Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

Polypropylene Grade 1 Pipe

Updated: 2026-07-29

Overview

Polypropylene Homopolymer (PP-H) Pipes are thermoplastic piping systems manufactured from propylene monomers through extrusion processes. As a Type 1 polypropylene material, they exhibit superior stiffness and temperature resistance compared to copolymer variants (PP-R/PP-B). First introduced industrially in the 1960s, PP-H pipes gained prominence for replacing metal pipes in corrosive environments due to their inertness to acids, alkalis, and salts. Modern formulations often include UV stabilizers for outdoor use and nucleating agents to enhance crystallization rates during production.

Physical and Chemical Properties

高冲击 PP BEC5012 北欧化工 BOREALIS 低流动 管材级 聚丙烯原料 耐热东莞市常平辰丰塑胶原料经营部(个体工商户)

PP-H pipes demonstrate a unique combination of mechanical and chemical properties. With a tensile strength of 25–38 MPa, they withstand internal pressures up to 20 bar at 20°C. The material’s thermal expansion coefficient (0.15 mm/m°C) requires proper installation with expansion loops. Chemically, PP-H resists all mineral acids below 60°C, including concentrated sulfuric and hydrochloric acids. However, it swells in chlorinated hydrocarbons like dichloromethane. The pipes maintain dimensional stability between -20°C to +95°C continuously, with short-term peak resistance to 110°C.

商家经验真实案例 · 安全可信
电缆穿管尺寸指南
本文详解保护管与电缆的尺寸匹配原则,分析过紧或过松的危害,并提供实用选型建议,帮助工程人员避免安装隐患。

Main Applications

In industrial settings, PP-H pipes transport aggressive chemicals in pharmaceutical, electroplating, and wastewater treatment plants. Their smooth inner surface (Ra ≈ 0.007 mm) prevents scaling and bacterial growth, making them ideal for ultrapure water systems in semiconductor manufacturing. The construction sector utilizes PP-H for radiant floor heating systems due to their thermal conductivity (0.22 W/mK) and oxygen barrier properties. Food-grade variants certified by FDA 21 CFR meet requirements for beverage processing lines and dairy product transfer.

Safety and Storage

新德志 聚丙烯PP中天K8003用于注塑挤出 重载部件部片材管材苏州新德志新材料有限公司

PP-H pipes are classified as non-hazardous under OSHA standards but require precautions during thermal joining. Hot air welding (200–300°C) may release volatile organic compounds (VOCs), necessitating local exhaust ventilation. Storage should avoid direct sunlight to prevent UV degradation of unmodified grades. Pipes must be stacked horizontally on flat surfaces with maximum stack height of 1.5 meters to prevent deformation. For outdoor storage, use opaque covers and maintain at least 10 cm ground clearance to prevent moisture absorption.

商家经验真实案例 · 安全可信
虹吸管的虹吸高度
本文解析虹吸管的虹吸高度原理,探讨影响高度的关键因素,如大气压力与液体密度,并提供实际应用中的注意事项,帮助理解虹吸现象的物理本质。

B2B Procurement Guide

Industrial buyers should prioritize pipes with third-party certifications like NSF/ANSI 61 for potable water or EN ISO 15874 for European markets. Key specifications to verify include standard dimension ratio (SDR), typically SDR7.4 or SDR11 for pressure applications. Bulk procurement (20+ metric tons) often attracts 8–12% discounts from manufacturers. Consider regional suppliers for cost-effective logistics—Asian producers offer competitive pricing, while European manufacturers lead in high-performance formulations with additives like carbon black for UV resistance.

Related Manufacturers