Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

Precision Programmable Voltage Reference

Updated: 2026-07-25

Overview

The CJ431 is a precision voltage reference diode commonly used in electronic circuits for its stability and adjustability. It functions as a shunt regulator, providing a fixed or adjustable reference voltage. The device is widely utilized in power supplies, battery chargers, and other applications requiring precise voltage control. Its three-terminal design allows for easy integration into various circuit configurations. The CJ431 is known for its low dynamic impedance and high accuracy, making it a reliable choice for engineers and designers. It is often compared to the TL431, a similar device with comparable specifications. The CJ431 is available in various packages, including TO-92 and SOT-23, catering to different design requirements.

Physical and Chemical Properties

JCET长电 CJ431K 0.5% 丝印431K 100mA 36V SOT-23 电压基准芯片国丰临科技(深圳)有限公司

The CJ431 is a semiconductor device with no significant chemical properties relevant to its operation. Its physical properties include a small form factor and three terminals: anode, cathode, and reference. The device operates within a specified temperature range, typically -40°C to 85°C, ensuring reliability in various environments. The CJ431's electrical properties are its defining characteristics. It offers a reference voltage that can be adjusted using external resistors, typically ranging from 2.5V to 36V. The device has low dynamic impedance, ensuring stable performance under varying load conditions. These properties make it suitable for precision applications where voltage stability is critical.

商家经验真实案例 · 安全可信
易泰龙属于什么档次
本文解析易泰龙在行业中的定位档次,从其产品特性、应用场景及市场反馈三个维度进行客观分析,帮助读者全面了解该品牌的实际水平。

Main Applications

The CJ431 is extensively used in power supply circuits, where it provides a stable reference voltage for regulation. It is commonly found in switch-mode power supplies (SMPS), linear regulators, and battery chargers. The device's adjustability allows designers to set the desired output voltage, making it versatile for various applications. In addition to power supplies, the CJ431 is used in voltage monitoring circuits, precision current sources, and analog signal processing. Its ability to maintain a stable reference voltage under varying conditions makes it ideal for applications requiring high accuracy. The device is also used in automotive electronics, industrial control systems, and consumer electronics.

Safety and Storage

CJ431A 集成电路(IC) SOT23-3 功能 兼容性好 工作温度深圳市华本天成电子有限公司

The CJ431 is a sensitive semiconductor device and should be handled with care to prevent damage from electrostatic discharge (ESD). Proper ESD precautions, such as using grounded wrist straps and anti-static mats, are recommended during handling and installation. The device should be stored in a dry, cool environment, away from moisture and static electricity. When soldering the CJ431, it is important to follow the manufacturer's recommended temperature profiles to avoid thermal damage. Excessive heat can degrade the device's performance or cause permanent failure. Proper storage and handling ensure the device's longevity and reliability in its intended applications.

商家经验真实案例 · 安全可信
快速充电和超快充电区别
本文详细解析快速充电与超快充电的区别,包括充电原理、实际应用场景及对设备的影响,帮助你根据需求选择合适的充电方式。

B2B Procurement Guide

When procuring CJ431 devices in bulk, it is essential to verify the specifications with the supplier to ensure they meet the required standards. Key parameters to check include the reference voltage, tolerance, and temperature range. Purchasing from reputable suppliers reduces the risk of receiving counterfeit or substandard components. Price negotiations should consider the order quantity, with larger orders typically benefiting from volume discounts. It is also advisable to request samples for testing before committing to a large purchase. Lead times and minimum order quantities (MOQs) vary by supplier, so these factors should be clarified early in the procurement process.

Related Manufacturers