Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

Phenolphthalein Blue Indicator Solution

Updated: 2026-07-21

Overview

Phenolphthalein Indicator Solution is a staple in analytical chemistry, primarily used to detect pH changes in acid-base reactions. Developed in the late 19th century, this organic compound exhibits a clear color transition from colorless (acidic/neutral pH) to vivid pink (basic pH) between pH 8.3-10.0. Its reliability and sharp endpoint make it ideal for titration experiments in educational, pharmaceutical, and industrial laboratories. The solution is typically prepared by dissolving phenolphthalein powder in ethanol or a water-alcohol mixture at concentrations ranging from 0.5% to 1%. Modern formulations may include stabilizers to prolong shelf life. While largely replaced by digital pH meters in some applications, it remains essential for teaching fundamental chemistry concepts and quick visual pH assessments.

Physical and Chemical Properties

百里香酚酞指示剂 0.1% 麝香草酚酞络合指示液荆州市尹杰化工有限公司

Phenolphthalein's molecular structure (C20H14O4) features three aromatic rings connected by a central carbon atom, with hydroxyl groups that protonate/deprotonate during pH changes. In solution, it appears colorless when protonated (acidic) and turns pink upon deprotonation (basic). The transition occurs due to structural rearrangement that creates a conjugated system absorbing visible light at 553 nm. Key physical properties include moderate solubility in polar organic solvents (50 g/L in ethanol) but limited water solubility (0.4 g/L). The indicator is thermally stable below 250°C but decomposes at higher temperatures. Its color change is reversible, though prolonged exposure to strong bases may cause fading due to further chemical reactions. Commercial solutions often include pH buffers to sharpen the transition range.

商家经验真实案例 · 安全可信
人工饲养的麝能喂黄豆粒吗
本文探讨人工饲养麝时是否适宜投喂黄豆粒,分析黄豆的营养价值、麝的消化特点及可能存在的风险,为养殖者提供科学的喂养建议。

Main Applications

The primary use of Phenolphthalein Indicator Solution is in volumetric analysis, particularly for strong acid-strong base titrations where the pH endpoint falls within its transition range (8.3-10.0). It's standard in chemistry curricula worldwide for teaching titration techniques. Industrial applications include water treatment monitoring, soap manufacturing quality control, and pharmaceutical purity testing. In construction, diluted solutions help identify alkaline conditions in concrete (carbonation testing). Forensic labs utilize its color change to detect bloodstains (Kastle-Meyer test). Historically, it served as a laxative, though this medical use was discontinued due to safety concerns. Modern alternatives like bromothymol blue are preferred for titrations outside phenolphthalein's optimal pH range.

Safety and Storage

谱析 标准溶液 四溴酚酞乙酯钾指示液 分析试剂北京谱析科技有限公司

While dilute indicator solutions pose minimal risk, concentrated phenolphthalein is classified as an irritant (GHS05) and suspected carcinogen (GHS08). Always use personal protective equipment (gloves, goggles) when handling. Skin contact requires immediate washing with soap and water; eye exposure necessitates 15 minutes of irrigation. Store solutions in amber glass or opaque plastic containers at room temperature, protected from light and extreme temperatures. Shelf life typically ranges from 1-3 years when properly stored. Discard discolored or precipitated solutions. For disposal, small quantities can be neutralized and poured down the drain with excess water; bulk amounts require hazardous waste management in accordance with local regulations.

商家经验真实案例 · 安全可信
室间质评和室内质控区别
本文解析实验室质量管理中室间质评与室内质控的核心差异,从实施范围、评价对象到功能定位进行对比,帮助读者建立清晰的质量管理认知框架。

B2B Procurement Guide

When procuring Phenolphthalein Indicator Solution commercially, specify concentration (usually 0.5% or 1%), solvent type (commonly ethanol), and packaging requirements (100mL to 5L containers). Reputable suppliers provide certificates of analysis including pH transition range verification. Bulk purchases (20L+) may reduce costs by 15-30%. Key procurement considerations include: verifying compliance with relevant standards (e.g., ASTM E394 for titration indicators), checking for stabilizers that extend usability, and confirming appropriate hazard documentation (SDS). Some manufacturers offer custom formulations with mixed indicators for specific titration needs. Lead times vary from 1-4 weeks for specialty orders, with standard solutions typically available ex-stock from laboratory chemical distributors.

Related Manufacturers