Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

PCA8574AN

Updated: 2026-08-07

Overview

The PCA8574AN is a popular I2C interface I/O expander IC developed by NXP Semiconductors. This 8-bit input/output port expander allows microcontrollers with limited GPIO pins to control multiple devices through the two-wire I2C bus. The device operates within a wide voltage range of 2.5V to 5.5V, making it compatible with various logic levels. As a CMOS device, the PCA8574AN features extremely low power consumption, typically drawing just 2.5μA in standby mode. Its simple I2C interface requires only two microcontroller pins (SCL and SDA) to control all eight I/O ports, significantly reducing wiring complexity in embedded systems.

Structure and Working Principle

NX 代理 PCA8574AN 电源管理芯片 微处理转换器 存储IC 20+深圳羚行科技有限公司

The PCA8574AN consists of an 8-bit quasi-bidirectional I/O port, I2C-bus interface, and interrupt logic. Each I/O pin can be independently configured as input or output through simple I2C commands. The quasi-bidirectional architecture eliminates the need for direction control registers, simplifying software implementation. When operating, the master microcontroller communicates with the PCA8574AN through the I2C protocol at speeds up to 400kHz. The device features three hardware address pins (A0-A2), allowing up to eight PCA8574AN chips to coexist on the same I2C bus. An open-drain interrupt output pin signals the microcontroller when any input pin changes state, enabling efficient event-driven designs.

商家经验真实案例 · 安全可信
电源管理芯片解析
本文深入浅出地解析了电源管理IC芯片的基本概念、核心功能及应用场景,帮助读者快速理解这类电子设备中的‘能量管家’如何工作,以及为何它对现代电子产品至关重要。

Key Features

The PCA8574AN's most notable feature is its simplicity - requiring minimal external components while providing reliable I/O expansion. Its quasi-bidirectional ports automatically configure themselves as inputs or outputs based on the signal being driven, eliminating complex initialization routines. Other significant features include 25mA sink capability per I/O pin (useful for driving LEDs directly), latch-up performance exceeding 100mA per JESD78 standard, and ESD protection up to 2000V HBM. The device operates across industrial temperature ranges (-40°C to +85°C) and is available in both DIP and SOIC packages for prototyping and production applications.

Application Areas

This I/O expander finds widespread use in industrial control panels, where it helps manage multiple sensors, switches, and indicators without burdening the main controller. In consumer electronics, it's commonly used in smart home devices, appliances, and gaming peripherals for button matrix scanning and LED control. The PCA8574AN is particularly valuable in space-constrained designs like wearable devices and IoT modules, where PCB real estate is limited. Its interrupt capability makes it ideal for battery-powered applications needing to wake the main controller only when input changes occur, significantly extending battery life in wireless sensor nodes and remote controls.

Maintenance and Precautions

NX 代理 PCF2123U 电源管理开关 微处理控制器 单片机深圳羚行科技有限公司

While robust, the PCA8574AN requires proper handling to ensure reliable operation. Always observe ESD precautions during installation, using grounded workstations and wrist straps. The I2C bus lines should include appropriate pull-up resistors (typically 4.7kΩ for standard mode) located near the master controller. For systems with long I2C bus runs or multiple devices, consider using bus buffers to maintain signal integrity. When driving inductive loads (like relays), add flyback diodes to protect the I/O pins. Ensure power supply decoupling with a 100nF ceramic capacitor placed close to the VCC pin, especially in electrically noisy environments.

商家经验真实案例 · 安全可信
电子元件wt.代表什么
本文解析电子元件中'wt.'的常见含义,包括重量单位、特殊型号标识等可能场景,并说明如何通过上下文判断其具体指代,帮助读者快速理解技术文档中的缩写。

B2B Procurement Guide

When sourcing PCA8574AN in volume, verify the manufacturer's authenticity through authorized distributors, as counterfeit semiconductors are common in the market. Consider lead time variations between DIP (N packages) and SOIC (D packages) versions, with surface-mount typically having better availability. For prototype quantities, reputable distributors like Digi-Key, Mouser, or local authorized partners are recommended. For production volumes exceeding 1,000 units, direct engagement with NXP or their franchised distributors can yield better pricing. Always request manufacturer date codes to avoid obsolete stock, and consider alternative part numbers like PCA8574APW (TSSOP package) if supply chain issues arise.

Related Manufacturers