Overview
Oil demulsifiers are surface-active chemical compounds designed to separate water-in-oil or oil-in-water emulsions. These formulations are critical in petroleum refining, where they facilitate the efficient separation of crude oil components. Modern demulsifiers are typically polymer-based, containing ethylene oxide/propylene oxide copolymers or other specialized surfactants. Their effectiveness depends on the ability to destabilize the interfacial film stabilizing the emulsion.
Physical and Chemical Properties
Industrial demulsifiers exhibit low viscosity and good thermal stability, maintaining effectiveness up to 80-120°C. Their hydrophilic-lipophilic balance (HLB) is carefully formulated to match specific emulsion types. These chemicals are typically neutral to slightly alkaline (pH 7-9) and demonstrate excellent compatibility with various process streams. The surface tension reduction capability ranges from 30-50 mN/m, depending on the formulation and application requirements.
Main Applications
In petroleum production, demulsifiers are injected at wellheads and processing facilities to separate crude oil from produced water. They reduce processing time and improve oil quality by removing water and salts. The wastewater treatment industry utilizes these agents for oil-water separation in API separators and dissolved air flotation systems. Other applications include metalworking fluid recycling and food processing effluent treatment.
Safety and Storage
While generally low in toxicity, demulsifiers require proper handling due to their surfactant properties. Storage tanks should be constructed of polyethylene or stainless steel to prevent contamination. Bulk storage should maintain temperatures between 5-40°C to prevent viscosity changes or component separation. Containers should be kept tightly sealed to prevent moisture absorption and oxidation.
B2B Procurement Guide
Industrial buyers should evaluate demulsifiers based on: 1) emulsion type (W/O or O/W), 2) salinity conditions, 3) temperature requirements, and 4) downstream processing constraints. Pilot testing is recommended for large-volume applications. Leading manufacturers typically offer technical support for product selection and dosage optimization. Minimum order quantities for bulk purchases commonly range from 200-1000 kg, with drum (200L) options available for smaller requirements.
Related Manufacturers
- 主营：破乳剂、反渗透药剂、循环水药剂
- 主营：专用剂、消泡剂、固化剂、原油破乳剂、工业破乳剂、工业污水破乳剂、油田原油破乳剂、活性炭、净化剂、聚合氯化铝、净化澄清剂、表面活性剂、河湖澄清剂、工业级木质粉炭、河湖净化剂、液体菌种、脱氰剂、微生物菌种、固体脱色剂、液体脱色剂、有机物催化酶、杀菌剂、除臭剂、复合碳源
- 主营：补碳剂、澄清剂、处理剂、破乳剂、絮凝剂、固化剂、活性炭、合碳源、锁磷剂、除臭剂、脱氟剂、专用剂、消泡剂、降氟剂、去除剂、净化剂、化合物、降解剂、除氟剂、除泡剂、废水处、净水剂、修复剂、包装桶装、粉末颗粒
- 主营：絮凝剂、除镍剂、除铜剂、破乳剂、污水处理材料、净凡高效除磷剂、碱性除氟剂、脱色剂、阻垢剂、清洗除垢剂
- 主营：消泡剂、活性炭、聚丙烯酰胺、破乳剂、阻垢剂、除垢剂、杀菌灭藻剂、醋酸钠-乙酸钠、工业葡萄糖、纤维球、复合碳源、重金属捕捉剂、除磷剂、除臭剂、除氟剂、氨氮去除剂
- 主营：凝聚剂b、泥浆深度、洗砂污水、脱脂废水破乳剂、油漆废水、聚丙烯酰胺、废水处理剂、循环水处理、漆雾处理剂、油漆上浮剂、油性漆漆渣、净水絮凝剂、漆雾凝聚剂、涂装处理药剂、污水处理药剂、泥浆污水沉淀、喷漆污水处理、处理漆雾凝聚
- 主营：聚丙烯酰胺、聚合硫酸铁、聚合氯化铝、破乳剂、硫酸亚铁、硫酸铝、复合碳源、微生物菌种
- 主营：碳酸铝、防霉剂、氯化铋、破乳剂、氮化硅、硅酸镁、磷酸铝、化学试剂、抗静电剂、乙酸乙酯、氢氧化镁、焦磷酸钠、干燥通风、次磷酸镁、氯化氢乙醇、氯化氢甲醇、聚丙烯酸钾、闪点提高剂、柴油降凝剂、硫代硫酸铵、聚丙烯酰胺、多聚磷酸钠、25公斤纸板桶、硫代乙醇酸钠、高分子絮凝剂
- 主营：消泡剂、杀菌剂、阻垢剂、破乳剂、絮凝剂、清洗剂、重捕剂、除磷剂、除氟剂、除臭剂、重金属捕捉剂、缓蚀阻垢剂、飞灰螯合剂、聚丙烯酰胺、聚合氯化铝、粘泥剥离剂、油水分离剂、杀菌灭藻剂、钝化预膜剂、清洗除垢剂、漆雾凝聚剂、有机硫tmt-15、污泥脱水剂、反渗透阻垢剂、工业污水处理药剂
- 主营：十二烷基苯磺酸钠、十二烷基苯磺酸、十二烷基硫酸钠、污水处理油脂切削液、十二烷基苯磺酸三乙醇胺盐、重烷基苯磺酸钠、石油磺酸钠
- 主营：聚合氯化铝、硫酸铝、乙酸钠、破乳剂、复合碳源、聚合硫酸铁、脱色剂、消泡剂、一体化污水处理设备
- 主营：净水剂、絮凝剂、净水药剂、切削液破乳剂、聚丙烯酰胺、聚合氯化铝、粉状活性炭、醋酸钠、除臭剂、聚醚消泡剂、碳源
- 主营：聚丙烯酰胺、漆雾凝聚剂、AB剂、污水破乳剂、絮凝剂、高分子凝集剂、高分子絮凝剂、泥浆沉淀剂、洗沙絮凝剂、污水消泡剂、重金属捕捉剂
- 主营：金刚砂耐磨地坪材料、白刚玉磨料、金刚砂喷砂除锈、破乳剂、棕刚玉研磨
- 主营：聚丙烯酰胺、菌种、重金属捕捉剂、破乳剂、聚合氯化铝