SMJ60(C)

Overview

The SMAJ60(C) is a surface-mount transient voltage suppression (TVS) diode designed to protect sensitive electronic components from voltage spikes and electrostatic discharge (ESD). Part of the SMAJ series, it features a compact DO-214AC (SMA) package, making it suitable for high-density PCB designs. This diode is widely used in telecommunications, automotive, and industrial applications where reliable overvoltage protection is critical. TVS diodes like the SMAJ60(C) operate by clamping excessive voltage to a safe level, thereby preventing damage to downstream circuitry. The '60' in its designation refers to its breakdown voltage of approximately 60V, with variants available for different voltage requirements. Its robust construction ensures compliance with international standards for surge protection.

Structure and Working Principle

深圳市永怡佳科技有限公司

The SMAJ60(C) consists of a silicon PN junction optimized for avalanche breakdown characteristics. When the voltage across the diode exceeds its breakdown threshold (60V), it enters a low-resistance state, diverting surge current away from protected components. This action occurs within nanoseconds, providing rapid response to transient events. Internally, the diode is designed to handle high peak pulse currents (up to hundreds of amperes) without degradation. The DO-214AC package offers excellent thermal performance, dissipating heat generated during surge events. Unlike traditional fuses, TVS diodes are reusable and require no replacement after activation, making them cost-effective for long-term use.

商家经验真实案例 · 安全可信

长晶和长电同档次吗

本文对比分析长晶和长电在技术路线、应用场景和市场定位上的差异，解析两者是否属于同一档次，帮助读者理解半导体产业链中的关键环节区别。

Key Features

The SMAJ60(C) offers a clamping voltage typically under 100V at its rated current, ensuring effective protection for low-voltage circuits. Its fast response time (less than 1 picosecond) makes it suitable for suppressing ESD and lightning-induced surges. The diode meets IEC 61000-4-2 (ESD) and IEC 61000-4-5 (surge) immunity standards. Additional features include low leakage current (microampere range) during normal operation and a wide operating temperature range (-55°C to +150°C). The SMAJ60(C) is available in both unidirectional (for DC circuits) and bidirectional (for AC circuits) configurations, providing flexibility for diverse applications. Its RoHS-compliant construction aligns with environmental regulations.

Application Areas

Primary applications include protection for data lines (USB, Ethernet), power supplies (AC/DC converters), and automotive electronics (CAN bus, sensors). In telecommunications, it safeguards base station equipment and fiber optic transceivers from lightning-induced surges. Industrial uses encompass PLCs, motor drives, and instrumentation exposed to voltage transients. The SMAJ60(C) is also deployed in consumer electronics (e.g., smartphones, tablets) for ESD protection on interfaces like HDMI and audio ports. Its compact size and reliability make it a preferred choice for space-constrained designs. In automotive systems, it protects electronic control units (ECUs) from load dump and jump-start voltage spikes, ensuring compliance with ISO 7637-2 standards.

Maintenance and Precautions

深圳市永怡佳科技有限公司

While TVS diodes require minimal maintenance, proper PCB layout is critical for optimal performance. Place the SMAJ60(C) close to the protected line's entry point, with short traces to minimize inductance. Avoid routing protected and unprotected lines in parallel to prevent coupling of transient energy. During installation, verify polarity for unidirectional diodes (marked with a cathode band). Exceeding the diode's peak pulse power rating (600W for SMAJ60(C)) may cause permanent damage. For high-risk environments (e.g., outdoor equipment), consider additional protection layers like gas discharge tubes or varistors in a coordinated protection scheme.

商家经验真实案例 · 安全可信

rl207二极管替代方案

本文介绍RL207二极管的常见替代型号和选择时的注意事项，帮助用户在需要时找到合适的替代方案。

B2B Procurement Guide

When sourcing SMAJ60(C) diodes, specify parameters like breakdown voltage tolerance (±5% or ±10%), packaging (tape-and-reel for automated assembly), and certification requirements (AEC-Q101 for automotive). Bulk purchases (1,000+ units) typically reduce per-unit costs by 20-30%. Reliable suppliers include authorized distributors of brands like Littelfuse, Vishay, or STMicroelectronics. Request factory test reports for surge current capability and thermal characteristics. For custom requirements (e.g., tighter voltage tolerances), consult manufacturers about parametric testing options. Lead times vary from stock availability (2-4 weeks) to 12+ weeks for specialized variants.