Overview
Plastic-Lined PTFE-Lined Jet Pumps are engineered for demanding industrial applications where standard pumps fail due to corrosion or abrasion. These pumps combine the structural strength of metal casings with the chemical resistance of polymer linings, offering extended service life in aggressive environments. Jet pumps operate on the venturi principle, using a high-velocity motive fluid to create suction. The lining materials (typically polypropylene, PVC, or PTFE) protect the pump's interior from chemical attack while maintaining smooth fluid flow with minimal friction loss.
Structure and Working Principle
The pump consists of three main components: a nozzle (creates high-velocity jet), a suction chamber (draws in fluid), and a diffuser (converts velocity back to pressure). The metal housing provides structural support, while the bonded lining shields all wetted parts from corrosive media. When pressurized motive fluid passes through the nozzle, it creates a vacuum that draws suction fluid into the mixing chamber. The mixed fluids then exit through the diffuser. This design requires no moving parts in contact with process fluids, reducing maintenance needs.
Key Features
Superior chemical resistance is the hallmark of these pumps, with PTFE offering the broadest compatibility (resistant to virtually all acids, bases, and solvents). Plastic linings like PP or PVC provide cost-effective solutions for less aggressive media. Other features include cavitation resistance due to smooth lining surfaces, customizable port configurations for piping integration, and the ability to handle fluids with suspended solids (depending on lining thickness). Most models operate at pressures up to 16 bar and temperatures from -20°C to 120°C, with PTFE versions reaching 150°C.
Application Areas
These pumps excel in chemical processing for transferring acids (e.g., sulfuric, hydrochloric), alkalis, and organic solvents. They're commonly used in pickling lines, electroplating facilities, and pharmaceutical production where purity is critical. In environmental applications, they handle abrasive slurries in wastewater treatment and flue gas desulfurization systems. The oil/gas industry employs them for produced water injection and chemical dosing. Food-grade versions with FDA-compliant linings serve in hygienic processing.
Maintenance and Precautions
Regular inspection of lining integrity is crucial – look for cracks, blistering, or detachment. Use ultrasonic thickness gauges for PTFE linings. Always maintain adequate flow rates to prevent solids deposition that could damage linings. Avoid thermal shocks (sudden temperature changes exceeding 50°C) that may cause lining delamination. For maintenance, only use soft tools when cleaning to prevent scratching. Always verify gasket material compatibility during reassembly.
B2B Procurement Guide
When sourcing these pumps, specify: 1) Exact fluid composition (including % concentration and temperature), 2) Required flow rate and suction lift, 3) Connection standards (DIN, ANSI, etc.), and 4) Any certification needs (ATEX, FDA, etc.). Leading manufacturers typically offer 18-24 month warranties on linings. Consider total cost of ownership – while PTFE-lined pumps cost 2-3× more than plastic-lined versions, their longer lifespan often justifies the investment for harsh applications. Always request material test reports for linings.
Related Manufacturers
- 主营：真空泵、酸碱喷射器、玻璃钢喷射器、不锈钢喷射器
- 主营：挖掘机、链轮组件、飞臂吊、喷射器、拆缸机、锯齿环、伸缩臂、皮带硫化机、聚能管、临时支护装置、搬运悬浮气垫、搬运坦克车、矿用三轮车、船用风机、钻头、速凝剂、钻杆、电液推杆、洗靴机、手拉葫芦、除铁器、管道排渣器、消毒门、静电释放器、定向钻机
- 主营：喷射器、喷射泵、真空泵、脱硫喷射器、水喷射真空泵机组、酸碱喷射器、喷射泵总成、射流器
- 主营：高位翻车机、烘靴机、洗靴机、注浆泵、喷射器、喷浆机、给煤机、除铁器、回柱绞车、张紧绞车、电动滚筒、纠偏装置、螺旋千斤顶、手拉葫芦、轴流风机、螺纹钢锚杆、电动坦克、高压清洗机、锚杆钻机、聚能管、硫化机、平板车、锚索搅拌器、搬运气垫、气浮搬运车
- 主营：防水密闭门、无压风门、单体液压支柱、隔膜泵、油枕木、刮板机配件、双速绞车、耙斗装岩机、风筒、压风自救装置、圆环链、金属顶梁、电机车、调度绞车、尼龙柱鞋、液力耦合器、托辊、翻斗式矿车、回柱绞车、风门、耙矿绞车、气动葫芦、隔爆水袋、给煤机