Overview
The PS2581L1 is a phototransistor output optocoupler designed for industrial signal isolation applications. As part of the optoelectronics component family, it provides galvanic isolation between input and output circuits while enabling signal transmission through light coupling. Commonly packaged in a 4-pin DIP (Dual In-line Package), this device features an infrared LED optically coupled to a phototransistor. It serves as a crucial component in power electronics, PLC systems, and measurement equipment where electrical isolation is required.
Structure and Working Principle
The PS2581L1 consists of two main components: an input-side GaAs infrared LED and an output-side silicon phototransistor, separated by an optically transparent but electrically insulating barrier. When current flows through the LED, it emits infrared light that activates the phototransistor. This light-based coupling mechanism achieves up to 5kV isolation voltage between input and output. The device operates in saturation mode for digital signal transmission or linear mode for analog applications, with typical current transfer ratios (CTR) ranging from 50-600% depending on operating conditions.
Key Features
The PS2581L1 offers several notable technical characteristics. Its compact DIP-4 package allows for easy PCB mounting while maintaining 5kV AC/1 minute isolation capability. The device features a typical rise/fall time of 4μs, making it suitable for moderate-speed switching applications. Additional features include wide operating temperature range (-55°C to +110°C), high collector-emitter voltage (VCEO) of 80V, and low CTR degradation over time. These specifications make it particularly suitable for harsh industrial environments where reliability is critical.
Application Areas
Primary applications include industrial automation interfaces, power supply feedback circuits, and measurement equipment isolation. The PS2581L1 is commonly found in PLC input/output modules, where it isolates sensitive control circuitry from high-voltage field devices. Other uses include motor drive circuits, medical equipment isolation barriers, and communication interface protection. Its ability to prevent ground loops and suppress electromagnetic interference makes it valuable in noise-sensitive electronic systems across multiple industries.
Maintenance and Precautions
Proper handling extends the PS2581L1's operational life. Avoid exposing the device to direct sunlight before installation, as UV radiation can affect the optical components. During soldering, maintain temperature below 260°C and limit duration to prevent package damage. Storage should be in anti-static packaging at temperatures between -40°C to +85°C with relative humidity below 70%. In circuit design, ensure forward current through the LED does not exceed 60mA (typically operated at 10-20mA) to prevent premature degradation.
B2B Procurement Guide
When sourcing PS2581L1 optocouplers, verify manufacturer certifications (UL, CSA, VDE) for your target markets. Reputable distributors typically offer bulk pricing tiers starting at 1,000-piece quantities, with lead times varying from stock availability to 8-12 weeks for custom orders. Quality indicators include consistent CTR batch-to-batch variation below ±15% and proper moisture sensitivity level (MSL) labeling. Consider requesting samples for CTR and response time verification before large purchases. Alternative equivalent parts may include PC817 or TLP521 series, but always check datasheet compatibility.
Related Manufacturers
- 主营：2.0-3.0mh、48mhz64kb、rtl8211dn、tps51275c、5.5v10.8v、a83asot23、opa2227pa、放大器、sh93p426f、5177984-6、opa2131ua、tb6560ahq、tb135xqfn、稳压器、1376357-8、tda12067h、dl-115bga、调节器、c14100kjl、rda8851ml、ad7541akn、变压器、控制器、lt1054cn8、连接器