Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

SN65HVD3082E

Updated: 2026-07-22

Overview

The SN65HVD3082E is a half-duplex RS-485 transceiver manufactured by Texas Instruments, widely used in industrial automation and long-distance communication systems. It complies with the TIA/EIA-485-A standard, enabling reliable data transmission over twisted-pair cables up to 1200 meters. The device operates at 3.3V or 5V, making it versatile for embedded systems. Designed for harsh environments, it integrates fail-safe circuitry to ensure logic-level outputs when inputs are open or shorted. Its robustness against electromagnetic interference (EMI) and electrostatic discharge (ESD) makes it a preferred choice for factory floors, HVAC systems, and process control networks.

Structure and Working Principle

ST意法 32位MCU STM32F401VEH6 STM32F401 BGA-100深圳市万佳城电子科技有限公司

The SN65HVD3082E consists of a differential driver and receiver pair, controlled by a single enable pin. The driver converts TTL/CMOS logic signals into balanced differential outputs (A and B lines), while the receiver translates differential inputs back to logic levels. Internal biasing resistors simplify network design by eliminating the need for external components. During operation, the device enters a low-power shutdown mode when disabled, reducing current consumption to <1µA. Its slew-rate-limited driver minimizes high-frequency noise, ensuring signal integrity even in electrically noisy environments. The transceiver supports up to 32 nodes on a single bus, adhering to RS-485 standards.

商家经验真实案例 · 安全可信
库存电子呆料回收
本文探讨了库存电子呆料回收的重要性、处理方式及其对企业资源优化的积极影响,帮助企业了解如何高效处理闲置电子物料。

Key Features

High noise immunity is achieved through a wide common-mode voltage range (±12V) and ±16kV ESD protection (HBM). The SN65HVD3082E operates across an industrial temperature range (-40°C to +85°C), suitable for outdoor or unheated spaces. Key power-saving features include a 1µA shutdown mode and low quiescent current (300µA typical). The device also offers thermal shutdown protection, automatically disabling the driver if junction temperatures exceed 150°C. Its short-circuit current limitation (±250mA) prevents damage during wiring faults.

Application Areas

Primary applications include industrial control systems like PLCs, motor drives, and sensor networks. The transceiver is also used in building automation for HVAC controls, lighting systems, and security devices. In renewable energy, it facilitates communication between solar inverters and monitoring equipment. Other uses encompass medical instrumentation, where reliable data transmission is critical, and agricultural automation for irrigation systems and livestock monitoring.

Maintenance and Precautions

TLC1543CN 模数转换器(ADC) TI/德州仪器 封装DIP20 批号19+深圳市泽晟半导体科技有限公司

For optimal performance, use 120Ω termination resistors at both ends of the RS-485 bus to prevent signal reflections. Avoid stubs in cabling, and maintain proper grounding to minimize ground loops. Regularly inspect connectors for corrosion in humid environments. When prototyping, ensure the PCB layout minimizes trace lengths between the transceiver and connector. Decoupling capacitors (0.1µF) should be placed close to the VCC pin. For high-noise installations, shielded twisted-pair cables with drain wires are recommended.

商家经验真实案例 · 安全可信
单片机与桂林
本文探讨了单片机技术在桂林地区的应用与发展,分析了桂林作为科技创新城市的潜力,以及单片机在本地产业升级中的作用。

B2B Procurement Guide

When sourcing the SN65HVD3082E, verify packaging options (SOIC-8 or VSSOP-8) to match assembly processes. Lead times typically range from 4-8 weeks for large orders; consider authorized distributors like Digi-Key or Mouser for guaranteed authenticity. Evaluate alternative parts like the MAX485 or LTC2865 if specific features (e.g., higher data rates or isolated variants) are needed. For cost-sensitive projects, inquire about volume pricing tiers—orders exceeding 1,000 units often qualify for 15-30% discounts. Always request factory lot codes to trace manufacturing dates.

Related Manufacturers