Aicaigou LogoB2B Wiki

Polyether Leveling Agent

Updated: 2026-07-15

Overview

Polyether leveling agents are polymer-based additives designed to optimize the flow and leveling of liquid coatings. They function by reducing surface tension gradients during film formation, enabling even distribution across substrates. These agents are particularly valued in high-gloss and defect-sensitive applications. Developed as alternatives to silicone-based levelers, polyether variants offer better recoatability and fewer interfacial issues. They are synthesized through controlled polymerization of ethylene oxide/propylene oxide, yielding tunable hydrophilicity and molecular weights.

Physical and Chemical Properties

Polyether leveling agents exhibit low volatility and high thermal stability, making them suitable for baking coatings (up to 150°C). Their amphiphilic structure allows simultaneous interaction with polar resins and non-polar solvents. Key metrics include dynamic surface tension reduction (typically to 25–30 mN/m) and glass transition temperature (Tg) ranges of -50°C to 0°C. Viscosity varies from 200–2,000 mPa·s at 25°C depending on chain length. Unlike silicones, they rarely cause cratering or fish-eyes.

Main Applications

In automotive OEM coatings, these agents prevent brush marks and improve metallic flake orientation. Industrial wood coatings utilize them to achieve Class I finishes without sanding. Waterborne architectural paints benefit from their foam-control synergy with defoamers. Specialized uses include UV-curable inks (where rapid leveling precedes curing) and coil coatings requiring high-edge coverage. Some formulations are FDA-compliant for food-contact packaging coatings.

Safety and Storage

While generally low-toxicity (LD50 >2,000 mg/kg), prolonged skin contact may cause mild irritation. Containers should be grounded during transfer to prevent static accumulation. Storage life is typically 24 months in original packaging. In case of spills, absorb with inert material (vermiculite) and dispose per local regulations. Wastewater treatment plants may require pre-treatment due to moderate COD (Chemical Oxygen Demand) levels.

B2B Procurement Guide

When sourcing, specify required hydroxyl value (mg KOH/g) and pH tolerance range. For water-based systems, verify cloud point (usually >80°C). Bulk shipments often use 200kg drums or isotanks. Leading manufacturers include BYK-Chemie, Evonik TEGO, and Dow. Request batch-specific certificates of analysis for kinematic viscosity and active content. Sample testing should assess compatibility under production conditions.

Related Manufacturers