Overview
Recycled PMA is a reprocessed form of Propylene Glycol Methyl Ether Acetate (PGMEA), a versatile solvent used in industrial applications. It is reclaimed from waste streams or unused batches, then purified to meet specific quality standards. The recycling process reduces environmental impact and costs compared to virgin PMA. Recycled PMA retains the key properties of its virgin counterpart, including high solvency and low toxicity, making it suitable for applications like coatings, inks, and electronics cleaning. However, buyers should ensure it meets required purity levels to avoid performance issues.
Physical and Chemical Properties
Recycled PMA is a colorless to pale yellow liquid with a mild ester-like odor. It has a boiling point of 146-149°C and a density of approximately 0.96 g/cm³ at 20°C. Its low volatility and high solvency make it effective for dissolving resins, oils, and other organic compounds. The solvent is miscible with most organic solvents but only partially soluble in water. Its freezing point is -80°C, allowing use in cold environments. Key differences from virgin PMA may include slight variations in purity or trace contaminants, which should be disclosed by suppliers.
Main Applications
Recycled PMA is widely used in the coatings and inks industry as a carrier solvent for resins and pigments. Its low toxicity and evaporation rate make it ideal for screen printing and flexographic inks. In electronics manufacturing, it serves as a cleaning agent for flux residues and solder pastes. It is also employed in industrial degreasers and specialty cleaners due to its ability to dissolve greases without damaging substrates. Some formulations use it as a co-solvent to enhance the performance of other chemicals.
Safety and Storage
While recycled PMA is less hazardous than many solvents, proper handling is essential. Use gloves and goggles to prevent skin and eye contact, and ensure adequate ventilation to avoid inhalation of vapors. Storage should be in sealed containers away from heat and open flames. Spills should be contained with absorbent materials and disposed of according to local regulations. Suppliers must provide Safety Data Sheets (SDS) detailing any residual contaminants from the recycling process. Regular workplace air monitoring is recommended for prolonged exposure scenarios.
B2B Procurement Guide
When sourcing recycled PMA, prioritize suppliers who provide third-party certifications for purity and contaminant levels. Common industry standards include a minimum purity of 99% and limits on water content or heavy metals. Bulk procurement (e.g., IBC totes or drums) typically offers cost savings. However, sample testing is advisable to confirm consistency. Logistics should account for its flammability (flash point: 47°C) and regulatory requirements for transport. Some suppliers offer take-back programs for further recycling, enhancing sustainability.
Related Manufacturers
- 主营：回收钛白粉、回收硫酸铜、回收氯化亚锡、回收锌粉、回收油漆、回收石蜡、回收己内酰胺、回收水银、回收丙烯酸树脂、回收氧化锌、回收溶剂、回收硫酸亚锡、回收碳酸锂、回收碳酸钾、回收氢氧化锂、回收氢氧化钠、回收氢氧化钾、回收硼酸、回收硼砂、回收煤焦油、回收烧火油、回收环氧树脂、回收过期油漆、回收白砂糖、回收柠檬酸
- 主营：玫瑰精、珠光粉、碳酸锂、炭黑回收、增白剂、聚酯树脂、机硅树脂、环氧树脂、库存颜料、二氧化硅、碱性染料、色淀玫瑰、荧光颜料、分散染料、薄荷脑、日化原料、涂料原料、油墨原料、聚醚MDI
- 主营：回收三氧化二锑
- 主营：回收油漆、回收氯化亚锡、回收氧化锌、回收铜粉、回收白砂糖、回收氧化镨钕、回收钨酸钠、回收钼酸钠、回收石蜡
- 主营：回收镍、回收pe蜡、回收石墨、回收奶粉、回收废油、回收胶粉、回收水银、回收油漆、回收白砂糖、回收硫酸铵、回收氯化石蜡、回收树脂、回收氧化锌、回收硫酸亚锡、回收硫酸铜、回收氯化亚锡、回收钛白粉、回收氯化锂、回收钴酸锂
- 主营：热熔胶、抗氧剂、甘宝素、回收pvc、聚合mdi、330炭黑、高温漆、pom塑料、固化剂、akd蜡粉、原料药、二甲苯、溴化钠、硬脂酸、edta-edta、低密度、促进剂、流平剂、双氰胺、碘化钾、葡萄糖、钨酸钠、阿克苏DCP、无味DCP、异氰酸酯
- 主营：三次元、分析仪、涂抹器、回收、测量箱、光谱分、光栅尺、测量仪、锂电池、水分仪、高度计、计量表、注水仪、磨光机、落地扇、研磨机、取样器、采集器、注塑机、粒度仪、电池板、纯水机、露点仪、无线电、导热仪、点胶机
- 主营：回收过期染料、回收气相白炭黑、回收油漆、回收树脂、回收钛白粉、回收日化原料、回收橡胶原料、塑料助剂、精炼石蜡、化工催化剂
- 主营：回收、激光扫描仪