Aicaigou LogoB2B WikiIndustrial Encyclopedia

PIC10F200T

Updated: 2026-08-16

Overview

The PIC10F200T is an 8-bit microcontroller from Microchip Technology's PIC10 family, designed for cost-sensitive and space-constrained applications. With a 6-pin SOT-23 package, it integrates 256 words of Flash program memory, 16 bytes of RAM, and a 4 MHz internal oscillator. Its minimalist design makes it suitable for basic control tasks in consumer electronics, such as remote controls, LED drivers, and sensor interfaces. Despite its limited resources, the PIC10F200T supports essential peripherals like a watchdog timer and a comparator, enabling reliable operation in low-complexity systems. It operates within a voltage range of 2.0V to 5.5V, accommodating battery-powered devices. The microcontroller is programmed using Microchip's MPLAB X IDE, with assembly or C language options.

Structure and Working Principle

PIC10F200T-I/OT 8位MCU单片机 MICROCHIP 批次25+北京宏信腾达电子科技有限公司

The PIC10F200T follows a Harvard architecture, separating program and data memory for efficient execution. Its core includes an 8-bit ALU, a hardware stack for subroutine handling, and a reduced instruction set (35 instructions). The device lacks an external crystal oscillator, relying instead on an internal 4 MHz RC oscillator with ±1% accuracy. I/O functionality is provided via three configurable pins (GP0, GP1, GP2), which can serve as digital inputs, outputs, or analog comparator inputs. The microcontroller executes one instruction per clock cycle (except branches), achieving a throughput of 1 MIPS at 4 MHz. Power-saving modes, such as SLEEP, reduce consumption to below 1 µA, extending battery life in portable applications.

商家经验真实案例 · 安全可信
7900xtx功耗解析
本文全面解析7900xtx显卡的功耗表现与发售时间,从架构设计到实际应用场景的能耗分析,并介绍其市场定位与发布时间背景,为硬件爱好者提供实用参考。

Key Features

The PIC10F200T's standout features include its ultra-compact 6-pin package, which minimizes PCB footprint, and its low power consumption (typically 50 µA/MHz in active mode). The integrated 4 MHz oscillator eliminates the need for external timing components, further reducing system cost. Other notable features include a precision internal oscillator (calibrated at 4 MHz), a power-on reset circuit, and a watchdog timer for fault recovery. The comparator module enables simple analog signal processing, while the GPIO pins support weak pull-ups and interrupt-on-change functionality. These attributes make the device versatile for applications like button debouncing, capacitive sensing, and low-speed signal monitoring.

Application Areas

The PIC10F200T is widely deployed in high-volume, low-complexity applications. Common uses include appliance control (e.g., toasters, coffee makers), where it manages basic timing and user interface functions. It is also found in LED lighting systems for PWM dimming and color control. In industrial settings, the microcontroller serves as a low-cost logic replacement in sensors, actuators, and safety interlocks. Its energy efficiency suits battery-powered IoT edge devices, such as wireless sensor nodes or RFID tags. Additionally, hobbyists favor the PIC10F200T for educational projects due to its simplicity and compatibility with Microchip's development ecosystem.

Maintenance and Precautions

PIC10F200T-I/OT 8位MCU单片机 MICROCHIP 微芯 封装06LSOT-23 批次22+深圳市春林微电子科技有限公司

To ensure longevity, avoid exposing the PIC10F200T to voltages beyond its specified range (2.0V–5.5V). Electrostatic discharge (ESD) protection measures, such as grounded workstations, are recommended during handling. For firmware updates, use verified programming tools (e.g., PICkit™ 3) to prevent corruption of Flash memory. In designs with inductive loads, incorporate flyback diodes to protect GPIO pins from voltage spikes. Debugging may require external pull-up/pull-down resistors if internal options are insufficient. Regularly monitor supply voltage in battery-operated systems, as brown-out reset functionality is not included in this model.

商家经验真实案例 · 安全可信
PIC16F526工作原理
本文深入浅出地解析PIC16F526微控制器的工作原理,包括其核心架构、指令执行流程以及典型应用场景,帮助读者快速掌握这款8位MCU的运作机制。

B2B Procurement Guide

When sourcing the PIC10F200T, prioritize authorized distributors (e.g., Digi-Key, Mouser) to guarantee authenticity. Bulk purchases (1,000+ units) typically reduce per-unit costs by 20–30%. Lead times vary; allocate 6–8 weeks for non-stock orders during semiconductor shortages. Evaluate alternatives like the PIC10F202 (additional GPIO) or PIC12F509 (more memory) if project requirements evolve. Request samples for prototyping, and confirm compatibility with existing toolchains. For long-term projects, secure lifetime-buy commitments or identify drop-in replacements to mitigate obsolescence risks.

Related Manufacturers