Overview
Polyacrylamide crosslinker is a specialized chemical agent used to enhance the properties of polyacrylamide gels by forming crosslinks between polymer chains. It is widely employed in industries requiring gel formation with improved mechanical strength and thermal stability. The crosslinker works by creating covalent bonds between polymer chains, resulting in a three-dimensional network. This process significantly improves the gel's viscosity, elasticity, and resistance to degradation under harsh conditions.
Physical and Chemical Properties
Polyacrylamide crosslinkers are typically available as white to off-white powders or liquids. They are highly soluble in water, making them suitable for aqueous applications. The density of powdered forms commonly ranges between 1.1-1.2 g/cm³. These compounds do not have a distinct melting point as they decompose before reaching melting temperatures. Their effectiveness is pH-dependent, with optimal performance usually observed in neutral to slightly alkaline conditions (pH 7-9).
Main Applications
In water treatment, polyacrylamide crosslinkers are crucial for creating flocculants that remove suspended solids and clarify wastewater. The crosslinked polymers form larger, more stable flocs that settle faster and improve filtration efficiency. The petroleum industry utilizes these crosslinkers in enhanced oil recovery (EOR) operations. They help create viscous gels that improve sweep efficiency in reservoirs, increasing oil yield. In cosmetics, they serve as thickeners and stabilizers in lotions and creams.
Safety and Storage
Proper handling of polyacrylamide crosslinkers requires personal protective equipment (PPE) including gloves, goggles, and dust masks. While not highly toxic, prolonged skin contact or inhalation of powder should be avoided to prevent irritation. Storage conditions significantly impact product stability. The crosslinker should be kept in a cool (below 30°C), dry environment with minimal exposure to moisture. Sealed containers are essential to prevent degradation and maintain effectiveness over time.
B2B Procurement Guide
When sourcing polyacrylamide crosslinkers, buyers should prioritize suppliers with proven quality control measures. Key specifications to verify include purity level (typically 95-99%), solubility rate, and compatibility with existing polymer systems. Bulk purchasing (tonnage quantities) generally offers better pricing, but buyers should balance cost with storage capacity and usage rates. Technical support from suppliers is valuable for optimizing application parameters and troubleshooting performance issues.
Related Manufacturers
- 主营：柔软剂、固色剂、亲水硅油、长效交联剂、蓬松剂、蓬松硅油、日晒牢度提升剂、手感剂、棉感剂、抗酚黄变剂
- 主营：[]
- 主营：絮凝剂、碱性紫、碱性品红、聚丙烯酰胺、碱性大红、水性染料、化工助剂、化肥染料、造纸板材、专用染料、碱性品兰、碱性嫩黄o、化肥着色剂、聚合氯化铝、黄佛香染料、碱性玫瑰精、粘性液体橡胶、净水处理药剂、栗子元青色染料
- 主营：聚乙烯亚胺、聚乙烯胺、PEI、氮丙啶交联剂、碳化二亚胺交联剂、长效交联剂、皮革交联剂、压敏胶水固化剂、保护膜胶水固化剂、聚乙烯蜡乳液、印花催化剂、绒毛手感剂、干滑手感剂、油滑手感剂、防真植物防粘剂、螺杆清洗料、抗水解剂、耐水解剂、碳化二亚胺抗水解剂、粉滑手感剂、丝滑手感剂、尼龙抗水解剂、聚氨酯抗水解剂、弱粘剂、聚乳酸抗水解剂
- 主营：聚丙烯酰胺、污泥脱水
- 主营：消泡剂、杀菌剂、阻垢剂、聚丙烯酰胺、絮凝剂、清洗剂、重捕剂、除磷剂、破乳剂、除氟剂、除臭剂、重金属捕捉剂、缓蚀阻垢剂、飞灰螯合剂、聚合氯化铝、粘泥剥离剂、油水分离剂、杀菌灭藻剂、钝化预膜剂、清洗除垢剂、漆雾凝聚剂、有机硫tmt-15、污泥脱水剂、反渗透阻垢剂、工业污水处理药剂
- 主营：硫酸铝、除磷剂、沉降剂、聚丙烯酰胺、混合器、絮凝剂、cod去除、滤水帽、活性炭、鹅卵石、石英砂、软水盐、制氮机、干燥剂、介质粉、覆盖球、排水帽、混凝剂、沉淀池、再生剂、填料球、阻化剂、吸附剂、净水剂、磁粉磁种、弹性填料
- 主营：聚合氯化铝、聚合硫酸铁、工业葡萄糖、聚丙烯酰胺、乙酸钠、醋酸钠、碳源
- 主营：降粘剂、稠化剂、1-氯甲基萘、悬浮矿粉交联剂、医药中间体、酸化缓蚀剂、氧化破胶剂、转向剂、消泡剂、金属减阻剂
- 主营：聚丙烯酰胺、聚合聚氯化铝、一般水处理药剂等
- 主营：pam药剂、聚合氯化铝、水处理药剂、聚丙烯酰胺、絮凝沉淀剂、聚合硫酸铁
- 主营：杀菌剂、乳化剂、钝化剂、钝化膏、防腐剂、除菌剂、除藻剂、除垢剂、灭藻剂、清洗剂、阻垢剂、抑垢剂、缓蚀剂、粘泥剥离剂、去除剂、消泡剂、脱硫脱硝剂、抑尘剂、复合碳源、助凝剂、除磷剂、一水柠檬酸、脱销剂、还原剂、絮凝剂
- 主营：粘土稳定剂、体膨颗粒、堵漏剂、有机复合铬交联剂、暂堵剂、铁离子稳定剂、丙烯酸盐、丙烯酸盐喷膜防水材料、丙烯酸盐灌浆材料、压裂用粘土稳定剂、注水用粘土稳定剂、酸化用粘土稳定剂、防膨剂、聚表剂、冲砂洗井暂堵剂、丙烯酸盐注浆液、预交联凝胶颗粒、丙烯酸酯、水驱流向改变剂、丙烯酸盐喷膜、防水剂、丙烯酸盐灌浆料、丙烯酸盐灌浆液、丙烯酸盐注浆材料、灌浆材料、注浆液
- 主营：回收油漆、回收染料、回收树脂、交联剂、回收机油、回收橡胶、回收助剂