Overview
PVDC emulsion is a colloidal dispersion of polyvinylidene chloride polymer particles in water, stabilized by surfactants. Developed in the 1930s, it revolutionized packaging by providing unprecedented barrier performance. As a coating material, it combines the processability of water-based systems with the exceptional barrier properties of PVDC. The emulsion form allows easy application at high speeds on paper, plastic films, and other substrates without requiring organic solvents.
Physical and Chemical Properties
PVDC emulsions typically contain 40-60% solids by weight, with particle sizes ranging from 50-300 nm. The polymer's crystalline structure provides outstanding barrier properties, with oxygen transmission rates as low as 0.1-5 cc/m²/day/atm. Key characteristics include excellent resistance to oils, greases, and most chemicals except strong bases. When dried, films exhibit high tensile strength (30-50 MPa) and moderate flexibility (100-300% elongation). The emulsion pH is usually maintained between 2-4 for stability.
Main Applications
Approximately 70% of PVDC emulsions are used in food packaging, particularly for snack foods, cheese, and meat products where extended shelf life is critical. Multi-layer structures often combine PVDC with PET or PP films. In pharmaceuticals, the material protects moisture-sensitive drugs in blister packs. Industrial applications include agricultural chemical packaging and electronic component protection. Some specialty grades are formulated for heat-sealable coatings or as adhesive layers in laminate structures.
Safety and Storage
While PVDC emulsions are generally safe to handle at room temperature, decomposition above 180°C can release hydrogen chloride gas. Facilities should have adequate ventilation and avoid contact with strong alkalis. Proper storage requires maintaining temperatures above 5°C to prevent freezing damage and below 30°C to avoid accelerated aging. Unopened containers typically have a 6-12 month shelf life. Agitation before use is recommended to ensure uniform dispersion.
B2B Procurement Guide
Industrial buyers should specify technical parameters including solids content (affects coating weight), viscosity (impacts application method), and minimum film formation temperature (MFFT). For packaging applications, verify compliance with FDA 21 CFR or EU 10/2011 food contact regulations. Sample testing should evaluate barrier performance under actual use conditions (temperature/humidity). Large-volume purchasers may negotiate annual contracts with tiered pricing, typically requiring MOQs of 5-20 metric tons.
Related Manufacturers
- 主营：GF增强POM、工程料PPA、陶氏热熔胶、PVDC阻隔乳液、杜邦PTFE乳液、铁氟龙乳液、透明尼龙、增韧剂POM、耐磨 PTFE细粉、电绝缘TPV、杜邦超韧尼龙、无卤阻燃尼龙、注塑级POM、分散液PTFE、陶氏沙林树脂、抗UVPOM、EEA热熔胶、耐寒尼龙ST801、耐刮花PC、热塑性弹性体TPV、陶氏增韧剂、金属粘合剂、马来酸酐接枝、尼龙pa66、导电PC塑料
- 主营：聚丙烯PP、聚甲醛POM、聚碳酸酯PC、乳液PVDC、ABS、PC/ABS、PA6、PA66、EVA、PCTG、PVDF、POE、塑胶颗粒、工程塑料、TPU、中石化、台塑、旭化成、杜邦、宝理、韩国LG、PMMA、PA12、燕山石化
- 主营：PET粉、液体顺丁橡胶、羧基丁腈橡胶、常温固化PVDC乳液、TPU粉、塑胶原料、EAA粉、环保降解塑料、特殊工程塑料、各种塑胶粉料、各种液体橡胶
- 主营：镜头料、喷涂粉、聚酰胺、聚偏二氯乙烯乳液、摄像头、工程塑料、汽车齿轮、薄壁部件、镜头镜片、绝缘材料、电子电器、飞机零件、电线电缆、喷涂涂层、流延薄膜、电气元件、线材板材、光学镜头、汽车部件、薄壁制品、镜头专用料、汽车电子部件、电动工具配件、高抗冲纯树脂、照明灯具原料、精密仪器零部件
- 主营：工程塑胶原料、通用塑胶原料、合金塑胶原料
- 主营：塑胶原料、poe、pp、pc、pom、pc/abs、eva、abs、pvdf、tpu、tpe、tpee、pps、sk、陶氏、三井、PA6、PA66、PA46
- 主营：PP聚丙烯、PE聚乙烯、PTFE聚四氟乙烯、PVDC乳液、PVDF聚偏氟乙烯
- 主营：超细聚酰亚胺树脂粉、热固性聚酰亚胺树脂粉、热塑性聚酰亚胺树脂粉、聚偏二氯乙烯乳液、可溶性热固性聚酰亚胺树脂粉、可溶性热塑性PI粉、PI树脂液、PTFE粉末、PVDF粉末、特种工程塑料
- 主营：毕克BYK、海名斯德谦、埃夫卡EFKA、PVDC乳液、迪高Tego、路博润、共荣社、科莱恩、帝斯巴隆、尚高Sago、沃克尔VOK、巴斯夫科宁、信越、高泰、阿克苏诺贝尔、诺力昂、亚什兰、埃斯特伦、美国气体化学、迈图、Borchers、道康宁、陶熙、陶氏、罗门哈斯
- 主营：无纺布、滑石粉、特氟龙、pvdc、耐溶剂、粘合剂、热熔胶、共聚物、耐酸碱、相容剂、超细粉、氟乙烯、锂电池、299涂料、活塞环、细微粉、聚丙烯、喷涂粉、玻璃珠、润滑油、sma树脂、粘接剂、蒸煮袋、润滑剂、铝塑膜、增稠剂
- 主营：ABS、TPU、PVDF、PTFE、PPS、EVA、PA66、PA12、PBT、POM、PPSU、LCP、PA46、PA6、PC、PPO、PPE、PVDC
- 主营：丁腈橡胶、PP、通用塑料、液体橡胶、粉末橡胶、降解塑料