Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

Polyester Modified Asphalt

Updated: 2026-08-07

Overview

Polyester-modified asphalt is a specialized construction material created by blending conventional asphalt with synthetic polyester polymers. The modification process enhances the material's mechanical properties, making it ideal for demanding applications such as high-traffic roads and extreme weather conditions. This product addresses common issues with traditional asphalt, including brittleness at low temperatures and rutting under heavy loads. The polyester additives form a reinforcing network within the asphalt matrix, significantly improving its performance characteristics.

Physical and Chemical Properties

PA66 上 海 索尔维 A 20 V25 BK 注塑级 红磷阻燃 玻纤增强尼龙颗粒东莞市巨烨新材料有限公司

The material exhibits superior elasticity with typical elongation at break values exceeding 300%, compared to <50% for unmodified asphalt. Its softening point ranges between 70–100°C, significantly higher than conventional asphalt's 40–55°C, providing better resistance to high-temperature deformation. Polyester-modified asphalt demonstrates excellent aging resistance due to the polymer's ability to absorb UV radiation. Laboratory tests show retained flexibility after 5 years of service, with penetration values decreasing by only 15–20% compared to 40–50% for standard asphalt.

商家经验真实案例 · 安全可信
PC与PVC材质大不同
本文详细解析PC和PVC两种常见材质的区别,包括它们的特性、应用场景及优缺点,帮助读者快速了解如何根据需求选择合适的材质。

Main Applications

In road construction, this material is primarily used for stress-absorbing membrane interlayers (SAMIs) and surface courses on bridges, where its flexibility prevents reflective cracking from underlying layers. Airports frequently specify it for runway surfaces due to its exceptional resistance to jet fuel spillage. The roofing industry utilizes polyester-modified asphalt in premium waterproofing membranes, particularly for flat roofs in commercial buildings. Its thermal stability prevents sagging in summer, while winter flexibility prevents cracking. Recent innovations include its use in cold-applied formulations for environmentally sensitive projects.

Safety and Storage

xy耀碳 煤 沥青生产厂家 改质 中温 有效提升产品性能河北耀碳化工科技有限公司

While not classified as highly hazardous, the material requires proper handling due to its high application temperatures (typically 160–180°C). Adequate ventilation is essential when heating to prevent fume accumulation, which may contain trace amounts of polycyclic aromatic hydrocarbons. Storage tanks should be equipped with heating coils to maintain optimal viscosity (about 150–200 cSt at application temperature). Bulk storage life is approximately 6 months when protected from oxygen and moisture. Small containers should be kept tightly sealed to prevent skin formation.

商家经验真实案例 · 安全可信
PC的韧性解析
本文探讨PC材料的韧性表现,从分子结构到实际应用中的抗冲击能力,分析其在不同环境下的耐用性,帮助读者全面了解PC材料的特性。

B2B Procurement Guide

When sourcing polyester-modified asphalt, buyers should prioritize suppliers with ISO 9001 certification for consistent quality. Key specification parameters include penetration grade (commonly 60/70 or 80/100), softening point (minimum 70°C), and elastic recovery (minimum 60%). For large infrastructure projects, consider suppliers offering mobile modification units that can tailor the polymer content on-site. Bulk shipments typically offer 10–15% cost savings versus packaged products. Always request third-party test reports for viscosity-temperature susceptibility and force ductility.

Related Manufacturers