Overview
Ozone transfer is the process of dissolving ozone gas (O₃) into liquids, primarily water, to leverage its powerful oxidation capabilities. This technology is fundamental in industries requiring advanced oxidation processes, as ozone is 50% more potent than chlorine as a disinfectant. Unlike storage chemicals, ozone is generated on-site using corona discharge or UV light systems, then immediately transferred to the target liquid through diffusers, venturi injectors, or packed columns. The efficiency of this transfer process directly impacts treatment effectiveness and operational costs.
Physical and Chemical Properties
Ozone's low solubility in water (about 13 times less than chlorine) makes efficient transfer systems crucial. Henry's Law constants for ozone range from 74-130 atm·L/mol depending on temperature, requiring precise pressure and temperature control. The gas decomposes rapidly in water (half-life of 20-30 minutes at 20°C), with decomposition accelerating at higher pH levels. This instability necessitates continuous generation and transfer during operations. Mass transfer rates are optimized through bubble size reduction (microbubbles <50µm achieve 90% transfer efficiency versus 10-15% for coarse bubbles).
Main Applications
Water treatment plants use ozone transfer for pathogen inactivation (CT values of 0.1-0.5 mg·min/L for 99% virus reduction), taste/odor control, and micropollutant degradation. In food processing, it extends shelf life by reducing microbial loads on produce and packaging materials. Industrial applications include textile bleaching (replacing chlorine), pharmaceutical wastewater treatment (breaking down complex organics), and semiconductor cleaning (ultrapure water production). Emerging uses include ballast water treatment and swimming pool sanitation systems that minimize chlorinated byproducts.
Safety and Storage
Ozone generators require strict safety protocols as workplace exposure limits are 0.1 ppm (8-hour TWA) per OSHA. Gas detectors should be installed where concentrations could exceed 0.05 ppm. Closed-loop transfer systems with destruct units are mandatory for industrial applications. Materials of construction must resist oxidation - 316L stainless steel, PVDF, and PTFE are common. Never store ozone gas; generation should match real-time demand. Residual ozone in off-gases must be catalytically converted to oxygen before release (typically using manganese dioxide catalysts at 30-50°C).
B2B Procurement Guide
Industrial ozone transfer systems are specified by gas production capacity (gO₃/hr) and transfer efficiency (% absorption). Standard ranges are 50g-50kg/hr for water treatment, with turnkey systems including generators, contact chambers, and monitoring controls. Key procurement considerations include: oxygen vs air feed systems (oxygen-fed yield 8-12% concentration vs 1-4% for air), energy consumption (8-18 kWh/kgO₃), and mass transfer technology (venturi systems suit 100-500 g/hr flows while packed towers handle >1kg/hr). Pilot testing is recommended for custom applications.
Related Manufacturers
- 主营：烘焙设备、商用冰箱、咖啡机、臭氧消毒柜、制冰机、和面机、洗碗机、蒸饭柜、消毒柜
- 主营：饮料生产线、小型饮料生产线、果酒生产线、果醋生产线、酵素生产线、番茄生产线、番茄酱生产线、菠萝生产线、饮料生产线设备、中小试饮料生产线、中小试乳品生产线、超高温杀菌机、UHT杀菌机、超高温瞬时杀菌机、小型果汁生产线、椰奶生产线、果汁生产线、苹果汁生产线、柑橘橙汁饮料生产线、食品实验室实训设备、沙棘汁生产线、枸杞生产线
- 主营：消毒柜、空气净化器、制氧机、便携式臭氧机、多功能移动式臭氧发生器、高浓度臭氧发生器、臭氧水机、臭氧消毒柜、热风循环烘干消毒柜
- 主营：过滤器、卫生电子、无尘车间、净化传递窗、电子消防、医用控制、风量调节阀、空气进化器、不锈钢对夹、喷塑回风口、双人洗手池、百叶回风口、不锈钢鞋柜、不锈钢更衣柜、不锈钢回风口、不锈钢电控柜、碳钢喷塑手动、不锈钢风淋室、不锈钢洗手池
- 主营：激光清障仪、电力检测仪、听漏仪、724臭氧传递标准、剂量计、放疗仪、能谱仪、粉尘仪、测量仪、离子计、测定仪、传感器、计数器、风压计、流量计、监测器、定位仪、欧姆表、光量计、放大镜、色度仪、巡检仪、变压器、反射仪、测试仪、露点仪
- 主营：紫外线消毒器、中压紫外线、污水紫外线消毒器、臭氧发生器、水箱自洁消毒器、非透明液体紫外线消毒器
- 主营：臭氧除臭机、多功能臭氧机、活氧机、空气净化器
- 主营：负压称量罩、单机除尘器、风淋室、无尘车间、货淋室、脉冲除尘器
- 主营：蒸馏水机、紫外线消毒设备、AOT光催化灭菌设备、臭氧发生器、臭氧灭菌柜、臭氧消毒机、高浓度臭氧水机、AOP高级氧化水体净化设备、羟基自由基发生器、水箱自洁消毒器、明渠紫外线消毒模块、紫外线消毒灯、多效流管蒸馏水机、重力式全自动曝气精滤机、多效列管蒸馏水机、硅磷晶硅磷晶罐、泳池消毒设备