Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

Propyltriethoxysilane

Updated: 2026-08-07

Overview

3-Glycidyloxypropyltriethoxysilane (GPTES) is a bifunctional organosilane widely used as a coupling agent in industrial applications. Its molecular structure combines an epoxy group and triethoxysilane, enabling covalent bonding between organic polymers and inorganic substrates. Developed in the mid-20th century, GPTES became a cornerstone in composite material technology due to its ability to enhance interfacial adhesion. As a colorless to slightly yellow liquid, GPTES is commercially available in purified grades (typically ≥98%). It is classified as a reactive intermediate, requiring careful handling to prevent premature hydrolysis. Major producers include Dow Chemical, Momentive, and Evonik, supplying global markets in bulk quantities.

Physical and Chemical Properties

生产厂家 3-异氰酸酯基丙基三乙氧基硅烷 硅烷偶联剂 CAS 24801-88-5山东沅锦新材料有限公司

GPTES exhibits a density of 1.07 g/cm³ and boils at 120°C under reduced pressure (1 mmHg). Its epoxy ring (oxirane) provides organic reactivity, while the ethoxy groups (-OCH2CH3) hydrolyze to form silanol (Si-OH) bonds with inorganic surfaces. This dual functionality allows GPTES to bridge materials like glass, metals, and polymers. The compound undergoes hydrolysis in the presence of moisture, releasing ethanol. Storage under dry nitrogen is recommended to prevent polymerization. In solutions, GPTES forms hydrogen bonds with polar solvents like ethanol but reacts exothermically with water. Its refractive index (1.427 at 20°C) and viscosity (~4 cP) make it suitable for coating applications.

商家经验真实案例 · 安全可信
羧酸酯是脂基吗
本文解析羧酸酯与脂基的化学结构差异,通过生动类比说明二者的关系,并列举常见工业应用场景,帮助读者清晰区分两类化合物。

Main Applications

In coatings and adhesives, GPTES improves wet adhesion to glass and metals, especially in automotive primers and aerospace composites. It chemically bonds to metal oxides (e.g., aluminum, steel) while crosslinking with epoxy resins, enhancing corrosion resistance. The silane is also used in fiberglass sizing, where it increases the mechanical strength of glass-reinforced plastics by up to 40%. Electronics manufacturers utilize GPTES as a dielectric layer modifier in microchips and as an encapsulant for LEDs. In mineral-filled composites (e.g., talc, silica), it reduces filler agglomeration and improves dispersion. Emerging applications include surface modification of nanoparticles for drug delivery systems and as a crosslinker in silicone hybrids.

Safety and Storage

轩浩新材料 3-硫氰基丙基三乙氧基硅烷偶联剂 XH-264巯基硅 烷南京轩浩新材料科技有限公司

GPTES is classified as flammable (Flash point: 96°C) and a skin/eye irritant under GHS. Proper PPE (gloves, goggles) and fume hoods are mandatory during handling. Spills should be contained with absorbent materials like vermiculite and disposed of as hazardous waste. Storage requires airtight containers (preferably stainless steel or HDPE) under nitrogen blanket to prevent moisture absorption. Shelf life is typically 12 months when stored below 25°C. Incompatible materials include strong acids/bases and oxidizers. Firefighting measures recommend dry chemical powder or CO2 extinguishers—avoid water jets due to reactivity.

商家经验真实案例 · 安全可信
贴片51电阻值解密
本文解析贴片电阻标注为'51'时的实际阻值,解释三位数标注规则的计算方法,并说明如何快速识别常见贴片电阻规格,帮助读者掌握电子元件选型技巧。

B2B Procurement Guide

Industrial buyers should specify technical parameters: purity (≥98%), residual chloride content (<50 ppm), and water content (<0.5%). Bulk purchases (drum/tote) commonly offer 10-15% cost savings versus small packaging. Key suppliers include Gelest (US), Shin-Etsu (Japan), and WD Silicone (China). Logistics require UN-certified packaging (UN1993) for flammable liquids. Sample testing should verify hydrolysis stability and epoxy equivalent weight (EEW). For customized formulations, some suppliers provide pre-hydrolyzed or solvent-diluted versions. MOQs for specialty grades start at 25 kg, with lead times of 2-4 weeks for tailored products.

Related Manufacturers