Overview
Non-shrink materials are engineered compounds designed to maintain volume during curing, critical for precision construction tasks. Developed to address shrinkage issues in conventional cementitious mixes, they incorporate expansive agents or polymers that counteract contraction forces. These materials are classified as hydraulic cements (Type K, M, or S) or polymer-modified systems, with selection depending on load requirements and environmental conditions. Primary industries relying on non-shrink materials include civil engineering, power plant construction, and heavy equipment installation. Their ability to fill voids without air pockets makes them indispensable for applications where structural integrity cannot tolerate movement, such as in nuclear facilities or high-rise steel column bases.
Physical and Chemical Properties
Non-shrink materials exhibit unique rheological properties, including controlled viscosity for pumpability and self-leveling behavior. Their chemical composition often includes calcium sulfoaluminate (CSA) as an expansive agent, which reacts with water to form ettringite crystals that compensate for shrinkage. Typical mix designs achieve 0.01–0.02% expansion during curing. Key performance metrics include 24-hour compressive strength (≥20 MPa) and bond strength (>1.5 MPa). Advanced formulations incorporate corrosion inhibitors for steel-reinforced applications and silica fume for reduced permeability. Thermal properties are also critical, with coefficients of thermal expansion matching concrete (10–14 μm/m·°C) to prevent stress at interfaces.
Main Applications
In industrial settings, non-shrink materials are extensively used for grouting turbine bases, where even micron-level movement could disrupt alignment. They serve as the standard for anchoring refinery equipment, with ASTM C1107 compliance often required. Bridge bearing pad installations utilize their creep resistance under sustained loads. Specialized applications include seismic retrofitting of historical structures, where non-shrink mortars provide strength without altering load distribution. The materials are also adapted for 3D printing in construction, with modified versions offering thixotropy for layer adhesion. Emerging uses include offshore wind turbine installations, requiring materials that cure underwater without shrinkage.
Safety and Storage
Handling requires NIOSH-approved N95 masks due to alkaline dust hazards, particularly with cement-based formulations. Worksite ventilation is mandatory when mixing large quantities indoors. Uncured material presents pH values of 12–13, necessitating acid-resistant gloves and eye protection. Storage life ranges from 6–12 months in unopened moisture-barrier bags. Bulk silo storage requires desiccant systems to prevent premature hydration. Temperature control is vital – materials exposed to >40°C may experience reduced expansive properties. Field testing with shrinkage cones (per ASTM C1090) should verify performance before large-scale application.
B2B Procurement Guide
Industrial buyers should specify performance criteria: shrinkage/expansion range (±0.02%), chloride content (<0.1% by mass for steel contact), and rheological properties like flow diameter (≥250mm per ASTM C1437). Request third-party test reports for creep behavior under sustained load (≥70% of compressive strength). For cost optimization, consider bulk purchasing with just-in-time delivery to minimize storage costs. Evaluate suppliers offering technical support for mix design adjustments based on job site conditions. Leading manufacturers provide mobile batch plants for projects requiring continuous grouting operations exceeding 50 metric tons.
Related Manufacturers
- 主营：[]
- 主营：[]
- 主营：[]
- 主营：[]
- 主营：电动伸缩门、不锈钢电动伸缩门、电动卷闸门、无轨电动伸缩门、电动水晶门、道闸、悬浮门、分段平移门、段滑门、直线门、铝合金电动伸缩门、车辆识别、空降闸、广告道闸、直杆道闸、栅栏道闸、人行通道闸、人脸识别、电动小门、电动卷帘门、车牌识别、有轨电动伸缩门、快速卷帘门、电动门、电动通花闸
- 主营：灌缝胶、伸缩缝、修补胶、维修材料、沥青砂、灌浆料、压浆料、植筋胶、混凝土、修补料、坑槽修、蓄水池、速凝灰、泥注浆、修复剂、丙乳砂浆、轨道封槽、轨道填充、路面修补、维修堵漏、地面垫层、跑道维修、涂装涂料、裂缝修复、喷涂砂浆
- 主营：压浆料、道钉锚固剂、树脂灌浆料、高强无收缩灌浆料、防碳化涂料、水泥路面修补料、灌浆料
- 主营：修补料、管道压浆料、聚合物砂浆、无收缩水泥基灌浆料、水泥基灌浆料、桥梁支座灌浆料
- 主营：聚合物修补加固砂浆、水泥基灌浆料、环氧树脂灌浆料、高强无收缩灌浆料、道路快速修补料、聚合物防水防腐砂浆、聚丙烯乳液砂浆、环氧树脂胶泥、环氧树脂砂浆、水泥基渗透结晶防水涂料、混凝土防碳化涂料、环氧灌浆树脂胶、裂缝空鼓胶、环氧树脂植筋胶、环氧树脂粘钢胶、环氧树脂碳布胶、环氧树脂界面胶、J302环氧界面剂、J303混凝土起沙处理剂、EC-1高强界面剂、108浓缩建筑胶粉、环氧树脂涂料、水泥基自流平砂浆、碳纤维布
- 主营：高强灌浆料、双快水泥、膨胀水泥、高强无收缩灌浆料、无收缩水泥、道路快修补料、瓷砖粘合剂、内外墙腻子粉、保温砂浆、快干水泥、水泥灌浆料、支座灌浆料、二次灌浆料、速干水泥、速凝水泥、陶瓷砖粘合剂、抹面抗裂砂浆、抗裂砂浆、外墙保温砂浆、外墙水泥基
- 主营：抹灰石膏、天然石粉、石膏消泡剂、高强无收缩灌浆料、瓷砖粘结剂、石膏基砌筑砂浆、防静电不发火砂浆、腻子粉、高延性混凝土、灌浆料
- 主营：环氧树脂砂浆、双组分聚合物砂浆、改性环氧聚合物砂浆、特种铝酸盐无机防腐砂浆、伸缩缝快速修补材料、UHPC超高性能混凝土、快速修补砂浆、灌浆料、环氧灌浆料、钢筋阻锈剂、环氧修补砂浆、支座灌浆料、丙乳砂浆、聚丙烯酸酯乳液水泥砂浆、高延性混凝土、界面剂、高强聚合物砂浆、路面修补砂浆、混凝土增强剂
- 主营：ALC板材粘结剂、轻质抹灰石膏、玻化微珠砂浆、高强无收缩灌浆料、收缩灌浆料、水泥路面修补剂、强力瓷砖胶、耐水腻子粉、粘结砂浆、外墙柔性腻子粉、粉刷石膏、嵌缝石膏、抗裂砂浆、砌筑砂浆、抹灰砂浆、真石漆专用腻子粉、防霉耐水腻子粉、防水砂浆、钢化干粉墙漆、混凝土界面处理剂、乳胶漆、腻子粉、板材粘结剂、聚合物粘结砂浆、聚合物抗裂抹面砂浆
- 主营：彩色路面材料、彩色陶瓷颗粒
- 主营：内外墙腻子粉、水泥基外墙腻子粉、保温砂浆、地面找平材料、粉刷石膏、抗裂砂浆、抹灰砂浆、砌筑砂浆、水泥自流平、石膏砂浆、石膏自流平、轻质抹灰石膏、聚合物抗裂砂浆、防水砂浆、道路快速修补砂浆、瓷砖胶泥、墙地固
- 主营：道路修补料、聚合物水泥砂浆、聚合物防水砂浆、高强无收缩灌浆料、高分子益胶泥、环氧树脂砂浆、环氧树脂胶泥、环氧粘钢胶、环氧树脂碳布胶、108胶粉、聚合物修补砂浆、混凝土界面剂、地面起沙处理剂、自流平砂浆、裂缝修补胶、聚合物防水胶泥、混凝土空鼓修补胶、环氧修补砂浆、灌浆树脂胶、聚合物防水防腐砂浆、道路抢修料、混凝土色差修补剂、混凝土防碳化涂料、环氧树脂界面胶
- 主营：火山石、火山岩、火山石板、硅藻土、高强无收缩灌浆料、氧化钙、竹炭、活性炭、铁粉、松树皮、灌浆料、萤石、云母、陶粒、膨润土、硫自养、石英砂、火山石粉、重晶石粉、蛭石、硫酸钡、果木炭粉
- 主营：环氧胶泥、道路快速修补料、聚合物改性水泥砂浆、高强无收缩灌浆料、水泥基渗透结晶、混凝土防碳化涂料、环氧树脂砂浆、聚合物防水砂浆、水泥自流平、丙乳砂浆、环氧粘钢胶、环氧植筋胶、环氧碳布胶、裂缝修补胶、界面剂、108胶粉、环氧界面胶、封缝胶、环氧树脂注浆液
- 主营：高强聚合物修补砂浆、地面修补剂、混凝土防碳化涂料、超高强无收缩灌浆料、环氧树脂砂浆、防腐砂浆、不发火混凝土、混凝土钢筋阻锈剂