Overview
Polyamide wax thickener is a synthetic rheology modifier derived from polyamide resins. It forms microcrystalline networks in liquid systems, imparting thixotropic behavior to prevent pigment settling and sagging. Unlike inorganic thickeners (e.g., fumed silica), it offers better transparency and gloss retention. Primarily used in solvent-based systems, this additive activates under shear stress, allowing easy application while maintaining viscosity at rest. Its effectiveness depends on factors like concentration, solvent type, and activation temperature.
Physical and Chemical Properties
Polyamide wax thickeners exhibit pseudoplastic flow, reducing viscosity under shear (e.g., brushing or spraying) and recovering structure afterward. They are thermally stable up to 200°C, making them suitable for high-temperature processes like powder coatings. Chemically inert, they resist hydrolysis and oxidation. Particle size (typically 5–20 µm) influences dispersion efficiency. Grades vary by hydroxyl value (10–50 mg KOH/g), affecting compatibility with polar solvents like alcohols or ketones.
Main Applications
In coatings, polyamide wax prevents sagging on vertical surfaces and enhances leveling. Marine and industrial coatings benefit from its corrosion inhibition by reducing pigment sedimentation. Printing inks use it to control dot gain and misting. Adhesives leverage its shear-thinning for easy spreading and instant grab. Specialty applications include gel coats and nail polishes where clarity and texture matter.
Safety and Storage
Classified as non-hazardous under GHS, polyamide wax requires no special handling beyond dust control. Use PPE (gloves, goggles) during bulk handling to avoid irritation. Store in sealed containers away from heat and humidity. Shelf life exceeds 2 years if stored properly. In case of spills, sweep up dry material; avoid water to prevent clumping.
B2B Procurement Guide
Specify technical requirements: target viscosity (e.g., 5,000–10,000 cP), solvent compatibility (aromatic/aliphatic), and activation temperature (often 40–60°C). Request samples for compatibility testing with your formulation. Bulk buyers (1+ tons) can negotiate discounts. Leading suppliers include BYK, Elementis, and Lubrizol. MOQs typically start at 25 kg.
Related Manufacturers
- 主营：微粉状聚酰胺蜡、防螨助剂、树脂油墨稀释剂
- 主营：防冻液、冰醋酸、乙二醇、聚酰胺蜡流变助剂、冰乙酸、纯吡啶、丙二醇、羟基苯、14丁二醇、3-丙三醇、四氢呋喃、环保乙腈、化工苯酚、1.4丁二醇、医用苯酚、工业苯酚、精制苯酚、价位四氢、乙腈工业、乙酸乙酯、吡啶化工、甲酸乙酯、吡啶工业、求购苯酚、高纯三氯、实验乙腈
- 主营：聚苯胺、脯氨酸甲酯盐酸盐、苄基三甲基氯化铵
- 主营：二氧化硅、乳化剂、分散剂、微粉状聚酰胺蜡、防水防油剂
- 主营：异辛醇、乳化剂、乙烯醚、聚乙二醇、聚氧乙烯、嵌段聚醚、醚羧酸、脂肪醇、分散剂、染色助剂、异构醇醚、泊洛沙姆、椰油酰胺、基羟乙基、烷基糖苷、特辛基酚、单油酸酯、异构十三醇、丙烯磺酸钠、氢化蓖麻油、丙烯酰胺基、醇醚葡糖苷、低泡渗透剂、甲酯乙氧基、癸基葡糖苷
- 主营：触变剂、树脂
- 主营：三异氰酸酯
- 主营：抗氧剂、乳化剂、苯扎氯铵、聚氧乙烯醚、甘油聚氧丙烯醚、烷基二甲基、氢化蓖麻油、表面活性剂、双链季胺盐、二丁基羟基甲苯、十二烷基硫酸钠、树脂、助剂
- 主营：架桥剂、YW100 锂萃取剂、端羧基液体丁腈橡胶、聚酰胺蜡触变剂6500、10-羟基癸酸、苯乙烯磷酸、肉豆蔻酸镁、硬脂酸钴、全氟三丁胺、乙烯基磷酸二乙酯、磷酸锰铁锂、β-磷酸三钙、十一烯酸、钨酸铝、1-乙炔基环已醇、间二异丙苯、锂硅合金、溴甲酚绿、生物活性玻璃、溴代海因树脂颗粒、红铝、龙涎酮、原丁酸三甲酯
- 主营：二氧化硅、乳化剂、消泡剂、分散剂、润湿剂、增稠剂、树脂、抗氧剂、杀菌防腐防霉剂、uv单体
- 主营：乙酸镁、阻燃剂、热熔胶、聚合物、聚丙烯、锂电池、光电极、泡泡糖、氯丁胶、碳酸镉、新癸酸、补差价、稀释剂、羟乙基、氧化铝、氧化铜、甲酸钾、c/c材料、碳酸锰、玻璃粉、硬光油、防腐剂、氧化铋、防水剂、增粘树
- 主营：丙二胺、十四酸、棕榈酸、聚合醇胺、正壬胺、十烷酸、苯酰氯、醋酰胺、甲酸钠、工业级1、工业级e0、工业级mpd、十二叔胺、四氢呋喃、四甲撑硫、cyc环己酮、六氢苯酐、月桂酰胺、丙烯酰氯、十六叔胺、氯乙酰氯、盐酸羟胺、苯磺酰氯、蓖麻油酸、苯扎氯铵
- 主营：二十醇、钒酸酐、键合剂、聚醚胺、二聚酸、环戊酮、甲醇钾、正辛烷、三甲胺、双甲酮、戊二醇、异戊烷、正癸醇、新癸酸、清洗剂、磷酸酐、水合物、异戊醇、磷酸酯、异辛烷、氯化锌、化妆品、苯甲胺、水芹醛、正壬醇
- 主营：消泡剂、手感剂、流平剂、聚酰胺、成核剂、湿润分散剂、表面活性剂、光稳定剂、紫外线吸收剂、偶联剂、固化剂、附着力促进剂、抗静电剂、扩链剂、光扩散剂、增韧剂、光引发剂、催干剂、涂料助剂、塑料助剂
- 主营：化工中间体、有机中间体、香精香料、聚酰胺蜡触变剂6500、添加剂、表面活性剂、天然/合成树脂、分析试剂、日化原料、催化剂、高分子材料