Overview
The PC817SC is a photocoupler (or optocoupler) that electrically isolates circuits while transmitting signals via infrared light. It consists of an LED and a phototransistor housed in a compact DIP-4 package. This device is widely adopted in industrial and consumer electronics due to its reliability, cost-effectiveness, and compliance with safety standards. Developed by Sharp and later produced by multiple manufacturers, the PC817SC is a de facto standard for low-to-medium-speed signal isolation. It is commonly used in power supplies, PLCs, and communication interfaces to prevent ground loops and suppress noise.
Structure and Working Principle
The PC817SC integrates an infrared LED optically coupled to a silicon phototransistor. When current flows through the LED, it emits light that activates the phototransistor, creating a conductive path between its collector and emitter. This optical barrier ensures galvanic isolation between input and output, with a typical isolation voltage of 5kV. The device operates in a linear or switching mode, depending on the application. Key parameters include the Current Transfer Ratio (CTR), which defines the efficiency of signal transmission, and response time (typically 3–18μs), critical for high-speed applications.
Key Features
The PC817SC offers several advantages: high isolation voltage (5kV RMS for 1 minute), compact DIP-4 package for easy PCB mounting, and low power consumption. Its CTR ranges from 50% to 600%, allowing flexibility in circuit design. Additional features include a wide operating temperature range (–30°C to +100°C) and compliance with international safety standards (e.g., UL, cUL). These traits make it suitable for harsh industrial environments and safety-critical applications.
Application Areas
Primary applications include power supply feedback loops, where it isolates control circuits from high-voltage outputs. It is also used in PLCs, motor drives, and medical equipment to ensure signal integrity and user safety. Other uses encompass telecommunications (modem isolation), automotive electronics (battery management systems), and home appliances (inverter controls). Its versatility stems from its ability to bridge circuits with different ground potentials or voltage levels.
Maintenance and Precautions
To ensure longevity, avoid exceeding the maximum forward current (50mA) or reverse voltage (6V) of the LED. Solder the device at temperatures below 260°C for ≤10 seconds to prevent damage to the plastic housing. Storage conditions should be dry (humidity <70%) and within –40°C to +100°C. Electrostatic discharge (ESD) precautions are recommended during handling to protect the phototransistor.
B2B Procurement Guide
When sourcing PC817SC, verify manufacturer certifications (e.g., ISO 9001) and batch consistency, as CTR may vary. Consider alternatives like the LTV-817 or EL817 for compatibility checks. Bulk purchases (1,000+ units) typically reduce costs by 20–30%. Lead times vary; stock is commonly available from distributors like Digi-Key or Mouser. For custom requirements (e.g., tape-and-reel packaging), confirm minimum order quantities (MOQs).
Related Manufacturers
- 主营：mos管、LED红外接收发射管、WIFI模块、4G模块、发光二极管、贴片二极管、瑞煜芯片、二极管、IGBT、三极管、场效应管、低功耗芯片模块、物联网模块、蓝牙模块、贴片三极管、无线模块、肖特基二极管、4g cat4、海思芯片、光耦、碳化硅SIC
- 主营：二三极管、场效应管、桥堆、光耦、IC、保险丝、可控硅、贴片安规电容、扬杰IGBT、贴片压敏电阻、贴片Y电容
- 主营：晶体管光耦、槽型/反射式光电开关
- 主营：RUBYCON电解电容、MOSFET、二极管
- 主营：晶闸管、低压降、二极管、稳压管、晶体管、锂电池、收发器、fsw25n50a、整流管、放大管、整流桥、开关管、mbr3045pt、三极管、to-252 nm、肖特基、mos管场、玻璃管、大芯片、可控硅、mur1020fct、mur2060fct、mur1060fct、mbr30100pt、mur1040fct
- 主营：集成电路IC、MOS管、二三极管、功放IC、驱动IC、电解电容、电源芯片、继电器、单片机、光耦、三端稳压、可控硅、锂电池充电芯片、USB、数码管