Overview
Pickled cold rolled steel is a premium-grade steel product that undergoes two critical processes: acid pickling and cold rolling. The acid pickling removes oxides and impurities from the hot-rolled steel surface, while cold rolling enhances its mechanical properties and surface finish. This combination results in a material with superior strength, formability, and appearance, making it a preferred choice for demanding applications. Industries such as automotive manufacturing, home appliances, and construction rely heavily on pickled cold rolled steel due to its consistent quality and performance. The material's ability to maintain tight tolerances and resist corrosion (when properly coated) further adds to its versatility.
Structure and Working Principle
The production of pickled cold rolled steel begins with hot-rolled steel coils, which are first descaled through an acid bath (typically hydrochloric or sulfuric acid). This pickling process eliminates mill scale and prepares the surface for subsequent cold rolling. The steel is then passed through a series of rollers at room temperature, which reduces its thickness and improves its mechanical properties. Cold rolling aligns the steel's grain structure, increasing its strength and hardness while maintaining ductility. The final product exhibits a smooth, matte finish with precise thickness control, often ranging from 0.3mm to 3mm. Some variants may undergo additional processes like annealing or skin-pass rolling to further enhance their characteristics.
Key Features
Pickled cold rolled steel stands out for its exceptional surface quality, free from pits and scale, which is crucial for painting or plating applications. Its dimensional accuracy is superior to hot-rolled steel, with thickness tolerances as tight as ±0.02mm. The material also offers excellent formability, allowing for deep drawing and complex shaping without cracking. Mechanically, it provides higher yield and tensile strength compared to hot-rolled equivalents, typically ranging between 280-550 MPa depending on the grade. The absence of scale and uniform surface make it ideal for precision components where appearance matters, such as automotive body panels or high-end appliances.
Application Areas
The automotive industry is the largest consumer of pickled cold rolled steel, using it for body panels, chassis components, and structural parts due to its strength-to-weight ratio. Appliance manufacturers utilize it for washing machine drums, refrigerator panels, and oven cavities where smooth surfaces and formability are essential. In construction, it's used for roofing, wall cladding, and framing systems, often in galvanized or painted forms. Other applications include electrical enclosures, furniture frames, and metal containers. The material's versatility also extends to industrial equipment where precise dimensions and reliable performance are required.
Maintenance and Precautions
While pickled cold rolled steel has good inherent corrosion resistance, unprotected surfaces will rust when exposed to moisture. Proper storage in dry, covered areas is essential, with relative humidity preferably below 60%. Stacking should be done with protective separators to prevent surface damage. During handling, use clean gloves to avoid fingerprint corrosion and lift with care to prevent edge damage. For long-term protection, consider oiling or applying temporary rust preventatives. When welding, ensure proper ventilation as some surface treatments may emit fumes. Regular inspection for white rust (especially in humid conditions) is recommended for stored materials.
B2B Procurement Guide
When sourcing pickled cold rolled steel, specify your requirements clearly: material grade (e.g., SPCC, DC01), thickness tolerance, width, surface finish (e.g., matte, bright), and mechanical properties. Request mill test certificates to verify compliance with standards like ASTM A1008 or JIS G3141. Consider ordering in coil form for large-volume production to minimize waste, or pre-cut sheets for smaller operations. Lead times typically range from 2-8 weeks depending on specifications and supplier inventory. For reference, prices fluctuate with raw material costs but commonly range between $600-$900 per ton. Establish long-term contracts with reputable mills or distributors to ensure consistent quality and stable pricing.
Related Manufacturers
- 主营：彩钢板、中厚板、彩钢卷、造船板、彩涂卷、桥梁钢板、彩涂钢板、船用钢板、锅炉容器板、拉森钢板桩、彩钢压型板、压力容器板
- 主营：电镀锌、正品卷、加强件、冷轧铁、冷轧钢、冷轧卷、酸洗卷、轧酸洗、冷轧板、高强钢、钢结构、镀锌卷、深冲钢、车门板、低合金、热镀锌、硬化钢、钢板卷、马氏体、板卷材、汽车钢、碳素钢、平分条、双相钢、冲压料
- 主营：汽车钢、汽车冲压板、汽车门锁用料、冷轧板、冷轧卷、酸洗板卷、冷轧钢板、冷轧碳酸结构钢、电力机柜专用板
- 主营：DT4E、DT4C、SAE1074、冷轧钢板、热轧酸洗钢板、C75S、C55E、20MnB5、SNCM220、C100S、SCM415、SCM435、4j36、SKS51、SK4、SK7、精冲钢、SS716、95CR15、M3、40CRMOVN、631、7C27MO2、100Cr6、DD11
- 主营：旋叶片、热轧机、开卷机、扁钢冷轧机、拉丝机、辊轧机、放线机、收线机、调直机、拔丝机、叶片机、钢轧机、碳钢螺旋、合金轧机、扁铁设备、收线设备、绞龙叶片、扁钢设备、加厚螺旋、钢筋轧机、叶片设备、轧钢设备、蛟龙叶片、板材轧机、立轧设备、金属轧机
- 主营：合金管s、不锈钢管、哈氏合金管
- 主营：SPHC冷轧板、铜板铜管、铝合金铝卷、热轧不锈钢板
- 主营：无缝管、c22钢板、inconel625、不锈钢板、钢板检测、圆棒切割、哈氏合金、光亮圆棒、钢板切割、弯头标准、无缝钢管、合金b3钢板、不锈钢锻造、不锈钢圆棒、耐高温钢板、高温合金钢板、合金钢管工艺、钢板固溶时效、镍基合金钢板、带颈对焊法兰、耐高温合金板、对焊法兰标准、合金光亮圆钢、钢耐高温铸件、合金钢板复合
- 主营：两辊轧机、二辊轧机、扁钢轧机、冷轧机、冷轧带肋钢筋设备、螺旋叶片冷轧机、扁铁轧机、扁线轧机、三辊轧机、四辊轧机、板材轧机、线材轧机、棒材轧机、异形钢轧机、螺纹钢轧机、带肋钢筋轧机、螺旋叶片成型机、拉丝机、拔丝机、砂带除锈机、工字轮收线机、钢筋收线机、调直切断机、圆管缩尖机
- 主营：钛合金管、304螺纹钢、630不锈钢、冷轧板、高温合金棒、哈氏合金棒、不锈钢圆钢、不锈钢螺纹钢
- 主营：镀锌卷、镀锌板、镀锌板价格、冷轧卷、冷轧板、冷轧板价格、酸洗卷、酸洗板、酸洗板价格、热轧酸洗卷、酸洗汽车钢、镀铝板、镀铝卷、锌铁合金板、锌铁合金卷、船板、镀铝锌板、镀铝镁锌板、镀铝镁锌卷、汽车钢、热轧卷、热轧板、热轧、镀铝锌卷
- 主营：冲压冷板、镀锌板卷、275克锌铝镁板、冷轧卷、正品冷轧余卷、冷轧卷板、冷轧盒板ST12、鞍钢冷轧盒板、酸洗钢板、酸洗板、酸洗钢卷、高强汽车酸洗钢、冷成型RECC、冷板SPCC、镀锌板、镀锌卷板、镀锌钢卷、镀铝锌钢板、镀铝锌卷板、敷铝锌板、热轧钢板Q235B、热轧锰板Q355B、锌铝镁板、XG800中厚钢板、纯铝板铝棒
- 主营：精冲钢、合金钢、弹簧钢、酸洗板、高碳钢、低碳钢、中碳钢、工具钢、刀具钢、汽车钢
- 主营：冷轧卷、不涂油冷轧板卷、冷轧钢带
- 主营：无取向电工钢、取向电工钢、普冷、酸洗、镀锌、彩涂、热轧
- 主营：不锈钢管、不锈钢板、不锈钢热轧板、不锈钢冷轧板、不锈钢无缝管、不锈钢装饰板、不锈钢花纹板、不锈钢天沟、不锈钢角钢、不锈钢槽钢、不锈钢工字钢、不锈钢扁钢、不锈钢方管、不锈钢圆管