Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

SN74ACT16841DLR

Updated: 2026-07-31

Overview

The SN74ACT16841DLR is a high-performance 20-bit bus-interface flip-flop with 3-state outputs, manufactured by Texas Instruments. It is designed to facilitate data storage and transfer in digital systems, offering reliable performance in demanding applications. This IC is part of the ACT logic family, known for its high speed and low power consumption. The SN74ACT16841DLR operates over a wide voltage range, typically between 4.5V and 5.5V, making it versatile for various digital systems. Its robust design ensures stable operation even in industrial environments with high noise levels. The device is available in a compact SSOP (Shrink Small Outline Package) format, suitable for space-constrained applications.

Structure and Working Principle

TI  SN74ACT16841DLR SSOP56 2020+深圳市科亚奇科技有限公司

The SN74ACT16841DLR consists of 20 edge-triggered D-type flip-flops with 3-state outputs. Each flip-flop captures data on the rising edge of the clock signal, storing it until the next clock cycle. The 3-state outputs allow multiple devices to share a common bus without interference, enabling efficient data communication. Internally, the IC features advanced CMOS technology, ensuring low power dissipation while maintaining high-speed operation. The outputs can drive up to 24 mA, making them suitable for driving heavily loaded buses. The device also includes output-enable (OE) inputs, which place the outputs in a high-impedance state when deactivated, preventing bus contention.

商家经验真实案例 · 安全可信
tc4429参数与工作原理
本文详细解析TC4429芯片的关键参数、工作原理及其在单片机中的应用,帮助读者全面了解这款高效驱动器的技术特性和实用价值。

Key Features

The SN74ACT16841DLR offers several key features that make it a preferred choice for digital designers. Its high-speed operation, with propagation delays as low as 5 ns, ensures efficient data handling in time-critical applications. The device also features low power consumption, typically drawing less than 40 µA in standby mode. Another notable feature is its wide operating voltage range, which enhances compatibility with various digital systems. The 3-state outputs provide flexibility in bus-oriented designs, while the robust ESD protection (up to 2000 V) ensures durability in harsh environments. These features collectively make the SN74ACT16841DLR a reliable component for high-performance digital systems.

Application Areas

The SN74ACT16841DLR is widely used in data communication systems, where it facilitates efficient data transfer between multiple devices. Its high-speed operation and 3-state outputs make it ideal for bus interfaces in computers, servers, and networking equipment. In industrial automation, the IC is employed in control systems and PLCs (Programmable Logic Controllers) to manage data flow between sensors, actuators, and controllers. It is also used in consumer electronics, such as gaming consoles and smart home devices, where reliable data handling is essential. The versatility of the SN74ACT16841DLR ensures its applicability across a broad range of digital systems.

Maintenance and Precautions

TI 专用电源管理IC BQ294602DRVR 电池管理 Overvoltage Prot深圳市科亚奇科技有限公司

To ensure optimal performance and longevity of the SN74ACT16841DLR, proper handling and maintenance are crucial. Always use ESD (Electrostatic Discharge) protection when handling the IC to prevent damage from static electricity. Avoid exposing the device to voltages outside its specified range, as this can lead to permanent damage. During installation, ensure proper soldering techniques to avoid thermal stress. Store the IC in a dry, anti-static environment to prevent moisture absorption and electrostatic damage. Regular inspection of the device in operation can help identify potential issues early, such as overheating or signal degradation.

商家经验真实案例 · 安全可信
uln2003控制电机
本文详细解析ULN2003驱动芯片如何通过信号放大和电流控制来驱动步进电机或直流电机,包括电路连接方法和工作原理,帮助读者快速掌握电机控制技巧。

B2B Procurement Guide

When procuring the SN74ACT16841DLR in bulk for B2B purposes, consider factors such as lead time, supplier reliability, and pricing. Verify the authenticity of the product by purchasing from authorized distributors or directly from the manufacturer to avoid counterfeit components. It is advisable to request samples for testing before placing large orders to ensure compatibility with your system. Compare pricing from multiple suppliers, but prioritize quality and reliability over cost savings. Additionally, check for availability of technical support and documentation, which can be invaluable during integration and troubleshooting.

Related Manufacturers