Overview
The sensor electric dynamometer represents a technological evolution from traditional hydraulic and eddy current dynamometers. It combines strain-gauge or magnetoelastic torque sensors with electrically regenerative loading systems to provide precise measurements while recovering energy. These systems are indispensable in modern test benches for electric vehicle motors, industrial gearboxes, and aerospace propulsion systems. Unlike passive dynamometers, electric variants actively control load conditions through four-quadrant operation, allowing both driving and braking modes. This enables comprehensive testing of power generation equipment and energy storage systems alongside conventional prime movers. Leading manufacturers integrate these dynamometers with IoT platforms for remote monitoring and predictive maintenance.
Structure and Working Principle
A typical sensor electric dynamometer comprises three subsystems: the torque transducer, loading motor/generator, and control electronics. The torque sensor, often using optical or magnetic principles, measures shaft deflection without physical contact to maintain accuracy. The electric machine (usually AC induction or permanent magnet type) functions bidirectionally—absorbing power during motoring tests and supplying power when testing generators. The control system employs PWM inverters and DSP controllers to maintain precise speed/torque setpoints. Advanced models feature real-time Fourier analysis for harmonic distortion measurement and CAN bus/J1939 interfaces for automotive applications. Cooling systems (air/water) dissipate residual heat not recovered through regeneration, which typically achieves 70-90% energy recovery efficiency.
Key Features
Modern electric dynamometers offer dynamic response times under 10ms, critical for transient testing of hybrid vehicle powertrains. Their non-inertial design eliminates the need for flywheel adjustments common in mechanical dynamometers. Precision angular encoders provide ±0.01° resolution for torsional vibration analysis. Regenerative units can feed up to 95% of absorbed energy back into the grid, significantly reducing testing facility operating costs. Integrated safety systems include overspeed protection, emergency brakes, and arc-flash prevention for high-voltage models. Many systems achieve ISO 17025-compliant accuracies of ±0.2% of reading for torque and ±0.1% for speed.
Application Areas
In automotive development, these dynamometers validate EV motor efficiency maps per ISO 8854 and SAE J2907 standards. Industrial applications include pump/fan performance certification (ISO 5198) and wind turbine gearbox endurance testing. Aerospace utilizes 50,000+ RPM models for APU testing with air-bearing supports. Emerging applications include robotics actuator characterization and microgrid component testing. Portable 500W-50kW units serve field testing of agricultural machinery and marine propulsion systems. Custom configurations support altitude simulation (combined with vacuum chambers) and extreme temperature testing (-40°C to +150°C).
Maintenance and Precautions
Monthly verification with reference torque cells maintains measurement traceability. Bearing lubrication intervals vary from 2,000 hours (grease) to continuous (oil-mist systems). Coolant purity should be monitored to prevent electrolytic corrosion in water-cooled stators. Installation requires precise shaft alignment (<0.05mm TIR) to prevent measurement errors and premature bearing wear. Electromagnetic shielding is critical when testing PWM-driven motors to avoid sensor signal interference. Cybersecurity measures are recommended for network-connected units to protect proprietary test data.
B2B Procurement Guide
Specify required torque range (peak vs continuous), base speed, and overload capability (typically 150% for 30 seconds). Consider future needs—modular systems allow later capacity upgrades. Evaluate control software features: script automation, MIL/SIL compatibility, and report generation formats. Lead times range from 8 weeks (standard) to 6 months (custom). Total cost of ownership analysis should factor in energy savings from regeneration. Preferred suppliers hold NVLAP-accredited calibration labs and provide traceable calibration certificates. Leasing options (3-5 year terms) are available for temporary test campaigns.
Related Manufacturers
- 主营：[]
- 主营：[]
- 主营：[]
- 主营：扭矩仪、执行器测试台、导播雷达、扭矩传感器、转矩转速传感器、测功机、定制扭矩传感器、压力传感器、称重传感器、张力传感器、动态扭矩传感器、悬臂梁传感器、电涡流测功机、PT100温度传感器、动态旋转扭矩传感器、电机扭矩传感器、静态扭矩传感器、磁粉测功机、液位传感器、装配式热电偶、扭矩测量仪、磁粉制动器
- 主营：减速器、加载试验台、钻具测试台、电力测功机、转矩转速传感器、电机测试台、车桥测试台、减速机测试台、齿轮箱测试台、曳引机测试台
- 主营：试验机、轮椅双辊疲劳试验机、轮椅跌落试验机、电力测功机、轮椅静态稳定性测试机、轮椅静压强度试验机、轮椅刹车疲劳试验机、电吹风老化试验机、直发器疲劳测试机、53点风筒温度测试仪、电吹风开关在线试验机、脚轮行走试验机、聚氨酯轮行走耐磨试验机、车架震动试验机、轮胎行走寿命试验机、轮胎冲击试验机、自行车综合试验机、滑板车行走寿命试验机、电热毯耐压试验机、电热毯动负载试验机、电热毯发热线弯曲试验机、手表扭转疲劳试验机、手机跌落试验机、牛仔布滚筒跌试验机、电脑转轴试验机、拐杖疲劳试验机
- 主营：复合电解板、1.2mm厚电解板、手术室电解钢板、测功机、实验边台、不锈钢产品、净化板材、电动平移门、防火净化窗、不锈钢门、钢质门、电解钢板、医院钢质门、净化窗、气密门、净化门、手工岩棉板、实验台、手术室快装板、模块化电解板、医院电解板、预喷涂电解板、净化钢制门、手术室专用电解板、医院病房钢制门
- 主营：测功机、发动机试验台
- 主营：空心轴、离合器、检测仪、测功机、刹车器、制动器、检测机、加工定、液压马达、测试系统、制动装置、测功系统、测试平台、型式试验、制动设备、交直流电机、负载试验机、测功试验机、电涡流缓速器、磁粉刹车装置、超薄磁粉刹车、磁粉刹车系统、磁粉离合设备、磁 粉刹车装置、薄膜线缆纺织机
- 主营：减速机、曳引机、发动机、传感器、测功机、制动器、测试台、试验台、高速电机、电动滚筒、同步电机、锚杆钻机、煤矿电机、测控电机、转矩转速、铸铁平台、钻机测试、电机测试、磁粉测功、油耗测试、磁粉离合器、电动自行车、高速电涡流、液压马达测试
- 主营：电涡流、智能电机、电机测试台、测功机、扭矩传感器、磁粉制动器、马达测试台、钻机测试台、内燃机测试台、减速机测试台、曳引机测试台
- 主营：电机试验台、动力测试设备、减速机试验台、测功机、水力测功机、电力测功机、电涡流测功机、测功器、水力测功器
- 主营：电涡流测功机
- 主营：扭矩仪、单法兰、力测量双、传感器、动态测力、扭矩检测、测试智能、法兰力矩、静态转矩、法兰测力、检测电梯、动态旋转、法兰旋转、法兰扭矩、法兰转矩、液压扳手、电机力矩、静态测力、电机扭矩、信号采集、测力转矩、扭力测量、量程测力、转矩转速、测力仪器
- 主营：减速机、电涡流、空心轴、测功机、电力测功、机测试、电回馈、测试台、控制器、试验台、测试系统、效率测试、电动工具、电机试验、变频电机、励磁电源、电机检测、差速电机、电机疲劳、铸铁平台、轮毂电机、电机效率、电机扭矩、磁粉测功、磁粉制动器
- 主营：学习板、仿真器、一体板、测功机、扩展板、核心板、至尊板、组态屏、开发板、实验箱、教学设备、同步电机、开发模块、实训系统、无刷电机、阵列模拟器、学习实验版、电气隔离模块、功率硬件模组、可编程直流电源
- 主营：脉冲测试台、脉冲疲劳试验机、自动增压系统、测功机、手动增压系统、胶管膨胀量、安全阀、耐压爆破测试台、液压阀测试台、液压泵马达测试台、液压缸测试台
- 主营：铸铁平台、大理石平台、t型槽平板、电力测功机试验台、电机试验台、大理石检测平台、焊接平台、CNC辅助工作台、大理石床身、大理石构件、大理石机械构件、大理石机台、机床垫铁、调整垫铁、减震垫铁、FDT机床垫铁、磨床调整垫铁