Overview
Sand tube temporary supports are essential construction components designed to bear heavy loads during temporary structural support operations. These devices consist of a cylindrical steel casing filled with precisely graded dry sand, which can be gradually released to lower supported structures in a controlled manner. Primarily used in bridge construction projects, these supports enable safe elevation adjustments during deck placement or bearing replacement. Their simple yet effective design has made them a preferred solution in civil engineering for decades, particularly in situations requiring millimeter-precise height control under substantial loads.
Structure and Working Principle
The standard sand tube support comprises three main components: an outer steel cylinder, an inner piston-like platform, and the sand filling. The steel casing typically features a discharge valve at its base to regulate sand flow. When the valve is opened, sand escapes gradually, causing the inner platform to descend smoothly. This controlled descent mechanism allows for precise lowering of supported structures at rates as slow as 1-2mm per minute. The load-bearing capacity directly relates to the cylinder diameter and wall thickness, with industrial models commonly rated between 100-500 tons. Some advanced versions incorporate measurement scales and locking mechanisms for enhanced operational safety.
Key Features
Sand tube supports offer several advantages over hydraulic alternatives in temporary support applications. Their purely mechanical operation eliminates potential hydraulic fluid leaks and requires no power source, making them reliable in remote construction sites. The sand medium provides inherent vibration damping properties beneficial during sensitive operations. The adjustable height range typically spans 200-800mm, with some heavy-duty models exceeding 1m. Unlike screw-type supports, sand tubes allow continuous height reduction without requiring manual readjustment. Their reusable design makes them cost-effective for contractors handling multiple projects, though sand quality should be verified before reuse to prevent valve clogging.
Application Areas
Bridge construction represents the primary application, particularly during beam launching and deck placement operations. Sand tube supports temporarily bear the full bridge deck weight while allowing controlled lowering onto permanent bearings. They're equally valuable in seismic retrofitting projects where existing structures require temporary support during bearing replacement. Beyond civil engineering, these supports see use in industrial plant maintenance for heavy machinery alignment and in shipbuilding for hull section positioning. Their ability to handle both static and dynamic loads makes them suitable for temporary support during earthquake repairs where aftershock protection is required.
Maintenance and Precautions
Proper maintenance ensures optimal performance and safety. After each use, the sand should be completely drained and inspected for moisture absorption or contamination. Steel components require rust prevention treatment, especially when used in coastal environments. Valve mechanisms need lubrication with dry graphite powder to prevent sand-induced wear. Critical precautions include verifying the load rating before use and ensuring the installation surface is perfectly level. Uneven surfaces may cause asymmetric sand flow, potentially leading to sudden tilting. During operation, personnel should monitor sand discharge rates continuously and have emergency shoring available in case of unexpected settlement acceleration.
B2B Procurement Guide
When sourcing sand tube supports, prioritize manufacturers with bridge construction experience. Key specifications to evaluate include: load capacity with at least 20% safety margin over project requirements, cylinder wall thickness (minimum 8mm for standard applications), and valve mechanism reliability. Request certified load test reports for high-capacity units. Consider modular systems that allow height extension through stackable units for projects with variable requirements. Lead times for custom configurations typically range 4-8 weeks. For international procurement, verify sand quality compliance with destination country environmental regulations, as some jurisdictions restrict certain sand types.
Related Manufacturers
- 主营：卸落装置、卸落支架、落架工具、桥梁卸落块、卸落支座钢楔块
- 主营：盆式橡胶支座、板式橡胶支座、桥梁伸缩缝、桥梁卸沙式砂桶支座、梳齿板伸缩缝、桥梁卸落块、声测管
- 主营：球形滑动支座、桥梁橡胶支座、桥梁伸缩缝、沙桶支座、网架支座、抗震球形支座、球铰支座
- 主营：塑料模板、组合模板、拱形骨架模具、沙筒、防撞墙模板、塑钢模板、水沟模板、隔离墩模具、检查井模具、井室模具、盖板模具、平面钢模板、六棱块模具、扭王块模具、植生块模具、现浇模板、水泥墩模板、流水槽模具、遮板模具、框格护坡模板
- 主营：桥梁伸缩缝、梳齿板伸缩缝、模数式伸缩缝、沙筒临时支座、抗震球形钢支座、盆式橡胶支座、板式橡胶支座、固定球铰支座、滚动钢支座、遇水膨胀橡胶止水条、双组份聚硫密封胶、网架支座、临时砂筒支座、桥梁卸落块、桥梁铸铁护栏支架、橡胶止水带(条)、伸缩缝风琴胶条
- 主营：地铁管片预埋件、高铁桥梁配件、钢横梁、国标承重沙筒、预埋t钢、吊围栏、检查梯、防落梁挡块、支座钢板、声屏障立柱、接触网、桥栏遮板、栏杆预埋件、预埋螺栓、预埋钢板、预埋套筒、桥梁护栏遮板预埋钢板、桩基螺旋筋、带肋螺旋筋、304不锈钢螺母筒、桥梁抗震挡块、隧道钢制金属接线盒、高铁接触网预埋件、高铁接触网墩头螺栓、电力角钢支架
- 主营：桥梁橡胶支座、桥梁伸缩缝、桥梁接线箱、临时支座、桥梁集水井、渗水弹簧钢管、桥梁抗震拉杆、金属波纹管、塑料波纹管、橡胶垫块、抗震锚栓、卸落块、聚乙烯闭孔泡沫板、聚乙烯闭孔泡沫棒、聚乙烯止浆条、橡胶止水带、管道封堵气囊、橡胶气囊充气芯模、紫铜止水板、桥梁泄水管、双组份聚硫密封胶、护栏支架、免凿毛止浆带、遇水膨胀止水条、橡胶抽拔棒
- 主营：圆形板式橡胶支座、矩形板式橡胶支座、聚乙烯闭孔泡沫板、沙筒支座、双组份聚硫密封胶、40型桥梁伸缩缝、60型桥梁伸缩缝、80型桥梁伸缩缝、160型桥梁伸缩、丁基腻子钢板橡胶止水带、网架橡胶支座、D型桥梁伸缩缝、C型桥梁伸缩、E型桥梁伸缩缝、F型桥梁伸缩缝、Z型桥梁伸缩缝、中埋式橡胶止水带、钢边橡胶止水带、外贴式橡胶止水带、氯丁橡胶棒、160型模数式桥梁伸缩缝、Z9-30型橡胶止水带、651型橡胶止水带、JPZ盆式橡胶止水带、GPZ盆式橡胶支座、双组份聚氨酯密封胶
- 主营：[]
- 主营：球饺支座、橡胶垫块、橡胶隔震支座、桥梁临时支座、抗震滚轴支座
- 主营：桥梁支座、建筑钢结构球型支座、球铰支座、T梁临时支座、盆式支座、桥梁伸缩装置、钢结构支座、橡胶支座、桥梁伸缩缝、橡胶垫块、球形支座、板式橡胶支座、抗震球型支座、弹性钢支座、球型钢支座、盆式橡胶支座、止水带、密封胶、网架支座
- 主营：pe塑料片、护栏支架、充气芯模、桥梁预制临时支座、橡胶支座、海瑞止水环、缓膨止水条
- 主营：止浆棒、止水带、护栏板、纱桶沙箱、热熔垫片、隔震支座、橡胶垫块、橡胶气囊、伸缩接缝、橡胶支座、防震钢套筒、预埋集水箱、铸铁泄水管、雨水收水盒、闭孔泡沫板、防撞护栏支架、防撞墙用护栏、预应力波纹管、防水橡胶套环、桥梁毛面止浆带、混凝土隔断气囊、遇水膨胀止水胶、遇水膨胀止水条
- 主营：声测管、预应力波纹管、钢纤维、砂筒临时支座、波纹管、止水带、橡胶支座、橡胶充气芯膜、橡胶板、沥青胶泥、伸缩缝、护栏支架、水堵、盆式支座
- 主营：桥梁橡胶支座、板式橡胶支座、盆式支座、球形支座、球铰钢支座、网架支座、成品支座、卸落块、调坡器、钢结构支座、桁架支座、滚轴支座、伸缩缝、接线箱、集水井、变形缝、梳齿板伸缩缝、抱箍、弹簧钢管、泄水管、PVC泄水管管卡、双组份密封胶、钢遮板、沥青胶泥