Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

OPA241UA

Updated: 2026-07-19

Overview

The OPA241UA is a precision operational amplifier (op-amp) designed for applications requiring high accuracy and low power consumption. Manufactured by Texas Instruments, it is part of a family of op-amps optimized for low-noise performance in sensitive electronic circuits. It is commonly used in medical instrumentation, industrial sensors, and test equipment where signal integrity is critical. The device operates over a wide supply voltage range and features rail-to-rail output swing, making it versatile for various analog designs.

Structure and Working Principle

SNJ54CDC586WD 电子元器件 TI 封装CFP 批次2024+深圳市康飞半导体有限公司

The OPA241UA integrates a differential input stage, gain stage, and output buffer in a single monolithic IC. It amplifies the voltage difference between its input pins while rejecting common-mode signals. The internal architecture uses bipolar and CMOS transistors to achieve low input bias current and high open-loop gain. The rail-to-rail output stage allows the amplified signal to approach the supply voltages, maximizing dynamic range in low-voltage systems.

商家经验真实案例 · 安全可信
5060ti和5070性能差距
本文详细比较5060ti和5070的性能差异,包括核心参数、实际应用表现以及选购建议,帮助读者根据需求做出合理选择。

Key Features

With a typical noise density of 8nV/√Hz at 1kHz, the OPA241UA excels in low-noise applications. Its quiescent current of 475μA per amplifier makes it suitable for battery-powered devices. The device offers a gain bandwidth product of 1MHz and a slew rate of 0.4V/μs, balanced for precision rather than high-speed applications. Its input offset voltage is typically 150μV, with temperature drift below 1μV/°C, ensuring stable performance across varying environmental conditions.

Application Areas

In medical technology, the OPA241UA is used in patient monitoring equipment, ECG amplifiers, and portable diagnostic devices. Its low noise characteristics preserve signal fidelity in these sensitive applications. Industrial uses include process control sensors, weigh scales, and precision current measurement circuits. The amplifier also finds application in scientific instrumentation such as spectrophotometers and data acquisition systems where signal accuracy is paramount.

Maintenance and Precautions

Mini-circuits  ZX95-1740+ N/A 21+深圳市雄盛鑫电子有限公司

Proper decoupling with 0.1μF ceramic capacitors near the supply pins is essential for stable operation. The device should be handled with ESD precautions during installation. Thermal considerations are minimal due to the low power consumption, but adequate PCB copper area should be provided for the thermal pad in the SOIC package. Input protection may be required if the amplifier interfaces with external sensors or connectors.

商家经验真实案例 · 安全可信
单芯ST转双芯LC
本文详细解析单芯ST光纤连接器转为双芯LC连接器的常见场景、转换方法及注意事项,帮助工程师高效完成光纤接口适配工作。

B2B Procurement Guide

When sourcing OPA241UA, verify the packaging (SOIC-8 is standard) and temperature grade (industrial -40°C to +125°C is typical). Lead times can vary from stock availability to 8-12 weeks for large orders. Consider purchasing through authorized distributors to ensure authenticity, as counterfeit semiconductors are a known industry issue. Volume pricing typically starts at quantities of 1,000 units, with additional discounts for reel packaging (2,500 units per reel).

Related Manufacturers