Overview
Plastic flakes are small, flat particles derived from various polymer materials through specialized manufacturing processes. These flakes are engineered to provide specific performance characteristics in end-use applications. They are commonly produced from thermoplastics like polyethylene (PE), polyvinyl chloride (PVC), or polyethylene terephthalate (PET). The production involves either mechanical milling of bulk polymers or precipitation from solution to achieve the desired flake morphology.
Physical and Chemical Properties
The physical properties of plastic flakes vary significantly depending on the base polymer material. Common characteristics include excellent chemical resistance, low moisture absorption, and good thermal stability within their operating temperature ranges. Chemically, these flakes are inert to most acids, alkalis, and solvents, making them suitable for harsh environmental conditions. The specific gravity typically ranges from 0.9 to 1.4, with particle sizes commonly between 0.1 to 5 mm in diameter.
Main Applications
Plastic flakes find extensive use in industrial anti-corrosion coatings, where they create overlapping barrier layers that significantly reduce permeability. They are also incorporated into polymer composites to enhance mechanical properties and dimensional stability. In construction, they're used in waterproofing membranes and as additives in concrete to improve durability. Other applications include use in automotive components, marine coatings, and as fillers in various plastic products.
Safety and Storage
While generally stable, plastic flakes require proper handling to prevent dust formation which could pose inhalation hazards. Appropriate personal protective equipment including dust masks is recommended during processing. Storage should be in sealed containers in dry areas below 30°C. Some types may require protection from UV light to prevent degradation. Compatibility with other materials should be verified before mixing.
B2B Procurement Guide
When sourcing plastic flakes, buyers should specify the polymer type, particle size distribution, and any special surface treatments required. Technical data sheets should be requested to verify key performance parameters. Bulk purchasing typically offers cost advantages, but storage capacity and shelf life should be considered. Quality certifications like ISO 9001 and material safety data sheets (MSDS) should be required from suppliers.
Related Manufacturers
- 主营：润滑剂、石墨粉、细粉石墨、鳞片石墨粉、密封胶条、超细石墨、高纯石墨、煅烧高岭土、耐火泥造纸、润滑石墨铅粉、合成氟金云母粉、高岭土、种子包衣粉、麦饭石粉、白色电气石粉、远红外粉
- 主营：超细硅酸铝粉、硅藻土、膨润土、玻璃鳞片、高岭土、滑石粉、彩砂、透明粉、白炭黑、金刚砂、石墨、海泡石、木粉、轻钙、重钙、玻璃粉、贝壳粉、凹凸棒土、陶土、铝矾土、火山岩、电气石粉、合成云母、赤铁粉
- 主营：蛭石、海泡石、矿物纤维、塑料鳞片石墨、防火涂料、漂珠、石油焦、石墨颗粒、云母粉、火山球、重钙、滑石粉、轮胎粉、钾长石、叶腊石、氧化铝、碳酸钙
- 主营：氟金云母、云母片、云母粉、玻璃鳞片、高岭土、滑石粉、碳酸钙、石墨粉、电气石、岩片、膨润土、陶土、海泡石、白炭黑、重晶石粉、沸石、石英砂、透明粉、粘土、蛭石、硅藻土、果壳粉
- 主营：尼龙板、提升板、压链板、塑料链片、高耐磨、刮料板、pa66尼龙、尼龙衬板、乙烯链板、尼龙链片、增强阻燃、乙烯刮板、牛筋盘片、输送机链板、白色代扣管、管链机塞盘、管链机盘片、聚乙烯刮片、聚乙烯碟片、输送机链盘、输送机料盘
- 主营：海泡石、蛭石、云母、鳞片石墨、石油焦、石墨颗粒、焦炭
- 主营：玻璃粉、火山石粉、云母粉、玻璃鳞片、云母片、电气石粉、陶瓷砂、石英粉、莫来石粉、硅酸铝粉、轻钙粉、珍珠岩颗粒、透明粉、铝矾土、重钙粉、煅烧高岭土、蛭石、煅烧贝壳粉、硅灰石粉、高硅滑石粉、低硅滑石粉、全加密硅灰、半加密硅灰
- 主营：聚脲腻子、环氧腻子、环氧胶泥、环氧玻璃鳞片涂料、玻璃鳞片胶泥、乙烯基玻璃鳞片胶泥、环氧玻璃鳞片、PTU防水自粘卷材、乙烯基防腐涂料、环氧树脂、乙烯基树脂、环氧砂浆、环氧涂料、3301树脂、玻璃钢树脂、环氧玻璃钢树脂、环氧富锌底漆、环氧云铁中间漆、丙烯酸聚氨酯面漆、环氧沥青漆、环氧重防腐涂料、环氧稀胶泥、彩钢瓦漆、聚酯砂浆
- 主营：高岭土、玻璃粉、膨润土、玻璃鳞片、滑石粉、铝矾土、硅灰、萤石粉、沉淀硫酸钡、重钙、轻钙、硅藻土、珍珠岩、玻璃微珠、重晶石粉、S95矿粉、透明粉、煅烧高岭土、玻璃砂、云母粉、木炭、硅酸铝粉、长石粉、火山石、贝壳粉
- 主营：重钙粉、白云石、石英砂、金刚砂、高岭土、陶土粉、重晶石粉、石英粉、膨润土、橡胶粉、铝矾土、麦饭石粉、蛭石、滑石粉、轻质碳酸钙、凹凸棒土、长石粉、粘土球、白云石粉、硅微粉、珍珠岩粉、偏高岭土粉、氧化钙、氢氧化钙
- 主营：Pa66、聚丙烯、聚乙烯、通用塑料、工程塑料、POM、聚甲醛、亚克力、弹性体、EVA
- 主营：POM塑胶原料、PA66塑胶原料、PA6塑胶原料、PVA降解塑料、PA12塑胶原料、LCP塑胶原料、PPO塑胶原料、ABS塑胶原料、PC塑胶原料、TPEE塑胶原料、TPU塑胶原料
- 主营：麦饭石粉、滑石粉、沸石粉、氧化钙、膨润土、白云石粉、橡胶粉、石英粉、硅微粉、碳酸钙、石墨、硅藻土、抗菌粉、氢氧化钙、消石灰、陶土、活性白土、金刚砂、木粉、磁粉、海泡石粉、二氧化硅、高岭土、负离子粉
- 主营：铝矾土、线圈胶泥、感应电炉炉衬、中间包可塑料、酸性炉衬材料、中性炉衬材料、捣打料、干振料、加热炉浇灌料、硅质打炉料、可塑快速修补料、石英砂、中频炉炉衬料、高岭土、透热炉打结料、橡胶颗粒、氢氧化钙、机制木炭、膨润土、绿泥白泥修补料、火山石板材、氧化钙、凹凸棒土粉、沸石粉沸石颗粒
- 主营：石油焦、蛭石、云母、塑料鳞片石墨、海泡石、矿物纤维、漂珠、重晶石、氧化铝、增碳剂、橡胶颗粒、膨润土、石墨颗粒、高岭土、钾长石、滑石粉、轮胎粉、膨胀石墨、重钙、轻钙、防火涂料、硅藻土