Aicaigou LogoB2B WikiIndustrial Encyclopedia

OPA1654AIDR

Updated: 2026-07-17

Overview

The OPA1654AIDR is a high-performance operational amplifier (op-amp) developed by Texas Instruments. It is part of the Burr-Brown product line, known for its precision analog components. This op-amp is specifically designed for applications requiring ultra-low noise and high fidelity, such as professional audio systems, medical instrumentation, and precision test equipment. The OPA1654AIDR is packaged in an 8-pin SOIC (Small Outline Integrated Circuit) format, making it suitable for space-constrained designs. Texas Instruments emphasizes the OPA1654AIDR's ability to deliver exceptional audio quality, with a noise density of just 2.9nV/√Hz and a total harmonic distortion (THD) of -120dB. These characteristics make it a preferred choice for high-end audio applications where signal integrity is paramount. The device operates over a wide supply voltage range, enhancing its versatility in various circuits.

Structure and Working Principle

OPA1654AIDR 集成电路(IC) TI德州仪器 封装SOIC14 批号26+深圳市中芯巨能电子有限公司

The OPA1654AIDR integrates a differential input stage, gain stage, and output stage within a single monolithic IC. The differential input stage ensures high common-mode rejection ratio (CMRR), which is critical for rejecting noise in balanced audio signals. The gain stage provides the necessary amplification, while the output stage delivers low-impedance drive capability for connecting to subsequent circuit elements. Internally, the OPA1654AIDR utilizes advanced bipolar junction transistor (BJT) technology to achieve its low-noise performance. The op-amp's architecture is optimized for minimal distortion and high linearity, ensuring accurate signal reproduction. Key to its operation is the use of precision-matched transistors and laser-trimmed resistors, which enhance performance consistency across production batches.

商家经验真实案例 · 安全可信
MOS管参数RG测试方法
本文详细介绍MOS管栅极电阻(RG)的三种测试方法,包括双脉冲法、示波器观测法和专用设备测量法,分析不同场景下的适用性及操作要点,帮助工程师准确评估器件性能。

Key Features

The OPA1654AIDR stands out for its ultra-low noise performance, with a voltage noise density of 2.9nV/√Hz at 1kHz. This makes it ideal for sensitive audio applications where even minor noise can degrade signal quality. The op-amp also boasts a high slew rate of 20V/µs, enabling it to handle fast signal transitions without distortion. Additional features include a wide bandwidth of 40MHz and a low input bias current of ±10pA. These specifications ensure the OPA1654AIDR can handle a broad range of frequencies and maintain precision in high-impedance circuits. The device is also designed for low power consumption, with a typical quiescent current of 3.6mA per amplifier, making it suitable for battery-powered applications.

Application Areas

The OPA1654AIDR is widely used in professional audio equipment, such as mixing consoles, microphone preamplifiers, and high-fidelity headphone amplifiers. Its low-noise characteristics make it particularly valuable in applications where signal clarity is critical, such as recording studios and live sound systems. In the medical field, the OPA1654AIDR is employed in diagnostic equipment like ECG (electrocardiogram) machines and ultrasound systems, where precise signal amplification is essential. Test and measurement instruments, including oscilloscopes and spectrum analyzers, also benefit from the op-amp's high performance. Additionally, industrial control systems use the OPA1654AIDR for accurate sensor signal conditioning.

Maintenance and Precautions

OPA1654AIDR TI/德州仪器 运算SOIC-14 2021+ 电子元器件代理深圳市创芯联盈电子有限公司

To ensure optimal performance and longevity of the OPA1654AIDR, proper handling and circuit design are crucial. Always use electrostatic discharge (ESD) protection when handling the device to prevent damage from static electricity. Avoid exceeding the maximum supply voltage of ±18V, as this can lead to permanent failure. In circuit design, ensure adequate decoupling capacitors are placed near the power supply pins to minimize noise and stabilize voltage levels. Thermal management is generally not a concern for the OPA1654AIDR under normal operating conditions, but prolonged exposure to high temperatures should be avoided. For applications requiring multiple op-amps, consider using a dual or quad version to save board space and simplify design.

商家经验真实案例 · 安全可信
三极管商品配置指南
本文详细解析三极管商品配置的关键要素,包括参数匹配、应用场景适配和品质把控,帮助采购人员高效完成工业品选型。

B2B Procurement Guide

When procuring the OPA1654AIDR in bulk, verify the authenticity of the components by purchasing from authorized distributors or directly from Texas Instruments. Counterfeit parts can lead to performance issues and project delays. Bulk pricing typically ranges from $2.50 to $4.00 per unit, depending on order volume and supplier agreements. Lead times can vary, especially during periods of high demand, so plan procurement well in advance. For custom requirements, such as specific packaging or testing, consult with the manufacturer or distributor to explore available options. Additionally, consider the environmental compliance of the components, ensuring they meet RoHS (Restriction of Hazardous Substances) standards if required for your application.

Related Manufacturers