Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

SN74AHC2G14HDCTR

Updated: 2026-07-15

Overview

The SN74AHC2G14HDCTR is a dual Schmitt-trigger inverter integrated circuit (IC) manufactured by Texas Instruments. It belongs to the AHC (Advanced High-Speed CMOS) family, optimized for low power consumption and high-speed operation. The device is housed in a compact SOT-23-6 package, making it suitable for portable and space-sensitive applications. Schmitt-trigger inputs provide hysteresis, ensuring robust performance in noisy environments by preventing signal chatter. This IC is widely used in digital systems for signal conditioning, clock synchronization, and waveform shaping, offering reliable performance across industrial, automotive, and consumer electronics.

Structure and Working Principle

PE43711B-Z PIC16F1936-I/SS PMB6848.P10 REF192GRUZ-REEL7深圳万成佳业电子有限公司

The SN74AHC2G14HDCTR consists of two independent Schmitt-trigger inverters. Each inverter features a CMOS input stage with hysteresis, which switches output states at different voltage thresholds for rising and falling input signals. This hysteresis eliminates unintended toggling caused by slow or noisy inputs. The device operates over a wide voltage range (2V to 5.5V), supporting compatibility with TTL and CMOS logic levels. Internal circuitry ensures minimal propagation delay (typically 7.5 ns at 5V) and low static power consumption, making it energy-efficient for battery-powered devices.

商家经验真实案例 · 安全可信
双头电容三极管维修
本文详细解析双头电容三极管的常见故障现象、检测方法与维修技巧,提供实用解决方案,帮助读者快速恢复设备功能。

Key Features

Key features of the SN74AHC2G14HDCTR include its dual-channel design, which saves board space compared to single-gate solutions. The Schmitt-trigger inputs provide ±100 mV typical hysteresis, enhancing noise margins in industrial environments. The IC also supports high-speed operation with a typical propagation delay of 7.5 ns at 5V. Additional advantages include a wide operating temperature range (-40°C to 125°C), making it suitable for automotive and harsh industrial applications. The device is fully specified for partial-power-down applications using Ioff circuitry, which disables outputs to prevent backflow current when powered down.

Application Areas

The SN74AHC2G14HDCTR is commonly used in digital systems requiring signal conditioning, such as debouncing mechanical switch inputs or reshaping distorted clock signals. It is prevalent in IoT devices, wearables, and handheld electronics due to its low power consumption and small footprint. Industrial applications include PLCs (Programmable Logic Controllers) and sensor interfaces where noise immunity is critical. Automotive systems leverage its robustness for infotainment and control modules. The IC also serves as a building block in oscillator circuits and pulse generators for embedded systems.

Maintenance and Precautions

SN74AHC2G14HDCTR-P 电子元器件 TEXAS/TI 封装N/A 批次25+北京元坤伟业科技有限公司

To ensure longevity, avoid exposing the SN74AHC2G14HDCTR to voltages beyond its specified range (absolute maximum of 7V). Proper ESD precautions, such as using grounded wrist straps and anti-static mats, are essential during handling to prevent damage to CMOS components. For PCB layout, minimize trace lengths to reduce parasitic inductance and capacitance. Decoupling capacitors (0.1 µF) near the power pins are recommended to stabilize supply voltage. Thermal management is generally unnecessary due to the device’s low power dissipation, but adequate ventilation should be maintained in high-density designs.

商家经验真实案例 · 安全可信
1p三极管参数解析
本文详细解析1p三极管的关键参数,包括电流放大系数、集电极-发射极电压和功耗等核心指标,帮助读者快速掌握其性能特点和应用场景。

B2B Procurement Guide

When procuring the SN74AHC2G14HDCTR, verify authenticity by purchasing from authorized distributors like Texas Instruments or franchised partners to avoid counterfeit components. Bulk orders (reels of 3,000 units) typically offer cost savings. Lead times vary; allocate 2–6 weeks for non-stock items. Evaluate alternatives like the SN74LVC2G14 for lower-voltage applications (1.65V to 5.5V) or the NC7WZ14 for ultra-miniature packages. Request samples for prototyping to test performance under actual operating conditions. Ensure compliance with industry standards (e.g., AEC-Q100 for automotive use) if required.

Related Manufacturers