Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

SN74F244NSR

Updated: 2026-07-23

Overview

The SN74F244NSR is a high-performance octal buffer and line driver integrated circuit manufactured by Texas Instruments. As part of the 74F series of logic devices, it's designed for digital systems requiring bus driving capability. The device comes in a 20-pin SOIC package, making it suitable for space-constrained applications. This IC features eight buffers with 3-state outputs, allowing multiple devices to share a common bus without interference. The SN74F244NSR is particularly useful in microprocessor systems, memory interfaces, and other digital applications where signal buffering and driving capability are required.

Structure and Working Principle

SN74AHC1GU04DBVR 通用逻辑门芯片 反相器 TI 封装SOT23-5 批次new深圳市柒鑫微科技有限公司

The SN74F244NSR consists of eight independent buffer gates with two enable controls (1G and 2G), each controlling four buffers. When the enable input is low, the corresponding buffers are active and transmit data from input to output. When high, the outputs enter a high-impedance state. The device operates on standard TTL logic levels (0.8V low, 2.0V high) with improved speed and drive capability compared to earlier 74 series devices. The outputs can sink up to 64mA and source up to 15mA, making them suitable for driving multiple TTL loads or transmission lines.

商家经验真实案例 · 安全可信
proteus电容叫什么
本文解析Proteus软件中电容元件的命名规则,介绍其常见类型及仿真应用场景,帮助用户快速识别和选用合适的电容模型。

Key Features

The SN74F244NSR offers several notable features including fast propagation delay (typically 5ns), low power consumption (ICC typically 20mA), and high output drive capability. The 3-state outputs prevent bus contention when multiple devices are connected. Its industrial temperature range (-40°C to 85°C) and robust ESD protection (2000V HBM) make it suitable for demanding environments. The device is fully compatible with TTL input and output levels, ensuring easy integration with existing digital systems.

Application Areas

Primary applications include microprocessor bus interfaces, memory address and data bus driving, and general purpose digital signal buffering. It's commonly used in industrial control systems, telecommunications equipment, and computer peripherals. The SN74F244NSR is particularly valuable in systems requiring bidirectional data buses or where multiple devices need to share a common bus. Its ability to drive long transmission lines makes it suitable for backplane applications and system interconnects.

Maintenance and Precautions

MCP1407T-E/SN 隔离式栅极驱动器 Microchip 批号21+深圳市比恩瑞电子有限公司

Proper handling includes standard ESD precautions during installation and maintenance. The device should be stored in anti-static packaging when not in use. For optimal performance, ensure power supply decoupling capacitors (0.1μF) are placed close to the IC. Avoid exceeding maximum ratings (7V supply voltage, 500mA output current). Thermal considerations are important in high-frequency applications - proper PCB layout with adequate ground planes helps dissipate heat and reduce noise.

商家经验真实案例 · 安全可信
线圈电阻偏大原因
本文解析线圈电阻偏大的常见原因,包括材料特性、工艺缺陷和环境因素,并提供简单排查思路,帮助快速定位问题源头。

B2B Procurement Guide

When procuring SN74F244NSR in bulk, verify manufacturer authenticity to avoid counterfeit components. Texas Instruments offers volume pricing tiers, with significant discounts available for orders above 1,000 units. Consider lead time variations - while typically available from stock, demand fluctuations may affect delivery schedules. Many distributors offer value-added services like tape and reel packaging or programming for large orders. For critical applications, request full test documentation and consider automotive-grade alternatives if required.

Related Manufacturers