Overview
Silver-coated copper powder is a composite material where micron-sized copper particles are uniformly coated with a thin layer of silver. This hybrid combines copper's cost efficiency with silver's superior conductivity and oxidation resistance. It is commonly produced via electroless plating or electrochemical methods, ensuring consistent coating quality. Primarily used in B2B industrial applications, it serves as a budget-friendly alternative to pure silver powder in conductive formulations. The micron-grade particle size (typically 1–50µm) enables precise application in electronics and additive manufacturing.
Physical and Chemical Properties
The material exhibits a bulk density of 8.5–9.0 g/cm³, bridging the gap between pure copper (8.96 g/cm³) and silver (10.49 g/cm³). Its conductivity depends on the silver coating ratio, typically reaching 60–80% of pure silver's performance. The silver layer prevents copper oxidation, enhancing shelf life. Particle morphology is spherical or flake-like, with a smooth surface to ensure uniform dispersion in matrices like polymers or resins. Thermal stability is limited by copper's oxidation at high temperatures (>200°C in air), though the silver coating delays degradation.
Main Applications
In electronics, this powder is used in conductive adhesives for die-attach and PCB assembly, offering a balance of performance and cost. It is also a key component in EMI shielding paints for aerospace and automotive industries, where lightweight conductive coatings are required. The material is increasingly adopted in 3D printed electronics and flexible circuits due to its sinterability at lower temperatures compared to pure copper. Other niche uses include antimicrobial coatings and brazing alloys, leveraging silver's biocidal properties.
Safety and Storage
As a fine powder, it poses inhalation risks (potential lung irritation) and requires handling with NIOSH-approved respirators. Skin contact should be minimized using gloves, as copper dust may cause dermatitis. Store in a dry, inert environment (e.g., nitrogen-purged containers) to prevent oxidation. Spills should be cleaned with vacuum equipment to avoid dust dispersion. Compliance with local regulations (e.g., OSHA Hazard Communication Standard) is mandatory for workplace safety. Silver content may classify it as hazardous waste in some jurisdictions.
B2B Procurement Guide
Buyers should specify technical parameters: particle size distribution (D50 value), silver coating percentage (usually 5–20% by weight), and resistivity (target ≤10⁻⁴ Ω·cm). Bulk orders (100+ kg) often qualify for 10–15% discounts from suppliers. Quality verification methods include SEM for coating uniformity and EDS for elemental analysis. Preferred suppliers are those offering batch consistency certificates and technical support for application-specific optimization. MOQs vary but commonly start at 25 kg for custom grades.
Related Manufacturers
- 主营：喷涂镍粉、导电镍粉、金属硅粉、高纯银包铜粉、金属铬粉、金属钨粉、金属锰粉、球形铁粉、球形镍粉、稀有硒粉
- 主营：氧化铬粉、碳化钨粉、碳化钛粉、超细银包铜粉、高纯锡粒、金属铜粒、真空镀膜、高纯镍粉、高纯钴粉、金属氧化钴、高纯金属铝粒、高纯无氧铜颗粒
- 主营：硼化铌、铜基粉、碳化钽、银包铜粉、碳化钨、锰铁粉、催化剂、毛毡条、锂电池、锡铋粉、喷涂粉、硅铁块、解铌粉、铝青铜、合金粉、钼铁块、锗粉末、镍包铜、镍靶材、氧化锗、氧化锆、钴基粉、导热粉、细钒粉、纯银粉、锡半球
- 主营：镍粉、铜粉、铁粉、银包铜粉末、钴粉、高纯硅粉、铁合金粉末、镍基合金粉、铜合金粉末、钨合金粉、氧化粉末
- 主营：银包铜粉、铜粉
- 主营：高纯氧化镁粉、科研氧化镁粉、纳米氧化锌粉、微米级氧化锌粉、超细氧化锌粉、纳米氧化镁粉、高纯氧化锌粉、纳米级氧化锌粉
- 主营：解钴粉、锰铁粉、锂电池、银包铜粉、荧光粉、氧化锗、高温粉、氧化粉、属锇粉、铌铁粉、钨铁粉、青铜粉、硅铁粉、镍铁粉、属镉粉、黑铅粉、钒铁粉、钛铁粉、铬铁粉、白铜粉、金属镍、金属钨、抛光粉、硅锰粉、钴粉末、纯锗粉
- 主营：导热材料、屏蔽材料、导电银浆、导电银包铜粉、柔性电极材料、导电银胶、金浆、导电橡胶、镀银导电布、金粉、铂电极浆料、FPC软板、镀金导电布、银钯浆料、电阻浆料、导热相变材料、柔性电极
- 主营：等离子堆焊合金粉末、激光熔覆合金粉末、碳化钨合金粉、微米级银粉、镍基合金粉、铁基合金粉、钴基合金粉、喷涂铜焊丝、铝及铝合金焊丝、耐磨焊丝、不锈钢焊丝、金属工件涂层喷涂、种种金属颗粒粉末、焊接车刀
- 主营：高纯硒粉、高纯硅粉、进口硒粉、铜粉
- 主营：黑铬粉、tc4钛粉、粉碎机、合金粉、目镍粉、纯锡粉、纯银粉、镀膜球、500目纯、高硅粉、钴基粉、铁锡粉、纯钨粉、镍粉球、目银粉、镍基粉、粉铬粒、锡焊粉、硅粉石、高铬粉、导电粉、氮化硅、纯铜粉、纯铬粉、高纯铅粉
- 主营：纳米二氧化硅粉、二氧化锰、氧化铒、氧化钬、氧化镝、氧化镨、氧化铈、ATO、纳米氧化镱、纳米氧化钕
- 主营：轻质陶瓷、硬质合金、高强陶瓷、复合材料、低密度碳化物、超细钒碳化铝
- 主营：合金粉末、氧化系列、氮化粉末、碳化粉末、合金颗粒
- 主营：生物活性玻璃、烟酰胺、王浆酸、微米超细片状、赖氨酸、锆氟酸、氢化镁