Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

Sand-coated Polyester Base

Updated: 2026-07-19

Overview

Sand-faced polyester base is a specialized reinforcement material primarily used in the production of waterproofing membranes. The material consists of high-tenacity polyester fibers woven into a stable fabric, with one surface coated with fine mineral particles to create a textured 'sand' finish. This construction provides dual benefits: the polyester base offers exceptional tensile strength and puncture resistance, while the sand-coated surface significantly improves bonding with bitumen or other waterproofing compounds. The product is manufactured in rolls of varying widths (commonly 1m to 2m) and lengths (typically 20m to 50m per roll).

Physical and Chemical Properties

自粘聚合物改性沥青防水卷材聚酯胎片岩面黄沙面防水材料厂家供应广东双虹防水保温工程有限公司

The material exhibits excellent mechanical properties, with typical tensile strength ranging from 500-800 N/5cm in both longitudinal and transverse directions. Its elongation at break is usually 30-50%, allowing for some movement in construction applications without tearing. Chemically, the polyester base demonstrates strong resistance to most acids, alkalis, and organic solvents. The sand coating is typically mineral-based (often quartz), providing thermal stability up to approximately 150°C. The composite material maintains flexibility at temperatures as low as -20°C, making it suitable for diverse climatic conditions.

商家经验真实案例 · 安全可信
屋面浅色涂料定额解析
本文针对屋面浅色涂料保护层的定额选择问题,从材料特性、施工工艺和成本控制三方面进行解析,帮助读者合理选择定额方案并优化施工流程。

Main Applications

This material serves as a critical component in modified bitumen waterproofing systems for flat roofs, basements, and underground structures. The sand-textured side bonds securely with hot-applied bitumen, while the smooth side allows for proper adhesion of finishing layers. Additional applications include bridge deck waterproofing, tunnel linings, and foundation protection in civil engineering projects. Some manufacturers also utilize it as a carrier for self-adhesive membranes, where the textured surface improves peel strength. In certain markets, it's specified for use in green roof systems due to its durability and root resistance.

Safety and Storage

聚合物改性沥青PB I胎体增强型水性防水涂料源头直供施工简单广东财领头新材料有限公司

While generally safe to handle, precautions should be taken when cutting the material to avoid fiber inhalation. The mineral coating may produce dust during processing, requiring appropriate respiratory protection in confined spaces. For optimal storage, rolls should be kept upright in a dry environment (relative humidity below 70%) at temperatures between 5-35°C. Avoid stacking more than four rolls high to prevent deformation. The material should be protected from direct sunlight during prolonged outdoor storage, as UV exposure can gradually degrade the polyester fibers.

商家经验真实案例 · 安全可信
防水沥青价格指南
本文解析防水沥青的常见价格区间,影响因素包括类型、规格和市场波动,并提供选购建议,帮助买家做出合理决策。

B2B Procurement Guide

When sourcing sand-faced polyester base, verify the material meets relevant industry standards such as GB/T 17987 (China) or EN 13707 (Europe). Key specifications to confirm include tensile strength, tear resistance, and dimensional stability under heat. For large projects, request factory production control certificates and third-party test reports. Consider ordering pre-cut widths to minimize jobsite waste. Lead times typically range from 2-4 weeks for standard products, with MOQs commonly set at 5,000-10,000 m² for direct factory purchases. Some manufacturers offer custom coatings (heavier sand layers) for specialized applications.

Related Manufacturers