Overview
PS Brightener is a specialized additive designed to improve the optical properties of polystyrene (PS) products. It works by modifying the polymer's surface characteristics during processing, resulting in enhanced light reflection and reduced surface imperfections. These additives are particularly valuable in applications where visual appeal is critical, such as food packaging, cosmetic containers, and retail displays. They are typically compounded with PS resin prior to injection molding, extrusion, or thermoforming processes.
Physical and Chemical Properties
PS Brighteners are formulated to be thermally stable at typical PS processing temperatures (180-240°C). Their chemical composition is designed to migrate slightly to the polymer surface during cooling, creating a smooth, reflective layer. The effectiveness of these additives depends on their compatibility with the base polymer and the processing conditions. Optimal results are achieved when the brightener is evenly dispersed throughout the PS matrix, typically at loading levels of 0.5-2.0% by weight.
Main Applications
Primary applications include disposable food service items (plates, cups, cutlery) where enhanced clarity competes with transparent PET alternatives. In packaging, brightened PS is used for clamshell containers, blister packs, and cosmetic cases requiring premium appearance. Specialty uses include point-of-purchase displays and optical components where controlled light transmission is required. Some formulations also improve the printability of PS surfaces for graphic applications.
Safety and Storage
Most commercial PS brighteners are non-toxic and comply with food contact regulations when used appropriately. However, material safety data sheets (MSDS) should always be consulted for specific formulations. Storage requires protection from moisture absorption, which can affect processing performance. Bulk quantities should be kept in sealed containers away from direct sunlight. Shelf life typically exceeds 12 months when stored properly.
B2B Procurement Guide
Industrial buyers should specify the target PS grade (GPPS or HIPS) and processing method when sourcing brighteners. Technical specifications should include gloss measurement standards (typically 60° gloss meter) and any regulatory certifications required. Sample testing is recommended before large purchases, as effectiveness varies with polymer molecular weight and additives. Leading manufacturers often provide application support to optimize dosage and processing parameters for specific equipment.
Related Manufacturers
- 主营：氧化铁颜料、铁粉、膨润土、增光剂、珍珠岩、矿物纤维、木质纤维、硅酸铝纤维、海泡石纤维、云母粉
- 主营：工业级白油、食品级白油、食品酒精、增光剂、无水乙醇、白凡士林、三乙醇胺、溶剂油、P507萃取剂、二甲基丙烯酰胺、正十二烷、8-羟基喹啉、阻聚剂701、聚乙二醇、三乙二醇、桐油、1227杀菌剂、乙醇钠、乙酸乙酯、二甲苯
- 主营：有机颜料、无机颜料、金属络合染料、增光剂、溶剂染料、纳米颜料、荧光染料、炭黑、增白剂、助剂、氧化铁颜料、水溶性染料、荧光颜料、色母粒、钛白粉、硫酸钡
- 主营：颗粒料、塑料颗粒、纯树脂、PP塑料增光剂、尼龙单6、索尔维c、高透明pc、中粘度pc、聚碳酸酯、塑胶颗粒、尼龙树脂、热稳定剂、塑料材料、塑胶制品
- 主营：pp阻燃母粒、pe开口母粒、塑料增亮剂、塑胶增光剂、塑料增光剂、橡胶增光剂、塑料防雾剂、防雾滴母料、防静电母粒、增光增亮剂、pe薄膜阻燃剂、塑料除味剂、抗静电母粒、塑料开口母料、PP降温母粒、气相防锈母粒、塑料润滑光亮剂、塑料防锈母粒、增韧母料、防老化母料、爽滑开口母粒、pe阻燃母粒、abs阻燃母粒、聚丙烯降温母粒
- 主营：有机颜料、无机颜料、金属络合染料、增光剂、溶剂染料
- 主营：离子液体、阻燃剂、咪唑、增光剂、催化剂、乙酰丙酮钴、正丁醇锆、四氟硼酸锂、香兰基丁醚、氟化物、全氟辛基三甲氧基硅烷、丙酮肟、双酚E型氰酸酯、叔丁基乙烯基醚、钯碳催化剂、钛硅分子筛、硫酸烟酰苯胺、丙酮缩氨基硫脲
- 主营：表面施胶剂、苯丙表胶、乳液施胶剂、增光剂、中性施胶剂、浆内施胶剂、AKD施胶剂、高分子乳化剂、固体表面施胶剂、纸塑模具防水剂、蜡粉、烷基烯酮二聚体、蜡乳液、松香胶、湿强剂、湿强解离剂、抗掉毛掉粉剂、纤维增强剂、干强剂、抗水剂、挺硬剂、拉力增强剂、增白剂、涂布润滑剂、涂布分散剂、丁苯胶乳
- 主营：脱模剂、碘酸钾、磷酸镁、增光剂、维生素c、维生素b1、维生素b6、维生素d3、二硫化钼、吡啶硫铜、香草香精、芥酸酰胺、乙基纤维素、次氯酸钙、九水硫化钠、EVA乳液、水玻璃、硅酸钠
- 主营：增光剂、福美钠
- 主营：硫酸钡、碳酸钙、硅溶胶、增光剂、苄基胂酸、甲基磺酸、氨基磺酸、正硅酸乙酯、多聚甲醛
- 主营：封口蜡、水杨酸、正辛烷、增光剂、肉桂醇、珠光片、碳酸镁、肉桂醛、建筑料、磷酸铝、肉桂酸、戊二醛、切削液、叔丁醇、清洗剂、硫化钠、硫化钡、升硫醚、硫化钙、杀菌液、氯化锌、黄原胶、助染剂、椰子油、氯化锰、氧化锑
- 主营：增光剂、化工
- 主营：阻燃剂、催化剂、水杨酸、用作橡胶表面增光剂、二苯基、酰亚胺、正磷酸、烟酰胺、曲酸粉、氯化锌、异丙醇、化妆品、初油酸、脂肪醇、生石灰、甲基异、碳酸锌、碳酸锂、活性炭、乙二胺、三氮唑、着色剂、环己酮、防冻液、抗氧剂、亚磷酸
- 主营：镭雕粉、镭雕母粒、镭雕助剂、造粒pe增光剂、阻燃剂、阻燃母粒、抗滴落剂、增韧剂、润滑剂、相容剂、成核剂、抗氧化剂、磷酸酯类阻燃剂、开口爽滑剂、紫外线吸收剂