliance) if required for your industry. For prototyping, sample kits are often available. Evaluate alternative part numbers (e.g., SN74LVC245A-Q1 for automotive applications) if specialized features are needed. Always check datasheet revisions for the latest specifications.

Related Manufacturers