Overview
Polymer material wastewater is a byproduct of industries manufacturing or processing synthetic polymers like polyethylene, PVC, or nylon. Unlike pure chemical effluents, it contains suspended polymer fragments, plasticizers, and processing aids, making treatment complex. Globally, over 12 million tons of polymer waste enter water systems annually, with industrial sources contributing 30-40%. The wastewater’s composition varies by production stage—initial washing waters differ chemically from equipment-cleaning residues.
Physical and Chemical Properties
This wastewater typically exhibits high chemical oxygen demand (COD, often 2,000-10,000 mg/L) due to organic additives. Suspended solids (500-5,000 mg/L) include microplastics (1µm-5mm), which resist sedimentation. pH ranges from 4 (acrylic production) to 11 (nylon synthesis). Some batches contain heavy metals (e.g., cadmium stabilizers in PVC) or halogenated compounds (flame retardants), requiring specialized analysis before treatment.
Main Applications
While not intentionally produced, polymer wastewater recycling is emerging. Membrane filtration recovers up to 60% water for non-critical reuse (equipment cooling). Extracted polymers may be pyrolyzed into fuels (450-800°C) with 70-85% conversion efficiency. In construction, treated wastewater with neutralized polymers finds limited use as concrete plasticizer, though standards vary regionally. Most jurisdictions mandate zero liquid discharge (ZLD) for synthetic polymer producers.
Safety and Storage
On-site storage requires HDPE-lined concrete tanks (UV-resistant if outdoors). Explosion-proof systems are necessary for wastewater containing volatile monomers like styrene. Transport to treatment facilities demands UN-certified containers (usually UN 3082 for environmentally hazardous substances). Workers handling untreated wastewater need chemical-resistant PPE—neoprene gloves and full-face respirators for vapor protection.
B2B Procurement Guide
Procure treatment services from vendors with ISO 14034 (plastic waste management) certification. Pricing models often combine volume charges ($/m³) and contaminant load fees (extra for heavy metals). Key contract clauses should specify analytical testing frequency (e.g., weekly GC-MS for toxic additives) and liability for non-compliant discharge. Emerging solutions like enzymatic degradation (polyesterase enzymes) may offer cost savings but require pilot testing.
Related Manufacturers
- 主营：水处理填料、聚丙烯酰胺、聚合氯化铝、活性炭
- 主营：阳离子交换树脂
- 主营：高效聚氯化铝、污泥脱水、聚丙烯酰胺
- 主营：废水处理设备
- 主营：絮凝剂、聚合催化剂、脱色剂、净水剂
- 主营：生物菌种、cod专用菌、硝化细菌、工业废水处理、除磷剂、絮凝剂、石灰粉、活性炭、果壳炭、柱状炭、cod去除剂、河道黑、酰胺msds、净水滤芯、氢氧化钠、片碱纯碱、复合碳源、专用纯碱、硫酸亚铁、椰壳颗粒、煤质颗粒、碘值滤芯、印染电镀、活性污泥、生化系统、酰胺电泳
- 主营：消泡剂、杀菌剂、阻垢剂、高粘度阳离子、絮凝剂、清洗剂、重捕剂、除磷剂、破乳剂、除氟剂、除臭剂、重金属捕捉剂、缓蚀阻垢剂、飞灰螯合剂、聚丙烯酰胺、聚合氯化铝、粘泥剥离剂、油水分离剂、杀菌灭藻剂、钝化预膜剂、清洗除垢剂、漆雾凝聚剂、有机硫tmt-15、污泥脱水剂、反渗透阻垢剂、工业污水处理药剂
- 主营：聚丙烯酰胺、聚合氯化铝、聚合硫酸铁、净水材料、工业葡萄糖、乙酸钠、醋酸钠、碳源
- 主营：ppc防水、保护层、玻纤瓦、高分子无溶树脂材料、沙皮瓦、水泥浆、保护膜、网带pet、隔离层、外墙砖、聚合物、封檐板、防水板、乙烯pvc、乳胶漆、隔热漆、雨水管、雨水槽、地坪漆、落水管、沥青sbs、排水管、贺德克、落水槽、油毡瓦、钢结构
- 主营：聚丙烯酰胺、聚合氯化铝、椰壳活性炭、石英砂、锰砂
- 主营：离子交换树脂、阳离子交换树脂、阴离子交换树脂、阳树脂、阴树脂、阴阳离子交换树脂、阴阳树脂、软水树脂、混床树脂、抛光树脂、001x7 树脂、软化水树脂、除盐水树脂、超纯水树脂、食品饮料水处理树脂、净水设备树脂、D113树脂、大孔吸附树脂、732树脂、D113丙烯酸树脂、碱性树脂、螯合树脂、超纯水抛光树脂、001×8软水树脂、多功能催化树脂
- 主营：阶梯环、塑料扁环、金属扁环、聚丙烯高流环、脱硫塔填料、精馏塔填料、沸石分子筛、塑料贝它环、超级拉西环、金属散堆填料
- 主营：活性炭、酰胺、聚合氯化铝
- 主营：聚丙烯酰胺、脱色除磷剂、聚合硫酸铁、净水絮凝剂、溶气气浮机、粉状絮凝剂、污水处理药剂、溶气气浮装置、污水净水药剂、水处理絮凝剂、污水处理设备、污水处理脱色剂、混凝沉淀絮凝剂、污水处理净水剂
- 主营：聚羧酸减水剂、减水剂、石膏砂浆、木质素、木质素磺酸钠、木质素磺酸钙、木质素磺酸盐、混凝土外加剂、萘系减水剂、BYK流平剂、无碱速凝剂、木钠、木钙、羟丙基甲基纤维素
- 主营：聚丙烯酰胺、絮凝剂、聚合氯化铝、破乳剂、硫酸铝、净水剂、聚合硫酸铁、脱色剂、硫酸亚铁、阻垢剂、杀菌剂、除磷剂、碳源