Overview
Polyacrylamide (PAM) testing evaluates the quality and performance of this synthetic polymer, which is critical for industries like water treatment and oil recovery. Tests measure properties such as molecular weight, viscosity, and residual acrylamide content to ensure compliance with safety and efficacy standards. PAM is classified into anionic, cationic, and non-ionic types, each requiring specific testing protocols. Regulatory bodies like the EPA and ISO set limits for residual acrylamide, a potential carcinogen, making rigorous testing essential for B2B applications.
Physical and Chemical Properties
Key tested properties include molecular weight (via gel permeation chromatography), viscosity (using viscometers), and charge density (for ionic PAM). Residual acrylamide is quantified via HPLC or GC-MS, with limits often below 0.05%. PAM's solubility and flocculation efficiency are tested under simulated field conditions. Thermal stability tests assess decomposition temperatures, which typically exceed 200°C. These properties determine suitability for high-temperature applications like oil drilling.
Main Applications
In water treatment, PAM testing ensures effective flocculation of suspended solids. For enhanced oil recovery (EOR), tests confirm shear resistance and viscosity retention under reservoir conditions. Papermaking uses PAM as a retention aid; tests focus on fiber-binding capacity. Mining applications require tests for sedimentation rates. Each sector has tailored standards, such as API RP 63 for oilfield-grade PAM.
Safety and Storage
PAM itself is low-toxicity, but residual acrylamide requires strict control. Testing must comply with OSHA and IARC guidelines. Storage stability tests check for moisture absorption and clumping over time. Bulk PAM should be stored in sealed containers at <30°C. Dust control measures are critical during handling to prevent inhalation. PPE like gloves and masks is mandatory for lab technicians during testing.
B2B Procurement Guide
Buyers should request certificates of analysis (CoA) for each batch, including molecular weight distribution and residual monomer levels. Partner with ISO 9001-certified suppliers for consistent quality. For water treatment, prioritize NSF/ANSI 60-certified PAM. Oilfield buyers should verify API compliance. Sample testing before large orders is recommended, with a focus on performance under project-specific conditions.
Related Manufacturers
- 主营：聚丙烯酰胺、污泥脱水
- 主营：铁碳填料、还原铁粉、配重铁粉、聚丙烯酰胺PAM、化工铁粉、混凝土滤板、磁粉、柔性防水套管、刚性防水套管、ABS滤板模板、石英砂滤料、无烟煤滤料、蜂窝斜管填料、盘式曝气器、活性炭、微电解填料、锰砂滤料、蜂窝活性炭、多孔悬浮球填料、套筒补偿器、旋转补偿器、可提升曝气器、滤头、聚合氯化铝PAC、水处理磁粉
- 主营：处理剂、污水cod、絮凝剂、离子聚丙烯、cod当量、培养剂、醋酸钠、环保药剂、淀粉标准、酰胺用量、cod去除剂、防水乳液、氯化铝絮凝、氯化铝国标、臭味降解剂、葡萄糖成分、超标去除剂、酰胺添加量、硫酸铁国标、净水剂聚合、废水去除剂、聚合氯化铝、工业葡萄糖、污水除臭剂、硫酸铁除磷
- 主营：椰壳活性炭、无烟煤滤料、石英砂滤料、锰砂滤料、蜂窝斜管填料、煤质柱状活性炭、微孔曝气器、纤维球滤料、863彗星式纤维滤料、火山岩
- 主营：口罩检测项目、消毒产品检测、口罩盐性检测、成分分析、消字号申请
- 主营：运输条件鉴定、化妆品功效评价、病毒杀灭试验、毒理检测、消毒产品检测、土壤检测、涉水产品检测、空气净化产品检测、塑胶跑道检测、洁净室检测、抗菌防霉检测、固废检测、消毒设备检测、化妆品检测、水处理剂检测、涂料检测、无尘车间检测、危废鉴别、产品质量鉴定、成分分析、海洋测绘、海洋监测
- 主营：纺织品、覆面材料、纺织面料、检测技术、检测中心、检测平台、检测设备、纤维检测、检测实验室、五氯苯酚、儿童服装、童装绳索、服装机械、儿童服饰安全
- 主营：重金属捕捉剂、除氟剂、消泡剂、聚丙烯酰胺、聚合氯化铝、有机硫tmt15、除臭剂、污水处理药剂、氨氮去除剂、聚合硫酸氯化铁、煤矿防火阻化剂
- 主营：消泡剂、活性炭、阻垢剂、聚丙烯酰胺、除垢剂、杀菌灭藻剂、醋酸钠-乙酸钠、工业葡萄糖、纤维球、复合碳源、重金属捕捉剂、除磷剂、除臭剂、除氟剂、氨氮去除剂
- 主营：除臭箱火山岩填料、除臭箱松树皮填料、除臭箱竹炭填料、除臭箱陶粒填料、悬浮球填料、蜂窝斜管填料、火山石、火山岩、松树皮、竹炭、陶粒、石英砂、活性炭、鹅卵石、斜管填料、纤维球滤料、彗星纤维滤料、多面空心球
- 主营：聚合氯化铝、聚合硫酸铁、活性炭、聚丙烯酰胺、葡萄糖、醋酸钠、碳源
- 主营：破乳剂、脱色剂、反渗透阻垢剂、聚丙烯酰胺、聚丙烯酰胺乳液、生物增效剂、好氧菌、焦化除氰剂
- 主营：絮凝剂、聚合氯化铝、聚合氯化铝铁、聚丙烯酰胺、除磷剂、PAM、PAC、硫酸亚铁、聚合硫酸铁、絮凝剂生产厂家、聚合氯化铝生产厂家、净水剂、活性炭、粉状活性炭、柱状活性炭、蜂窝活性炭、七水硫酸亚铁、COD去除剂、氨氮去除剂
- 主营：聚丙烯酰胺、聚合氯化铝
- 主营：穿孔杯、标准间隙杯、电穿孔电击杯、精准容量电击杯、细胞转染专用杯