Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

Rubber Particles

Updated: 2026-08-03

Overview

Rubber particles are granular materials produced from natural or synthetic rubber, often through grinding or cryogenic processing. They are a versatile additive in industrial and consumer products, valued for their elastic and durable properties. Recycled rubber particles, sourced from end-of-life tires, are increasingly popular due to sustainability benefits. These particles vary in size (from microns to millimeters) and composition, depending on their source and intended use. They are commonly classified by mesh size (e.g., 10–40 mesh for coarse applications) and may undergo surface treatments to improve compatibility with matrices like asphalt or plastics.

Physical and Chemical Properties

白色ABS吹膜粒子 橡胶塑料填充料 防腐耐候 强拉伸 抗冲击廊坊柒胜再生资源回收有限公司

Rubber particles exhibit high elasticity, with elongation at break values exceeding 300% for natural rubber variants. Their abrasion resistance makes them ideal for high-wear applications like tire treads. The particles are thermally stable up to approximately 120–150°C, beyond which degradation begins. Chemically, they resist water and mild acids/alkalis but swell in non-polar solvents like gasoline. Surface treatments (e.g., silanization) can enhance adhesion to polymers or metals. Density ranges from 0.9–1.2 g/cm³, lower than many fillers, contributing to lightweight composites.

商家经验真实案例 · 安全可信
COP和PPSU哪个好注塑
本文对比COP和PPSU两种材料的注塑特性,从流动性、热稳定性、成品精度三个方面分析它们在不同应用场景中的表现,帮助工程师根据需求选择合适的材料。

Main Applications

In tire manufacturing, rubber particles are blended into compounds to improve traction and reduce rolling resistance. They are also a key component in adhesives and sealants, providing flexibility and bond strength. Coatings with rubber particles offer impact resistance and noise damping, used in automotive underbody sprays. Other applications include synthetic sports turf (as infill for shock absorption), rubberized asphalt for roads, and molded products like floor mats. Recycled particles are increasingly used in construction for vibration isolation and lightweight aggregates.

Safety and Storage

改性尼龙塑胶粒子 PA6-RNG30 BK104 橡胶轮胎帘子线用 尼龙胶粒66东莞市樟木头宇涛塑胶原料经营部

While rubber particles are generally non-toxic, dust generated during handling may irritate respiratory systems. Use NIOSH-approved dust masks and ensure adequate ventilation in workspaces. Skin contact can cause mild irritation; gloves are recommended. Store particles in sealed containers to prevent moisture absorption and contamination. Keep away from heat sources and oxidizing agents, which may accelerate degradation. Shelf life typically exceeds two years under proper conditions.

商家经验真实案例 · 安全可信
kt33-8可用于水管路吗
本文探讨kt33-8材料是否适合用于水管路,分析其耐水性和耐压性等关键特性,并提供实际应用中的注意事项,帮助您做出合理选择。

B2B Procurement Guide

When sourcing rubber particles, specify particle size distribution (e.g., 20–30 mesh for adhesives) and purity (e.g., free of metal/textile contaminants for coatings). Recycled content percentages (e.g., 80–100% post-consumer) may affect pricing and sustainability certifications. Request technical datasheets for key parameters like Mooney viscosity (for raw rubber) or ash content. Bulk pricing often applies for orders above 1 metric ton. Preferred suppliers include tire recyclers and specialty chemical distributors with ISO 9001 certification.

Related Manufacturers