Overview
The PPG series encompasses polypropylene glycols of varying molecular weights, synthesized via polymerization of propylene oxide. These polymers are foundational in polyurethane systems due to their terminal hydroxyl groups, which enable controlled reactivity with isocyanates. Industrial grades are classified by molecular weight (e.g., PPG-400, PPG-2000), influencing viscosity and functionality. Their non-ionic nature and water solubility make them indispensable in formulations requiring hydrophilicity and chemical stability.
Physical and Chemical Properties
PPG compounds exhibit Newtonian fluid behavior with viscosities ranging from 50–5000 mPa·s (25°C), directly correlating to chain length. Their freezing points decrease with increasing molecular weight, remaining pourable at subzero temperatures. Chemically, PPG resists hydrolysis and oxidation better than polyethylene glycol (PEG). The ether backbone provides flexibility, while terminal hydroxyls allow derivatization. pH-neutral (6–8 in 5% aqueous solution), they demonstrate excellent compatibility with acids, bases, and salts.
Main Applications
Over 60% of PPG production supplies flexible polyurethane foams for furniture and automotive seating. Lower MW variants (400–1000) act as lubricants in metalworking fluids, while higher MW grades (2000–4000) serve as base polymers for adhesives and sealants. In personal care, PPG-12/SMDI copolymer functions as a film-forming agent. Niche uses include de-icing fluids (aviation) and as inert carriers for agrochemicals. Emerging applications encompass 3D printing resins and biodegradable plasticizers.
Safety and Storage
PPG series products are classified as non-hazardous under OSHA standards, with LD50 >5,000 mg/kg (oral, rat). No significant vapor pressure eliminates inhalation risks at ambient temperatures, though mechanical ventilation is recommended for heated processes. Storage in epoxy-lined or stainless steel containers prevents contamination. Bulk tanks should include nitrogen blanketing to prevent moisture absorption. Shelf life exceeds 24 months when stored below 40°C with desiccants.
B2B Procurement Guide
Industrial buyers should prioritize suppliers with ISO 9001-certified production facilities, requesting Certificates of Analysis for hydroxyl value (typically 56–280 mg KOH/g) and water content (<0.1%). Tank truck deliveries (20–25 MT) offer 10–15% cost savings versus drum shipments. Just-in-time procurement is viable due to stable raw material (propylene oxide) markets. Key evaluation metrics include batch-to-batch consistency and technical support for formulation troubleshooting.
Related Manufacturers
- 主营：聚氨酯面漆、环氧富锌底漆、环氧漆、防火涂料
- 主营：异丙醇、冰醋酸、化工原料、正庚烷、甲基环己烷、乙二醇、苯酚、江苏异丙醇、江苏化工原料、工业吡啶、工业苯酚、正丁醇、MIBK、无水乙醇、正己烷
- 主营：聚乙二醇、聚丙二醇、叔胺、伯胺、染料中间体
- 主营：乙二醇、二甲基亚砜、丙二醇、精对苯二甲酸、己二酸、聚乙烯醇、聚乙二醇、木质素、甘油、三甘醇、己内酰胺、叔十二硫醇、白油、对苯二甲酸二甲酯、4-丁二醇
- 主营：固化剂、聚合mdi、喷涂料、清洗剂、硫化剂、己二酸、增塑剂、巴斯夫、管道料、聚氨酯、拼板胶、二辛酯、莫卡硫化剂、聚氨酯组合料、聚醚多元醇、聚氨酯黑料、异氰酸酯
- 主营：食品添加剂、吊白块吊白粉、硅酸盐、五氧化二钒、工业食品级片碱、污水处理剂、消毒剂、重金属捕捉剂、英轩柠檬酸系列、各种品牌葡萄糖、肥料、表面活性剂、过碳酸钠、磷酸盐、硫酸盐、化工原料
- 主营：食品添加剂、防冻剂乙二醇丙二醇、洗涤原料、电镀原料、污水处理剂、消毒剂、工业印染保险粉、五氧化二钒、过硫酸盐、工业级食品级片碱粒碱、英轩柠檬酸系列、葡萄糖、重金属捕捉剂、肥料、表面活性剂、过碳酸钠、净水药剂、大苏打、电镀催化剂、磷酸盐、硫酸盐
- 主营：食品添加剂、工业印染助剂保险粉、雕白块吊白粉、五氧化二钒、工业及食品及片碱粒碱、电镀原料、污水处理剂、消毒剂、洗涤原料、英轩柠檬酸系列、葡萄糖、重金属捕捉剂、石油助剂、水溶农用肥料、表面活性剂、过碳酸钠、电镀催化剂
- 主营：日本三井甲基丙烯酰胺、十二烷基苯磺酸钠、LAS-90、ppg1000、磺酸钠P-90、2A1、医药级丙二醇、50HB-400、聚醚胺D230、DMP-30、PA-25、445N、散可利CP-5、AMP-95、三洋PEG20000、聚醚胺D2000、亨斯迈D400、50HB260、50HB-660、精炼椰子油、杰克EDTA酸、马石油三乙醇胺、DTPA-5Na、卡波姆U21、3225晶振、巴斯夫CO-40
- 主营：防冻液、冰醋酸、乙二醇、冰乙酸、纯吡啶、丙二醇、羟基苯、14丁二醇、3-丙三醇、四氢呋喃、环保乙腈、化工苯酚、1.4丁二醇、医用苯酚、工业苯酚、精制苯酚、价位四氢、乙腈工业、乙酸乙酯、吡啶化工、甲酸乙酯、吡啶工业、求购苯酚、高纯三氯、实验乙腈
- 主营：乳化剂、聚乙二醇、聚丙二醇、渗透剂、司盘、吐温、匀染剂O-25、平平加、脂肪胺聚氧乙烯醚、磷酸酯、丙二醇嵌段聚醚、快速渗透剂OT、乳化剂AEO、烷基酚聚氧乙烯醚、聚乙二醇脂肪酸酯、抗静电剂、消泡剂
- 主营：乙酸龙脑酯、聚苯乙烯磺酸钠、乙基黄原酸钾、2-十一酮
- 主营：苯甲醇、乙二醇、苯甲酸、异丙醇、乙萘酚、一异丙醇胺、苯酚、PTA、DMT、DMF、三乙醇胺、乙二醇单丁醚、对羟基苯甲醚、甲基丙二醇、二甘醇胺、双酚A、DBP
- 主营：ppg电泳漆、液体漆、防腐涂料
- 主营：分散剂、润湿剂