Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

SN7407DR Hex Buffer/Driver

Updated: 2026-07-20

Overview

The SN7407DR is a hex buffer/driver IC manufactured by Texas Instruments, part of the 7400 series of logic devices. It is designed to interface between low-voltage logic circuits and higher-voltage systems, making it ideal for industrial and automotive applications. The device features six independent buffers with open-collector outputs, allowing for flexible voltage level translation. The SN7407DR is widely used due to its robustness and ability to handle high voltages (up to 30V). It is commonly employed in systems where digital signals need to drive relays, lamps, or other high-voltage components. The IC is available in a standard SOIC package, making it easy to integrate into various circuit designs.

Structure and Working Principle

SN7407DR 总线缓冲器/驱动器/接收器/收发器 刚到现货,原厂原封深圳市深创盛科技有限公司

The SN7407DR consists of six independent buffer/driver circuits, each with an open-collector output. The open-collector design allows the output to be pulled up to a voltage higher than the supply voltage of the IC, enabling level shifting. Each buffer has a high input impedance, ensuring minimal loading on the driving circuit. When the input to a buffer is high, the output transistor turns on, pulling the output to ground. When the input is low, the output transistor turns off, allowing an external pull-up resistor to set the output voltage. This operation makes the SN7407DR suitable for driving inductive loads like relays or motors, where voltage spikes can occur.

商家经验真实案例 · 安全可信
103高压瓦片电容参数
本文详细解析103高压瓦片电容的关键参数,包括容量、耐压值和尺寸规格,帮助读者快速掌握该型号电容的核心特性与应用场景。

Key Features

The SN7407DR offers several key features that make it a versatile choice for high-voltage applications. Its open-collector outputs can handle voltages up to 30V, far exceeding typical logic levels. The device operates over a wide temperature range (-40°C to 85°C), ensuring reliability in harsh environments. Another notable feature is its high output current capability (up to 30mA per channel), enabling it to drive relatively heavy loads directly. The IC also has built-in clamp diodes on the outputs, providing protection against voltage transients. These features make the SN7407DR a robust solution for industrial control systems, automotive electronics, and other demanding applications.

Application Areas

The SN7407DR is commonly used in industrial automation systems, where it interfaces between low-voltage control logic and higher-voltage actuators like relays, solenoids, and motors. Its ability to handle inductive loads makes it particularly useful in these settings. In automotive electronics, the SN7407DR is employed in dashboard displays, lighting controls, and other systems requiring voltage level translation. It is also found in test and measurement equipment, where it buffers signals for external devices. The IC's reliability and wide operating range make it a popular choice across these diverse applications.

Maintenance and Precautions

SN7407DR 丝印7407 封装SOP-14 六路缓冲器/驱动器芯片 TI/德州仪器深圳市博雅盈达科技有限公司

To ensure long-term reliability, the SN7407DR should be operated within its specified voltage and current limits. Exceeding these ratings can lead to device failure or reduced lifespan. Proper heat dissipation is also important, especially when driving high-current loads. When designing with the SN7407DR, include appropriate pull-up resistors on the outputs to set the desired high-level voltage. Avoid leaving outputs floating, as this can lead to unpredictable behavior. Additionally, take care to minimize voltage spikes when driving inductive loads, using flyback diodes or other protective measures as needed.

商家经验真实案例 · 安全可信
家用风扇电容大小
本文解析家用风扇电容的常见容量范围,讨论不同风扇类型对电容的需求差异,并给出更换电容时的注意事项,帮助用户理解这一关键元件的作用。

B2B Procurement Guide

When procuring the SN7407DR in bulk, verify the manufacturer (Texas Instruments) and part number to ensure authenticity. Counterfeit components can be a concern in the electronics market. Check for certifications like RoHS compliance if environmental regulations apply to your application. Consider purchasing from authorized distributors to guarantee quality and availability. Lead times can vary, so plan accordingly for production schedules. For large orders, negotiate pricing based on volume, as discounts are often available. Always request samples for testing before committing to a large purchase to confirm compatibility with your design.

Related Manufacturers