Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

Semi-micro Balance

Updated: 2026-07-31

Overview

Semi-micro analytical balances bridge the gap between micro and analytical balances, offering readability from 0.01mg to 0.1mg. They are essential instruments in laboratories where precise measurements of small samples are required. These balances are designed to minimize environmental interference, featuring draft shields and anti-vibration mechanisms. Modern semi-micro balances often include advanced features such as automatic internal calibration, touchscreen interfaces, and data connectivity options. They are widely used in pharmaceutical research, chemical analysis, and quality control processes where even minute measurement errors can have significant consequences.

Structure and Working Principle

PSK二手现货 2004年设备 12英寸晶圆 随时发货 刻蚀机TERA 21青岛佳鼎分析仪器有限公司

A semi-micro balance consists of a precision weighing cell, a draft shield enclosure, and a display/control unit. The electromagnetic force compensation principle is commonly used, where the force needed to balance the sample's weight is measured electronically. The weighing pan is typically made of stainless steel and is enclosed in a transparent draft shield to prevent air currents from affecting measurements. Advanced models include internal calibration weights that can be activated automatically or by user command, ensuring measurement accuracy over time and temperature changes.

商家经验真实案例 · 安全可信
K3泵头改装教程
本文详细介绍了K3泵头的改装步骤,包括准备工作、改装过程和注意事项,帮助读者顺利完成泵头改装,提升使用体验。

Key Features

The primary feature of semi-micro balances is their high precision, typically offering readability between 0.01mg and 0.1mg. Many models include automatic calibration systems that compensate for temperature fluctuations and other environmental factors. Other important features include multiple weighing units, statistical functions, user management systems, and connectivity options such as USB or Ethernet. Some models offer GLP/GMP compliance features for regulated industries, including comprehensive data logging and audit trail capabilities.

Application Areas

Semi-micro balances are indispensable in pharmaceutical laboratories for formulation development and quality control. They are also widely used in chemical research for precise measurement of reagents and in forensic laboratories for evidentiary weighing. In industrial settings, these balances are used for quality assurance in electronics manufacturing (e.g., weighing small components) and in jewelry production for precious metal measurement. Academic research laboratories across various disciplines rely on semi-micro balances for accurate sample preparation.

Maintenance and Precautions

上 海海恒 水专家 FA214 电子天平(210G)自动校准性能优越上海海恒机电仪表股份有限公司

Regular maintenance is crucial for maintaining accuracy. This includes periodic calibration using certified weights and keeping the balance clean from sample residues. The weighing chamber should be cleaned with mild detergent and a soft brush. Environmental factors significantly affect performance. The balance should be placed on a stable, vibration-free surface away from direct sunlight and drafts. Allow sufficient warm-up time (typically 1-2 hours) before use, and avoid temperature fluctuations in the weighing area.

商家经验真实案例 · 安全可信
离心机快速运转
本文探讨离心机快速运转的关键因素,包括设计优化、材料选择和维护要点,帮助提升离心机工作效率和使用寿命。

B2B Procurement Guide

When procuring semi-micro balances in bulk for laboratory or industrial use, consider the specific requirements of your applications. Evaluate the necessary readability, capacity, and additional features such as connectivity or compliance requirements. For institutional purchases, consider the total cost of ownership including maintenance contracts and calibration services. Reputable manufacturers typically offer service agreements and technical support. Request product demonstrations and check references from similar organizations before making large purchases.

Related Manufacturers