Overview
Recycled modified resin is a cost-effective and eco-friendly alternative to virgin polymers, produced by reprocessing post-industrial or post-consumer plastic waste with performance-enhancing additives. It addresses sustainability goals while maintaining functional properties for industrial use. Common base materials include polyethylene (PE), polypropylene (PP), and polystyrene (PS), often blended with fillers, stabilizers, or compatibilizers to tailor properties. The modification process may involve mechanical, chemical, or thermal treatments to achieve desired characteristics such as impact resistance or UV stability.
Physical and Chemical Properties
The properties of recycled modified resin depend heavily on its source material and additives. Typical enhancements include increased tensile strength (20–50% improvement over non-modified recycled resin) and better heat resistance. Density ranges from 0.9 g/cm³ for lightweight foams to 1.4 g/cm³ for mineral-filled compounds. Chemically, these resins exhibit similar inertness to their virgin counterparts but may have reduced purity due to contaminants. Compatibility with other materials (e.g., adhesives or coatings) should be tested case-by-case, as additives can alter surface energy.
Main Applications
In the automotive sector, recycled modified resins are used for non-structural components like dashboards, door panels, and under-the-hood parts, where weight reduction and cost savings are critical. Construction applications include pipes, insulation boards, and composite wood alternatives. The packaging industry utilizes these resins for rigid containers, pallets, and films, often meeting FDA or EU food-contact standards after thorough testing. Consumer goods like furniture, toys, and electronics housings also benefit from the material’s balance of sustainability and performance.
Safety and Storage
While recycled modified resins are generally safe to handle, processing at high temperatures may release volatile organic compounds (VOCs) or residual monomers. Adequate ventilation and personal protective equipment (PPE) such as respirators are recommended during manufacturing. Storage requires protection from moisture absorption, which can degrade quality. Use sealed containers in environments below 30°C. UV-sensitive formulations should be stored in opaque packaging to prevent premature degradation.
B2B Procurement Guide
When sourcing recycled modified resin, prioritize suppliers with transparent material traceability and third-party certifications like UL Ecologo or Global Recycled Standard. Request technical datasheets detailing mechanical properties, additive composition, and batch-to-batch consistency. For large orders, negotiate pricing tiers based on volume (e.g., discounts for 10+ metric tons). Sample testing is critical to verify compatibility with your production equipment—common issues include inconsistent melt flow index or excessive filler content causing abrasion in extruders.
Related Manufacturers
- 主营：回收磷酸、回收废盐、回收工业盐、回收混合盐、处置副产工业盐
- 主营：PA6、PA66、PBT、PC、POM、PC/ABS、科思创、美国杜邦、日本宝理、日本东丽、日本旭化成
- 主营：松香树脂、回收颜料、回收化工原料、化工助剂溶剂
- 主营：回收羟丙基甲基纤维素、回收颜料色粉、回收合成橡胶、回收PVA聚乙烯醇、回收洗涤剂原料、回收MDI、回收聚醚多元醇、回收环氧树脂、回收聚氯乙烯糊树脂、回收酚醛树脂、回收橡胶色胶、氧化锌回收、油漆回收、收购受潮钛白粉
- 主营：回收油漆、回收树脂、回收橡胶助剂、回收油漆厂原料、回收橡胶、回收香精、回收热熔胶
- 主营：回收钛白粉、回收硫酸铜、回收氯化亚锡、回收锌粉、回收油漆、回收石蜡、回收己内酰胺、回收水银、回收丙烯酸树脂、回收氧化锌、回收溶剂、回收硫酸亚锡、回收碳酸锂、回收碳酸钾、回收氢氧化锂、回收氢氧化钠、回收氢氧化钾、回收硼酸、回收硼砂、回收煤焦油、回收烧火油、回收环氧树脂、回收过期油漆、回收白砂糖、回收柠檬酸
- 主营：回收三氧化二锑
- 主营：回收油漆、回收氯化亚锡、回收氧化锌、回收铜粉、回收白砂糖、回收氧化镨钕、回收钨酸钠、回收钼酸钠、回收石蜡
- 主营：玫瑰精、珠光粉、碳酸锂、聚酯树脂、机硅树脂、环氧树脂、炭黑回收、增白剂、库存颜料、二氧化硅、碱性染料、色淀玫瑰、荧光颜料、分散染料、薄荷脑、日化原料、涂料原料、油墨原料、聚醚MDI
- 主营：染料回收、回收颜料
- 主营：回收颜料、回收白凡士林、回收日化原料、回收聚氨酯原料、回收聚醚多元醇
- 主营：塑料颗粒、尼龙、POM、ABS、PA66、PA6、PC、PBT、EVA、HDPE、日本宝理、美国杜邦、日本东丽、德国巴斯夫、台湾奇美、台湾台塑
- 主营：回收聚醚多元醇、回收热熔胶、回收石蜡、回收香精、回收化工原料、回收日化原料、回收化妆品原料、回收塑料助剂、回收过期油墨、回收过期油漆、回收胶印油墨、回收树脂、回收聚氨酯黑白料、回收异氰酸酯、回收MDI、回收三氧化二锑、回收氧化锌、回收抗氧剂、回收钛白粉、回收船舶油漆、回收防污漆、回收荧光增白剂、回收二甲基硅油、回收二甲基亚砜、回收硫酸亚锡
- 主营：回收过期染料、回收气相白炭黑、回收油漆、回收树脂、回收钛白粉、回收日化原料、回收橡胶原料、塑料助剂、精炼石蜡、化工催化剂
- 主营：尼龙66pa66、PA6、HTN、PET、PBT、PA6T、透明尼龙