Aicaigou LogoB2B WikiIndustrial Encyclopedia

Non-intumescent Fireproof Coating

Updated: 2026-08-29

Overview

Intumescent fireproof coating is a reactive material designed to protect load-bearing structures from fire. When exposed to temperatures above 200°C, its chemical components decompose to release gases, forming a foamed carbonaceous char layer. This layer insulates the substrate, delaying temperature rise and structural failure. Unlike cementitious or non-intumescent coatings, it maintains a thin profile until activated, making it preferred for architectural steel where aesthetics matter. Modern formulations meet stringent standards like UL 263 or EN 13381, with fire resistance durations ranging from 30 minutes to 4 hours.

Physical and Chemical Properties

耐博仕钢结构防火涂料非膨胀型耐高温阻燃防火漆屋顶隔热水性防腐广东财领头新材料有限公司

The coating typically comprises three functional components: an acid source (e.g., ammonium polyphosphate), a carbon donor (e.g., pentaerythritol), and a blowing agent (e.g., melamine). These react endothermically, absorbing heat while expanding. Water-based versions dominate due to eco-friendliness, though solvent-based alternatives offer faster drying. Key metrics include expansion ratio (measured via furnace tests), adhesion strength (≥1 MPa), and thermal conductivity of the char (<0.1 W/m·K). Accelerated aging tests assess durability under UV/humidity.

商家经验真实案例 · 安全可信
外墙保温涂料报价
本文从外墙保温涂料的类型、价格影响因素到选购建议,系统解析报价背后的逻辑,帮助用户理解市场行情并做出合理决策。

Main Applications

Primary use cases include structural steel columns/beams in high-rises, offshore platforms, and tunnels. It’s also applied to wooden trusses and concrete where spalling prevention is critical. Industrial settings like oil refineries specify thicker applications for hydrocarbon fire scenarios (e.g., UL 1709). Specialty variants exist for electrical cables and ductwork. Architects favor thin-film intumescents (1–3 mm dry film thickness) for exposed steel in open-plan designs.

Safety and Storage

室外 非膨胀型 厚型钢结构防火涂料 弹性好 韧性好 抗变形能力强河北拓展伟业科技发展有限公司

Pre-mixed coatings are stable if stored properly but may separate—stir before use. Shelf life is typically 12 months. Avoid application below 5°C or above 90% humidity to prevent curing issues. During application, wear NIOSH-approved respirators for solvent-based types. Waste disposal must follow local regulations due to polymer content. Fire-tested assemblies should never be modified, as this voids certifications.

商家经验真实案例 · 安全可信
水泥浆粘铝合金去除
本文针对水泥浆粘附铝合金的清理难题,提供三种实用解决方案,包括物理刮除法、化学溶解法和预防保护措施,帮助读者高效处理这类常见问题。

B2B Procurement Guide

Buyers should prioritize third-party certifications (e.g., FM Approvals, IMO) over manufacturer claims. Request test reports for the exact substrate/thickness combination needed. Bulk orders (200+ kg drums) reduce costs by 15–20%. Lead times vary: stock products ship in 1–2 weeks, while custom colors/formulations take 4–6 weeks. Specify application method (spray, brush, or roller) to ensure viscosity compatibility.

Related Manufacturers