Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

SN74ABT244A

Updated: 2026-07-25

Overview

The SN74ABT244A is a widely used octal buffer and line driver from Texas Instruments, designed to address signal integrity challenges in digital systems. It features eight non-inverting buffers with 3-state outputs, enabling efficient bus interfacing and data transmission. This IC operates at a voltage range of 4.5V to 5.5V, making it suitable for TTL-compatible systems. Its robust design ensures minimal signal distortion, even when driving high-capacitance loads or long transmission lines.

Structure and Working Principle

TLP250(TP1,F) 光电耦合器 TOSHIBA东芝 封装SOP-8 批次new深圳市柒鑫微科技有限公司

The SN74ABT244A consists of eight independent buffer gates, each with an output enable (OE) control pin. When OE is active low, the buffers transmit input signals to their outputs with minimal delay. When OE is high, the outputs enter a high-impedance state. The device utilizes ABT (Advanced BiCMOS Technology) to combine the low power consumption of CMOS with the high drive capability of bipolar transistors. This hybrid approach enables fast switching speeds (typically 3.5ns propagation delay) while maintaining compatibility with TTL voltage levels.

商家经验真实案例 · 安全可信
定制tpr芯片电源
本文探讨定制TPR芯片电源的关键要点,包括其应用场景、设计考量及性能优化,帮助读者了解如何根据需求定制合适的电源解决方案。

Key Features

The SN74ABT244A offers several notable characteristics for industrial applications. Its high output drive capability (±64mA at 5V) allows it to directly drive heavily loaded buses or transmission lines. Power consumption is minimized through advanced CMOS technology, with typical ICC currents below 10mA. The device also features power-up 3-state protection, preventing bus contention during system initialization. ESD protection exceeds 2000V (HBM), enhancing reliability in harsh environments.

Application Areas

This buffer/driver finds extensive use in digital systems requiring signal conditioning. Common applications include microprocessor/microcontroller interfacing, memory address driving, and bus isolation in industrial control systems. In telecommunications equipment, the SN74ABT244A serves as a line driver for backplane communications. Automotive electronics utilize it for signal distribution in infotainment and control modules. Its robust design makes it suitable for harsh industrial environments where signal integrity is critical.

Maintenance and Precautions

IXYS/艾赛斯  IXTQ140N10P MOSFET 140 Amps 100V 0.011 Rds深圳市东芯盛科技有限公司

Proper handling of the SN74ABT244A ensures long-term reliability. Always observe ESD precautions during installation, using grounded wrist straps and conductive work surfaces. Thermal management is generally not required for normal operation, but high-frequency switching in high-ambient-temperature environments may necessitate heat dissipation measures. For systems with frequent output transitions, consider adding small decoupling capacitors near the power pins to maintain signal quality.

商家经验真实案例 · 安全可信
六脚电源芯片
本文解析六脚电源芯片的核心功能与设计特点,包括其引脚定义、典型应用场景以及选型时的注意事项,帮助工程师快速理解这类紧凑型电源管理方案。

B2B Procurement Guide

When sourcing SN74ABT244A ICs, verify the manufacturer's authenticity to avoid counterfeit components. Texas Instruments offers multiple packaging options (SOIC, TSSOP, PDIP) with varying temperature grades (commercial, industrial). For high-volume purchases, consider authorized distributors who can provide batch traceability and extended warranties. Lead times typically range from 2-8 weeks for standard quantities. Evaluate alternative part numbers (like SN74ABT244ADW) for different packaging requirements while maintaining identical electrical characteristics.

Related Manufacturers