Overview
Silicone oil, or polydimethylsiloxane (PDMS), is a synthetic polymer composed of repeating siloxane units. It is prized for its unique combination of properties, including thermal stability (-50°C to 250°C), water repellency, and low chemical reactivity. These characteristics make it indispensable in industries ranging from aerospace to personal care. First developed in the mid-20th century, silicone oils are now manufactured in varying viscosities (from 0.65 cSt to millions of cSt) to suit specific applications. Their molecular structure—flexible Si-O-Si backbones with organic side groups—confers both organic and inorganic material traits.
Physical and Chemical Properties
Silicone oils exhibit Newtonian flow behavior, meaning their viscosity remains constant under shear stress. Their low surface tension (~21 mN/m) enables excellent spreading and wetting capabilities. Unlike mineral oils, they resist oxidation and maintain performance across extreme temperatures. Chemically inert, PDMS is unaffected by dilute acids, alkalis, and UV radiation. However, concentrated acids/bases or fluorinated solvents may degrade it. The polymer's dielectric strength (~15 kV/mm) makes it valuable in electrical insulation.
Main Applications
In industrial settings, silicone oils serve as high-temperature lubricants for bearings and molds, antifoaming agents in chemical processing, and damping fluids in precision instruments. The cosmetics industry utilizes low-viscosity grades in hair conditioners and skin creams for their smooth texture. Medical-grade PDMS is used in syringes, catheters, and prosthetics due to biocompatibility. Recent innovations include its role in flexible electronics and as a carrier fluid in thermal management systems for batteries.
Safety and Storage
While generally safe, prolonged exposure to aerosolized silicone oil may cause mild respiratory irritation. Spills should be contained with absorbent materials to prevent slippery surfaces. Storage in HDPE or glass containers is recommended to prevent contamination. For food-contact applications, only FDA-approved grades should be used. Disposal must comply with local regulations; incineration yields silica and carbon dioxide without toxic byproducts.
B2B Procurement Guide
Buyers should prioritize suppliers with ISO 9001 certification and batch-specific COAs (Certificates of Analysis). Key specifications include viscosity (measured at 25°C), volatility (evaporation loss), and trace metal content for sensitive applications. Bulk purchases (drums or totes) typically offer 10–20% cost savings over retail packaging. For specialty grades (e.g., phenyl-modified or amino-functionalized), lead times may extend to 6–8 weeks due to custom synthesis.
Related Manufacturers
- 主营：全氟三丁胺、二苄叉山梨醇、六氟丙烯二聚体、硅氧烷、六氟环氧丙烷二聚体、异丙醇铝、纳米勃姆石、二异戊基硫醚、隐色结晶紫、邻菲罗啉
- 主营：架桥剂、YW100 锂萃取剂、端羧基液体丁腈橡胶、硅油混合物、10-羟基癸酸、苯乙烯磷酸、肉豆蔻酸镁、硬脂酸钴、全氟三丁胺、乙烯基磷酸二乙酯、磷酸锰铁锂、β-磷酸三钙、十一烯酸、钨酸铝、1-乙炔基环已醇、间二异丙苯、锂硅合金、溴甲酚绿、生物活性玻璃、溴代海因树脂颗粒、红铝、龙涎酮、原丁酸三甲酯
- 主营：甲酸镍、水苏糖、阻燃剂、硅氧烷、柠檬醛、西瓜酮、氢醌酯、卡必醇、消泡剂、磷酸铁、肉桂醇、肉桂醛、碳酸镉、磷酸铝、银墨水、椰油胺、封装胶、化合物、桦木油、稀释剂、羟乙基、乙硫氮、润肤剂、球虫酯、矮壮素、异龙脑
- 主营：抗氧剂、乳化剂、苯扎氯铵、环硅氧烷混合物、烷基二甲基、氢化蓖麻油、表面活性剂、双链季胺盐、聚氧乙烯醚、二丁基羟基甲苯、甘油聚氧丙烯醚、十二烷基硫酸钠、树脂、助剂
- 主营：全氟聚醚二醇、全氟三丁胺、聚硅氮烷、硅氧烷、特种硅油、特种硅树脂
- 主营：二甘醇、三甘醇、四甘醇、硅氧烷、丙二醇、1.3-丙二醇、二丙二醇、异己二醇、乙二醇丁醚、二乙二醇丁醚、三乙二醇丁醚、丙二醇甲醚、二丙二醇甲醚、丙二醇丁醚、二丙二醇丁醚、三醋酸甘油酯、乙二醇、甘油、正庚烷、异丙醇、异辛醇、一乙醇胺、二乙醇胺、三乙醇胺、太古油40%/60%、分散剂NNO系列
- 主营：5-三甲基己醛、正癸酸、樊多B醛、环苯基聚甲基硅氧烷、聚乙二醇甲醚甲基丙烯酸酯、山梨醇缩水甘油醚、聚苯胺、磷脂酸铵盐、谷胱甘肽、二氧化钒、三羟甲基氨基甲烷盐酸盐、3二羟基萘、二苯酮、庚酰氯、菲尼酮、茶香醇、苹果酸、菠萝醚
- 主营：硅油、硅烷偶联剂、硅树脂、硅氧烷、消泡剂、润湿剂、瓦克、陶氏、明凌、硅橡胶
- 主营：硅氧烷、香精香料、有机中间体、化工助剂
- 主营：化工产品、树脂、表面活性剂、聚二甲基硅氧烷、乳化剂、消泡剂、硅油、柔软剂、固化剂、抗静电剂、脱膜剂、起泡剂、水性材料、种子包衣、化妆品级原料、油包水乳化剂、水包油乳化剂、异构十二烷、金属脱膜剂、水性硬脂酸锌、塑料抗静电剂、环氧树脂固化剂、棉麻柔软剂、甲基硅油、水溶性硅油、CAB系列起泡剂
- 主营：联吡啶、阻燃剂、酸性橙、硅氧烷、胶黏剂、锂电池、磷酸铁、王浆酸、新戊酯、铁酸锰、乙氧基、香脂油、氟苯基、桦木油、稀释剂、羟乙基、蚁酸钠、乳化蜡、十八烷、萘甲醛、贝螺钉、海蓝腈、甲基橙、矮壮素、钴铬蓝、羊脂醛
- 主营：硅氧烷、化妆品原料、各种表面活性剂、纺织用化学原料
- 主营：阻燃剂、胶黏剂、热熔胶、硅氧烷、催化剂、纤维素、消光剂、清洗剂、催干剂、增稠剂、工业添加剂、疏水剂、润湿剂、乳化剂、乙烯胺、光稳定剂、增白剂、耐磨剂、群青、颜料、抗氧剂、蜡粉、塑料、涂料、膨润土
- 主营：化学试剂、生物试剂、分析试剂、硅氧烷、基准试剂、生化试剂
- 主营：硅氧烷、羟甲基脲、溴化钾