Phosphogypsum
Overview
Phosphogypsum is an industrial byproduct generated during wet-process phosphoric acid production, with approximately 5 tons produced per ton of phosphoric acid. Its primary component is calcium sulfate dihydrate (CaSO4·2H2O), though it typically contains impurities including residual acids, fluoride compounds, and trace radioactive elements from phosphate rock. Globally, approximately 200-300 million tons are produced annually, with only 15% currently reused due to processing challenges. The material's composition varies based on phosphate ore source and processing methods. While chemically similar to natural gypsum, phosphogypsum often requires treatment before industrial applications due to its variable purity and potential environmental concerns. The U.S. EPA regulates its use in construction due to radioactivity concerns.
Physical and Chemical Properties
Phosphogypsum exhibits properties similar to natural gypsum but with key deviations. Its crystalline structure typically shows smaller, irregular crystals compared to mined gypsum, affecting compaction and handling characteristics. The material commonly contains 18-22% chemically bound water, which is released upon heating above 100°C. Bulk density ranges from 1,200-1,500 kg/m³ when loosely packed. Chemical impurities include 0.5-5% residual phosphoric acid, 1-3% fluorine compounds, and trace metals (cadmium, arsenic). pH values typically range from 1.5-4.5 in fresh material but stabilize near neutral after weathering. Radioactivity levels vary significantly by origin, with radium-226 content ranging 10-1,000 pCi/g. These variables necessitate batch testing for specific applications.
Main Applications
The construction sector accounts for 70% of phosphogypsum utilization, primarily in wallboard (after purification), cement retarders, and road base materials. In agriculture, it serves as a calcium and sulfur amendment for alkaline soils and a source of phosphate in acidic soils. Emerging uses include rare earth element recovery and filler in polymer composites. Industrial applications leverage its sulfate content for sulfuric acid production and wastewater treatment. Notably, China mandates 95% utilization in some regions for construction materials, while other countries restrict usage due to radioactivity concerns. Ongoing research focuses on converting phosphogypsum into high-purity precipitated calcium carbonate (PCC) and other value-added chemicals.
Safety and Storage
Storage requires careful management due to environmental risks. Unlined stockpiles may leach acidic runoff containing fluorine and heavy metals, requiring containment systems with pH monitoring. Long-term stacks should incorporate impermeable liners and drainage collection systems. Dust suppression measures (humidification, windbreaks) are essential during handling. Personnel handling raw phosphogypsum should use PPE including N95 respirators, gloves, and protective eyewear. Facilities must monitor airborne dust concentrations (TLV 10 mg/m³ for inert dust) and implement vapor suppression for acidic varieties. Regulatory thresholds for radioactivity (e.g., <10 pCi/g Ra-226 in U.S. building materials) dictate allowable uses.
B2B Procurement Guide
Industrial buyers should specify several key parameters: radioactivity levels (require test reports for Ra-226, Pb-210), acid-soluble impurity content (P2O5, F), and moisture content (affects transport costs). Bulk pricing follows volume discounts but factor in transportation—material is typically economically viable within 200 km of production sites. Quality certifications to request include ISO 9001 for processing facilities and radiological safety documentation. For construction applications, verify compliance with local building codes regarding phosphogypsum usage. Sample testing should cover compressive strength (≥2 MPa for road base), setting time (for cement applications), and leachate analysis for environmental safety.
Related Manufacturers
- 主营:--
- 主营:--
- 主营:净味腻子粉、2型聚合物防水砂浆、1型聚合物防水砂浆、磷石膏、轻质抹灰石膏、腻子粉、轻质抹灰石膏砂浆、ALC墙板粘结剂、ALC板专用粘合剂、ALC墙板粘结砂浆、石膏基自流平、无味腻子粉、净味耐水腻子粉、玻化微珠保温砂浆、外墙抗裂柔性因子、双组份防水砂浆、二型防水砂浆、隔音砂浆
- 主营:腻子粉、粘结砂浆、抗裂砂浆、建筑砌筑用磷石膏、粉刷石膏、抹灰砂浆、瓷砖粘结剂、轻质抹灰石膏、耐水干粉腻子、界面剂、天然石粉、内墙防裂找平、加气混凝土墙、住宅边坡防护、速凝喷射混凝土、湿式喷射混凝土、轻质墙体找平材料、多功能瓷砖粘结剂、强力地砖胶、新俊杰建材、灌浆修补料、水泥防水砂浆、地砖瓷砖粘结剂、新俊杰粉刷石膏、薄层抹灰石膏
- 主营:处理剂、滑石粉、真石漆、磷石膏、腻子粉、乳胶漆、粘合剂、瓷砖胶、自流平、涂料水泥、抗裂砂浆、保温砂浆、建筑胶水、防水砂浆、抹灰石膏、防火涂料、砌筑材料、粉刷石膏、贴砖辅料、石膏砂浆、保温一体板、功能性涂料、瓷砖粘结剂、回弹增强剂、瓷砖粘接剂、粘结用涂料
- 主营:水泥稳定磷石膏、冷再生机、水泥撒布车
- 主营:耐火墙材、抹灰砂浆、石膏基自流平、墙体施工、磷石膏砌块、防潮石膏砌块、环保石膏砌块
- 主营:稳定土搅拌站、混凝土搅拌站、水稳拌合站、磷石膏专用拌合站、水泥仓、水稳料搅拌站
- 主营:加剂瓷砖胶、快速修补料、轻质抹灰石膏、磷石膏、无收缩灌浆料、绿色金刚砂地坪、路面修补料、水泥路面修补料、轻质石膏抹灰、粉刷石膏、水泥基灌浆料、灌浆料、工业灌浆料、建筑灌浆料、面层抹灰石膏、抗裂抹灰石膏、瓷砖胶、金刚砂地坪、金刚砂骨料、水泥道路快速修补料、高强无收缩灌浆料、混凝土修补灌浆料、轻质石膏砂浆、石膏抹灰砂浆、轻质石膏、抹灰石膏
- 主营:耐火浇注料、酸性炉衬材料、高效除渣剂、磷石膏、铝矾土高铝细粉、石墨化增碳剂、透热炉打结料、线圈胶泥、中性炉衬材料、导电粉、中间包可塑料、打炉料、干振料、刚玉炉衬料、硅藻土、电气石托玛琳粉、膨润土、重晶石硫酸钡粉、蛭石、高岭土、橡胶颗粒粉、石英沙石英粉、绿泥白泥修补料、凹凸棒土、重质轻质碳酸钙、雨花石炉料
- 主营:聚天冬氨酸、亚氨基二琥珀酸、谷氨酸二乙酸四钠、磷石膏、GLDA、甲基甘氨酸二乙酸、MGDA、IDS、聚天冬氨酸钠、聚天冬氨酸锌、螯合剂、络合剂、PASP-Na
- 主营:去锈剂、除锈液、处理剂、磷化液、脱漆剂、退塑剂、絮凝剂、免除油、松动剂、铝合金、引气剂、消泡粉、抑泡剂、渗透剂、发黑液、凝聚剂、脱漆水、去漆剂、防水剂、消除剂、消泡剂、氧化皮、超声波、混凝土、脱脂剂
- 主营:水泥毯复合土工膜、土工膜、长丝土工布、磷石膏、短丝土工布、复合排水网、水泥毯、防草布、排水板、防汛沙袋、膨润土防水毯、A20水土保护毯、高端水泥毯、土工格室、土工格栅、水泥毯设备、三维复合排水网
- 主营:水稳拌合站、水稳拌和设备、混凝土搅拌站、磷石膏处理设备、混凝土搅拌机、稳定土厂拌设备、冷再生厂拌设备、小型移动拌和站、稳定土拌合站
- 主营:干粉砂浆生产线、腻子粉生产线、石膏砂浆生产线、磷石膏、预拌砂浆生产线、灌浆料设备、瓷砖胶设备、保温砂浆设备、沙子烘干机、砂浆包装机、定量包装机、库底散装机、脉冲除尘器
- 主营:无机保温砂浆、环氧地坪漆、塑胶篮球场、磷石膏砌块、轻质抹灰磷石膏砂浆、磷石膏厂家、人工草坪、PVC塑胶地板、人造草坪、塑胶跑道
- 主营:硫酸钙、透明粉、石膏粉、磷石膏、硅微粉、石膏颗粒、玻璃粉、滑石粉、石英粉、纤维石膏、石膏块、食用硫酸钙、食用石膏粉
- 主营:磷石膏、保护剂
- 主营:菱镁改性剂、水泥增强剂、石膏发泡剂、磷石膏、石膏增强剂、建筑防水剂、水性脱模剂、水泥发泡剂、石膏防水剂、石膏脱模剂、硫镁改性剂、水泥防水剂、水泥脱模剂
