Aicaigou LogoB2B WikiIndustrial Encyclopedia

SN74HC367DR

Updated: 2026-07-15

Overview

The SN74HC367DR is a high-performance hex buffer and line driver integrated circuit (IC) designed for digital systems. Manufactured using CMOS technology, it offers low power consumption and high noise immunity. This IC is part of the 74HC series, known for its reliability in industrial and consumer electronics. The device features six independent buffers with 3-state outputs, allowing multiple devices to share a common bus without interference. Its wide operating voltage range (2V to 6V) makes it versatile for various applications, from microcontroller interfacing to memory address driving.

Structure and Working Principle

MAX1659ESA+ MAX145ACUA+TMAX9032AKA+TMAX7030LATJ+MAX34409ETE+深圳市友智联科技有限公司

The SN74HC367DR is housed in a 16-pin SOIC (Small Outline Integrated Circuit) package. Each of its six buffers has an input and an output pin, with two common output enable (OE) pins controlling the 3-state functionality. When OE is active, the outputs follow the inputs; when inactive, the outputs enter a high-impedance state. Internally, the IC uses CMOS transistors to achieve high-speed switching with minimal power dissipation. The buffered outputs can drive up to 7.8mA at 6V, making them suitable for driving multiple loads or long transmission lines.

商家经验真实案例 · 安全可信
贴片393电阻是多大
本文详细解析贴片393电阻的阻值、识别方法及常见应用场景,帮助读者快速掌握该型号电阻的核心参数与实际使用要点。

Key Features

The SN74HC367DR offers several advantages for digital design. Its high-speed operation (typical propagation delay of 11ns at 5V) ensures minimal signal distortion in time-critical applications. The 3-state outputs allow for bus sharing among multiple devices, a common requirement in microprocessor systems. Additional features include balanced propagation delays, symmetrical output impedance, and low power consumption (typical ICC of 2μA at room temperature). These characteristics make it particularly useful in battery-powered devices and other power-sensitive applications.

Application Areas

This IC finds widespread use in various digital systems. Common applications include memory address driving, bus interface buffering, and clock signal distribution in microprocessor systems. It's also used in industrial control systems for signal isolation and fan-out expansion. In consumer electronics, the SN74HC367DR appears in digital displays, smart home devices, and audio equipment. Its ability to drive capacitive loads makes it suitable for LCD interfaces and other display technologies requiring clean signal transitions.

Maintenance and Precautions

原装现货 STF13NM60N 封装TO-220F 种类MOSFET 一站式配单 欢迎询价深圳和润天下电子科技有限公司

Proper handling of the SN74HC367DR is essential for reliable operation. Standard CMOS precautions apply: avoid static electricity (use ESD-safe handling procedures), prevent input voltages from exceeding the supply rails, and ensure proper power supply decoupling. For long-term reliability, operate within specified temperature ranges (-40°C to +85°C for industrial grade). When designing PCBs, maintain proper trace lengths for high-speed signals and provide adequate ground planes to minimize noise interference.

商家经验真实案例 · 安全可信
393电阻阻值揭秘
本文解析393贴片电阻的阻值含义,解释三位数编码规则及常见应用场景,帮助读者快速识别这类贴片电阻的阻值特性。

B2B Procurement Guide

When sourcing SN74HC367DR ICs, verify the supplier's authorization status with the manufacturer (Texas Instruments) to ensure genuine components. Key procurement considerations include required quantity (available in reels of 2500 for production runs), lead time, and packaging options. Quality assurance should include checks for proper marking, date codes, and storage conditions. For reference, the current market price ranges from approximately $0.50 to $1.50 per unit in small quantities, with volume discounts available. Consider alternative packaging options (TSSOP, PDIP) if the standard SOIC-16 package doesn't suit your application.

Related Manufacturers