Overview
Polymer demulsifiers are surface-active agents designed to destabilize and separate emulsions, particularly water-in-oil emulsions common in petroleum extraction. These specialty chemicals contain polymeric structures that disrupt the interfacial film stabilizing emulsions. Developed as an improvement over traditional demulsifiers, polymer variants offer higher efficiency, lower dosage requirements, and better environmental profiles. Their molecular architecture can be tailored for specific emulsion types and operating conditions.
Physical and Chemical Properties
Polymer demulsifiers typically exhibit low viscosity and moderate density. Their effectiveness stems from amphiphilic structures containing both hydrophilic (e.g., ethylene oxide) and hydrophobic (e.g., propylene oxide) segments. Thermal stability ranges between 50-150°C depending on formulation, making them suitable for most oilfield applications. pH tolerance generally spans 4-10. The products demonstrate rapid adsorption at oil-water interfaces, reducing interfacial tension significantly within minutes.
Main Applications
Primary use occurs in crude oil processing where they separate produced water from oil. Offshore platforms and refineries account for over 70% of global consumption. Other applications include lubricant oil purification and wastewater treatment in chemical plants. In enhanced oil recovery (EOR), polymer demulsifiers help process surfactant-flooded crude. Some formulations serve dual functions as corrosion inhibitors or paraffin dispersants, providing operational synergies.
Safety and Storage
Most polymer demulsifiers are classified as flammable liquids (Category 3). Proper storage requires ventilated areas with explosion-proof equipment. Secondary containment is recommended for bulk storage to prevent environmental contamination. Personnel should wear nitrile gloves and chemical goggles when handling. Spills should be contained with absorbent materials—never washed into drains. Shelf life typically exceeds 12 months when stored below 30°C in original sealed containers.
B2B Procurement Guide
Industrial buyers should specify: 1) Target emulsion characteristics (water cut, salinity) 2) Required separation speed 3) Compatibility with existing process chemicals. Pilot testing is strongly advised before bulk purchases. Reputable suppliers provide technical datasheets with performance benchmarks under standard test conditions (e.g., Bottle Test ASTM D4007). Consider suppliers with ISO 9001 certification and batch-to-batch consistency guarantees. Bulk shipments (IBC totes or tankers) offer better economics for large-volume users.
Related Manufacturers
- 主营：专用剂、消泡剂、固化剂、原油破乳剂、工业破乳剂、工业污水破乳剂、油田原油破乳剂、活性炭、净化剂、聚合氯化铝、净化澄清剂、表面活性剂、河湖澄清剂、工业级木质粉炭、河湖净化剂、液体菌种、脱氰剂、微生物菌种、固体脱色剂、液体脱色剂、有机物催化酶、杀菌剂、除臭剂、复合碳源、好氧菌
- 主营：补碳剂、澄清剂、处理剂、破乳剂、絮凝剂、固化剂、活性炭、合碳源、锁磷剂、除臭剂、脱氟剂、专用剂、消泡剂、降氟剂、去除剂、净化剂、化合物、降解剂、除氟剂、除泡剂、废水处、净水剂、修复剂、包装桶装、粉末颗粒
- 主营：陶粒滤料、石英砂、斜板填料、破乳剂、翻板滤池、滤板模板、整体滤板、脱硫脱硝、纤维滤料、塑料滤砖、深床滤池、臭氧催化剂、可调节滤帽、硫自养填料、悬浮球滤料、反硝化滤池、黄色纤维球、硫自养滤料、侧向流斜板、管式曝气器、长柄滤头滤帽、泥水分离装置、絮凝网格填料、防堵长柄滤头、反硝化滤料填料、纤维球滤料
- 主营：聚丙烯酰胺、菌种、重金属捕捉剂、破乳率高、聚合氯化铝
- 主营：重金属捕捉剂、除氟剂、消泡剂、破乳剂价格、聚丙烯酰胺、聚合氯化铝、有机硫tmt15、除臭剂、污水处理药剂、氨氮去除剂、聚合硫酸氯化铁、煤矿防火阻化剂
- 主营：聚合氯化铝、污泥调理剂、聚合硫酸铁、破乳剂、聚合氯化铝铁、聚丙烯酰胺、漆雾絮凝剂、脱色剂、除氟剂、复合碳源
- 主营：除臭剂、氨氮去除剂、COD处理剂、破乳剂、总氮去除剂、除磷剂、污水处理、水处理药剂、聚丙烯酰胺、聚合氯化铝、脱色剂、絮凝剂、混凝剂、重金属捕捉剂、污水菌种、污水处理药剂、除铜剂
- 主营：阻垢剂、氨氮去除剂、重金属捕捉剂、破乳剂、消泡剂、缓蚀阻垢剂、絮凝剂、无磷阻垢剂、杀菌灭藻剂、有机硅消泡剂、除垢剂、除臭剂、脱硫增效剂、黏泥剥离剂、锅炉阻垢剂、乙二醇缓蚀剂
- 主营：焦油破乳剂、高分子聚凝剂、焦油脱水剂
- 主营：树脂合、木质素、分析纯、高分子化合物、化学试剂、涂覆金属、己二醇酯、油墨pu树脂、水性pu树脂、二乙二醇酯、二酸二甲酯、聚酯多元醇、树脂固化剂、水性聚氨酯、聚酰胺树脂、聚氨酯树脂、聚氨酯弹性体、水性喷墨打印、聚碳酸酯二醇、面料柔软整理、己二酸乙二醇、改性聚酰亚胺
- 主营：絮凝剂、生物球、活性炭、破乳剂、鹅卵石、无烟煤、醋酸钠、沉淀剂、乙酸钠、污水填料、加厚斜管、凝胶电泳、斜管填料、pac净水剂、组合填料、蜂窝斜管、生物填料、空心球填料、聚丙烯酰胺、多孔环填料、斜管沉淀池、好氧池填料、纤维球滤料、改性纤维球、聚合氯化铝、碳基磷灰石
- 主营：润滑油添加剂、清净分散剂、抗磨剂、润滑油破乳剂、抗氧防老剂、乳化剂、内燃机油复合剂、工业油复合剂
- 主营：聚合氯化铝、硫酸铝、乙酸钠、破乳剂、复合碳源、聚合硫酸铁、脱色剂、消泡剂、一体化污水处理设备
- 主营：固化剂、表面处理剂、无机矿物颜填料、破乳剂、氨基硅烷偶联剂
- 主营：聚丙烯酰胺、絮凝剂、聚合氯化铝、破乳剂、硫酸铝、净水剂、聚合硫酸铁、脱色剂、硫酸亚铁、阻垢剂、杀菌剂、除磷剂、碳源